* test(#3685): failing-first regression coverage for phase-complete write flags `phase complete` reports `roadmap_updated`/`state_updated` from `fs.existsSync(path)`, so both read `true` whenever the file merely exists — including when the transaction wrote nothing. Add the regression tests that prove it, plus the negative-space and true-direction pins, before the fix. New in tests/phase.test.cjs: - roadmap_updated is false when the transaction rewrites nothing (FAILS today) - state_updated is false when the transaction rewrites nothing, and stays false on a third consecutive run (FAILS today) - both flags are true when the transaction genuinely rewrites (pins the true direction so the fix cannot be tightened into always-false) - each flag stays false when its file is absent The STATE.md cases pin the clock via GSD_TEST_MODE + GSD_NOW_MS (src/clock.cts:43-70) because syncStateFrontmatter stamps a millisecond-resolution `last_updated:` on every write, which would otherwise make the no-op unobservable. Also strengthens four pre-existing `=== true` assertions on these fields that passed vacuously: each now pairs the flag assertion with a content-changed assertion against a pre-call snapshot, so the `true` is earned. Refs #3685 * fix(#3685): report phase-complete write flags from the transaction, not the filesystem `phase complete` computed `roadmap_updated` and `state_updated` as `fs.existsSync(path)`, so both read `true` for any project that had the file at all — including a run that rewrote nothing. The flags are the only signal a caller has that the rollup landed, so a no-op was indistinguishable from a successful write and a stale ROADMAP went unnoticed until something downstream read wrong numbers. Both flags now reflect whether that file's content actually changed in the transaction, computed at the existing `writes.push({filePath, before, after})` sites — the same contract `requirements_updated` has honored since #2316-3, and the same correction #2640/#2974 already applied to `phase remove`. Nothing about what gets written changes; only what gets reported. Fixes #3685 * chore(changeset): backfill PR number for #3685 fragment --------- Co-authored-by: sim <sim@local>
This commit is contained in:
5
.changeset/brave-birds-travel.md
Normal file
5
.changeset/brave-birds-travel.md
Normal file
@@ -0,0 +1,5 @@
|
|||||||
|
---
|
||||||
|
type: Fixed
|
||||||
|
pr: 3826
|
||||||
|
---
|
||||||
|
**`phase complete` now reports `roadmap_updated` and `state_updated` honestly** — both flags read `fs.existsSync()`, so they were `true` for any project that had the file at all, and a rollup that silently wrote nothing was indistinguishable from one that landed. Each flag now reflects whether that file's content actually changed in the transaction, matching the contract `requirements_updated` already honored. (#3685)
|
||||||
@@ -2261,6 +2261,12 @@ function cmdPhaseComplete(cwd: string, phaseNum: string, raw: boolean): void {
|
|||||||
? (phaseInfo['summaries'] as string[]).length
|
? (phaseInfo['summaries'] as string[]).length
|
||||||
: 0;
|
: 0;
|
||||||
let requirementsUpdated = false;
|
let requirementsUpdated = false;
|
||||||
|
// #3685: mirror requirementsUpdated's diff-tracking contract at the
|
||||||
|
// writes.push({filePath, before, after}) sites below, rather than
|
||||||
|
// reporting via fs.existsSync (which is true whenever the file merely
|
||||||
|
// exists, not when the transaction actually wrote a change).
|
||||||
|
let roadmapUpdated = false;
|
||||||
|
let stateUpdated = false;
|
||||||
|
|
||||||
const warnings: string[] = [];
|
const warnings: string[] = [];
|
||||||
// ADR-3408 §8.5 / D2 (#3374): "liberal but visible" — when the write-seam
|
// ADR-3408 §8.5 / D2 (#3374): "liberal but visible" — when the write-seam
|
||||||
@@ -2680,6 +2686,7 @@ function cmdPhaseComplete(cwd: string, phaseNum: string, raw: boolean): void {
|
|||||||
before: originalRoadmapContent,
|
before: originalRoadmapContent,
|
||||||
after: roadmapContent,
|
after: roadmapContent,
|
||||||
});
|
});
|
||||||
|
roadmapUpdated = roadmapContent !== originalRoadmapContent;
|
||||||
|
|
||||||
const reqPath = path.join(planningDir(cwd), 'REQUIREMENTS.md');
|
const reqPath = path.join(planningDir(cwd), 'REQUIREMENTS.md');
|
||||||
if (fs.existsSync(reqPath)) {
|
if (fs.existsSync(reqPath)) {
|
||||||
@@ -3253,6 +3260,7 @@ function cmdPhaseComplete(cwd: string, phaseNum: string, raw: boolean): void {
|
|||||||
}
|
}
|
||||||
|
|
||||||
writes.push({ filePath: statePath, before: originalStateContent, after: stateContent });
|
writes.push({ filePath: statePath, before: originalStateContent, after: stateContent });
|
||||||
|
stateUpdated = stateContent !== originalStateContent;
|
||||||
}
|
}
|
||||||
|
|
||||||
anyPlanningWrite = writePlanningFileSet(writes) > 0;
|
anyPlanningWrite = writePlanningFileSet(writes) > 0;
|
||||||
@@ -3319,8 +3327,8 @@ function cmdPhaseComplete(cwd: string, phaseNum: string, raw: boolean): void {
|
|||||||
next_phase_name: nextPhaseName,
|
next_phase_name: nextPhaseName,
|
||||||
is_last_phase: isLastPhase,
|
is_last_phase: isLastPhase,
|
||||||
date: today,
|
date: today,
|
||||||
roadmap_updated: fs.existsSync(roadmapPath),
|
roadmap_updated: roadmapUpdated,
|
||||||
state_updated: fs.existsSync(statePath),
|
state_updated: stateUpdated,
|
||||||
requirements_updated: requirementsUpdated,
|
requirements_updated: requirementsUpdated,
|
||||||
auto_pruned: autoPruned,
|
auto_pruned: autoPruned,
|
||||||
warnings,
|
warnings,
|
||||||
|
|||||||
@@ -3181,6 +3181,7 @@ Plans:
|
|||||||
path.join(tmpDir, '.planning', 'STATE.md'),
|
path.join(tmpDir, '.planning', 'STATE.md'),
|
||||||
`---\ngsd_state_version: 1.0\ncurrent_phase: 1\nprogress:\n total_phases: 2\n completed_phases: 0\n percent: 0\n---\n\n# State\n\nTotal Phases: 2\n`,
|
`---\ngsd_state_version: 1.0\ncurrent_phase: 1\nprogress:\n total_phases: 2\n completed_phases: 0\n percent: 0\n---\n\n# State\n\nTotal Phases: 2\n`,
|
||||||
);
|
);
|
||||||
|
const beforeState = fs.readFileSync(path.join(tmpDir, '.planning', 'STATE.md'), 'utf-8');
|
||||||
|
|
||||||
const result = runGsdTools('phase remove 2', tmpDir);
|
const result = runGsdTools('phase remove 2', tmpDir);
|
||||||
assert.ok(result.success, `Command failed: ${result.error}`);
|
assert.ok(result.success, `Command failed: ${result.error}`);
|
||||||
@@ -3188,6 +3189,9 @@ Plans:
|
|||||||
assert.strictEqual(out.state_updated, true, 'state_updated must be true when STATE.md content changed');
|
assert.strictEqual(out.state_updated, true, 'state_updated must be true when STATE.md content changed');
|
||||||
// Body 'Total Phases:' must be decremented from 2 to 1.
|
// Body 'Total Phases:' must be decremented from 2 to 1.
|
||||||
const afterState = fs.readFileSync(path.join(tmpDir, '.planning', 'STATE.md'), 'utf-8');
|
const afterState = fs.readFileSync(path.join(tmpDir, '.planning', 'STATE.md'), 'utf-8');
|
||||||
|
// #3685: earn the `true` above — assert the file's content actually
|
||||||
|
// differs from the pre-call snapshot, not merely that it exists.
|
||||||
|
assert.notEqual(afterState, beforeState, '#3685: STATE.md content must actually change when state_updated is true');
|
||||||
const bodyMatch = afterState.match(/^Total Phases:\s*(\d+)/m);
|
const bodyMatch = afterState.match(/^Total Phases:\s*(\d+)/m);
|
||||||
assert.ok(bodyMatch, 'body must have Total Phases field after remove');
|
assert.ok(bodyMatch, 'body must have Total Phases field after remove');
|
||||||
assert.strictEqual(bodyMatch[1], '1', `body 'Total Phases:' must be 1 after removing one of 2 phases; got ${bodyMatch[1]}`);
|
assert.strictEqual(bodyMatch[1], '1', `body 'Total Phases:' must be 1 after removing one of 2 phases; got ${bodyMatch[1]}`);
|
||||||
@@ -3327,6 +3331,132 @@ describe('phase complete canonical verification gate (#1522)', () => {
|
|||||||
});
|
});
|
||||||
});
|
});
|
||||||
|
|
||||||
|
// #3685: cmdPhaseComplete's roadmap_updated/state_updated flags were computed
|
||||||
|
// via fs.existsSync(roadmapPath) / fs.existsSync(statePath) — true whenever
|
||||||
|
// the file merely EXISTS, even when the transaction rewrote nothing. The
|
||||||
|
// sibling requirements_updated (line ~2951 in src/phase.cts) already honors
|
||||||
|
// the correct contract: true only when that file's content actually changed
|
||||||
|
// in the transaction. Clock is pinned (GSD_TEST_MODE + GSD_NOW_MS) because
|
||||||
|
// syncStateFrontmatter stamps a millisecond-resolution `last_updated:` field
|
||||||
|
// on every STATE.md write pass — an unpinned second run would genuinely
|
||||||
|
// differ by that timestamp alone, masking the no-op these tests need to
|
||||||
|
// observe (see .gsd/bug/fix-3685-phase-complete-write-flags/repro-pinned.cjs
|
||||||
|
// for the standalone reproduction).
|
||||||
|
describe('phase complete write-flag content-change contract (#3685)', () => {
|
||||||
|
let tmpDir;
|
||||||
|
const PINNED_CLOCK_ENV = { GSD_TEST_MODE: '1', GSD_NOW_MS: '1750000000000' };
|
||||||
|
|
||||||
|
beforeEach(() => {
|
||||||
|
tmpDir = createTempProject();
|
||||||
|
});
|
||||||
|
|
||||||
|
afterEach(() => {
|
||||||
|
cleanup(tmpDir);
|
||||||
|
});
|
||||||
|
|
||||||
|
test('roadmap_updated is false when the transaction rewrites nothing (#3685)', () => {
|
||||||
|
writePhaseCompleteVerificationGateFixture(tmpDir, 'passed');
|
||||||
|
const roadmapPath = path.join(tmpDir, '.planning', 'ROADMAP.md');
|
||||||
|
|
||||||
|
const run1 = runVerifiedPhaseComplete(['phase', 'complete', '1'], tmpDir, PINNED_CLOCK_ENV);
|
||||||
|
assert.ok(run1.success, `first phase complete failed: ${run1.error}`);
|
||||||
|
const roadmapAfter1 = fs.readFileSync(roadmapPath, 'utf-8');
|
||||||
|
|
||||||
|
// Second call: phase 1 is already complete, so this is a genuine no-op
|
||||||
|
// against ROADMAP.md. Re-write the passed marker first so the #1522
|
||||||
|
// verification gate does not itself refuse the second call.
|
||||||
|
const run2 = runVerifiedPhaseComplete(['phase', 'complete', '1'], tmpDir, PINNED_CLOCK_ENV);
|
||||||
|
assert.ok(run2.success, `second phase complete failed: ${run2.error}`);
|
||||||
|
const roadmapAfter2 = fs.readFileSync(roadmapPath, 'utf-8');
|
||||||
|
|
||||||
|
assert.equal(roadmapAfter2, roadmapAfter1, 'ROADMAP.md must be byte-identical across the no-op second run');
|
||||||
|
const parsed2 = JSON.parse(run2.output);
|
||||||
|
assert.strictEqual(
|
||||||
|
parsed2.roadmap_updated, false,
|
||||||
|
'fs.existsSync() reported true here, masking the no-op (#3685)',
|
||||||
|
);
|
||||||
|
});
|
||||||
|
|
||||||
|
test('state_updated is false when the transaction rewrites nothing (#3685)', () => {
|
||||||
|
writePhaseCompleteVerificationGateFixture(tmpDir, 'passed');
|
||||||
|
const statePath = path.join(tmpDir, '.planning', 'STATE.md');
|
||||||
|
|
||||||
|
const run1 = runVerifiedPhaseComplete(['phase', 'complete', '1'], tmpDir, PINNED_CLOCK_ENV);
|
||||||
|
assert.ok(run1.success, `first phase complete failed: ${run1.error}`);
|
||||||
|
const stateAfter1 = fs.readFileSync(statePath, 'utf-8');
|
||||||
|
|
||||||
|
const run2 = runVerifiedPhaseComplete(['phase', 'complete', '1'], tmpDir, PINNED_CLOCK_ENV);
|
||||||
|
assert.ok(run2.success, `second phase complete failed: ${run2.error}`);
|
||||||
|
const stateAfter2 = fs.readFileSync(statePath, 'utf-8');
|
||||||
|
|
||||||
|
assert.equal(stateAfter2, stateAfter1, 'STATE.md must be byte-identical across the no-op second run');
|
||||||
|
const parsed2 = JSON.parse(run2.output);
|
||||||
|
assert.strictEqual(
|
||||||
|
parsed2.state_updated, false,
|
||||||
|
'fs.existsSync() reported true here, masking the no-op (#3685)',
|
||||||
|
);
|
||||||
|
const roadmapAfter2 = fs.readFileSync(path.join(tmpDir, '.planning', 'ROADMAP.md'), 'utf-8');
|
||||||
|
|
||||||
|
// Stability across repeats: the flag must not alternate true/false on
|
||||||
|
// successive no-op runs — pin a THIRD call to the same behavior.
|
||||||
|
const run3 = runVerifiedPhaseComplete(['phase', 'complete', '1'], tmpDir, PINNED_CLOCK_ENV);
|
||||||
|
assert.ok(run3.success, `third phase complete failed: ${run3.error}`);
|
||||||
|
const stateAfter3 = fs.readFileSync(statePath, 'utf-8');
|
||||||
|
const roadmapAfter3 = fs.readFileSync(path.join(tmpDir, '.planning', 'ROADMAP.md'), 'utf-8');
|
||||||
|
assert.equal(stateAfter3, stateAfter2, 'STATE.md must remain byte-identical on a third no-op run');
|
||||||
|
assert.equal(roadmapAfter3, roadmapAfter2, 'ROADMAP.md must remain byte-identical on a third no-op run');
|
||||||
|
const parsed3 = JSON.parse(run3.output);
|
||||||
|
assert.strictEqual(parsed3.roadmap_updated, false, 'roadmap_updated must stay false, not alternate, on repeat no-ops (#3685)');
|
||||||
|
assert.strictEqual(parsed3.state_updated, false, 'state_updated must stay false, not alternate, on repeat no-ops (#3685)');
|
||||||
|
});
|
||||||
|
|
||||||
|
test('both write flags are true when the transaction genuinely rewrites (#3685)', () => {
|
||||||
|
writePhaseCompleteVerificationGateFixture(tmpDir, 'passed');
|
||||||
|
const roadmapPath = path.join(tmpDir, '.planning', 'ROADMAP.md');
|
||||||
|
const statePath = path.join(tmpDir, '.planning', 'STATE.md');
|
||||||
|
const roadmapBefore = fs.readFileSync(roadmapPath, 'utf-8');
|
||||||
|
const stateBefore = fs.readFileSync(statePath, 'utf-8');
|
||||||
|
|
||||||
|
const result = runGsdTools(['phase', 'complete', '1'], tmpDir, PINNED_CLOCK_ENV);
|
||||||
|
assert.ok(result.success, `phase complete failed: ${result.error}`);
|
||||||
|
const parsed = JSON.parse(result.output);
|
||||||
|
|
||||||
|
const roadmapAfter = fs.readFileSync(roadmapPath, 'utf-8');
|
||||||
|
const stateAfter = fs.readFileSync(statePath, 'utf-8');
|
||||||
|
|
||||||
|
assert.notEqual(roadmapAfter, roadmapBefore, 'precondition: ROADMAP.md content must actually change');
|
||||||
|
assert.strictEqual(parsed.roadmap_updated, true, 'roadmap_updated must be true for a genuine rewrite');
|
||||||
|
assert.notEqual(stateAfter, stateBefore, 'precondition: STATE.md content must actually change');
|
||||||
|
assert.strictEqual(parsed.state_updated, true, 'state_updated must be true for a genuine rewrite');
|
||||||
|
});
|
||||||
|
|
||||||
|
test('roadmap_updated stays false when ROADMAP.md is absent (#3685)', () => {
|
||||||
|
writePhaseCompleteVerificationGateFixture(tmpDir, 'passed');
|
||||||
|
// Deletes a single fixture FILE inside tmpDir (not the temp dir itself);
|
||||||
|
// helpers.cleanup() is a directory-removal helper and cannot be used here.
|
||||||
|
// eslint-disable-next-line local/no-raw-rmsync-in-tests -- single-file delete, not a directory
|
||||||
|
fs.rmSync(path.join(tmpDir, '.planning', 'ROADMAP.md'));
|
||||||
|
|
||||||
|
const result = runVerifiedPhaseComplete(['phase', 'complete', '1'], tmpDir, PINNED_CLOCK_ENV);
|
||||||
|
assert.ok(result.success, `phase complete failed without ROADMAP.md: ${result.error}`);
|
||||||
|
const parsed = JSON.parse(result.output);
|
||||||
|
assert.strictEqual(parsed.roadmap_updated, false, 'roadmap_updated must be false when ROADMAP.md does not exist (#3685)');
|
||||||
|
});
|
||||||
|
|
||||||
|
test('state_updated stays false when STATE.md is absent (#3685)', () => {
|
||||||
|
writePhaseCompleteVerificationGateFixture(tmpDir, 'passed');
|
||||||
|
// Deletes a single fixture FILE inside tmpDir (not the temp dir itself);
|
||||||
|
// helpers.cleanup() is a directory-removal helper and cannot be used here.
|
||||||
|
// eslint-disable-next-line local/no-raw-rmsync-in-tests -- single-file delete, not a directory
|
||||||
|
fs.rmSync(path.join(tmpDir, '.planning', 'STATE.md'));
|
||||||
|
|
||||||
|
const result = runVerifiedPhaseComplete(['phase', 'complete', '1'], tmpDir, PINNED_CLOCK_ENV);
|
||||||
|
assert.ok(result.success, `phase complete failed without STATE.md: ${result.error}`);
|
||||||
|
const parsed = JSON.parse(result.output);
|
||||||
|
assert.strictEqual(parsed.state_updated, false, 'state_updated must be false when STATE.md does not exist (#3685)');
|
||||||
|
});
|
||||||
|
});
|
||||||
|
|
||||||
// #2648: phase.complete used to gate only on a single *-VERIFICATION.md status,
|
// #2648: phase.complete used to gate only on a single *-VERIFICATION.md status,
|
||||||
// so a phase could close "complete" while an arbitrary number of its plans had
|
// so a phase could close "complete" while an arbitrary number of its plans had
|
||||||
// no completion record (confirmed production incident: 6/30 plans unexecuted,
|
// no completion record (confirmed production incident: 6/30 plans unexecuted,
|
||||||
@@ -6612,12 +6742,17 @@ describe('bug-3287 — init plan-phase exposes expected_phase_dir with project_c
|
|||||||
test('full consistency check: all STATE.md fields are coherent after phase.complete', () => {
|
test('full consistency check: all STATE.md fields are coherent after phase.complete', () => {
|
||||||
setupPhase3517Project(tmpDir);
|
setupPhase3517Project(tmpDir);
|
||||||
const statePath = path.join(tmpDir, '.planning', 'STATE.md');
|
const statePath = path.join(tmpDir, '.planning', 'STATE.md');
|
||||||
|
const stateBefore = fs.readFileSync(statePath, 'utf8');
|
||||||
|
|
||||||
const r = runSdkQuery(['phase.complete', '5'], tmpDir);
|
const r = runSdkQuery(['phase.complete', '5'], tmpDir);
|
||||||
assert.ok(r.success, `call failed: ${r.error}`);
|
assert.ok(r.success, `call failed: ${r.error}`);
|
||||||
assert.equal(r.data?.state_updated, true, 'state_updated must be true');
|
assert.equal(r.data?.state_updated, true, 'state_updated must be true');
|
||||||
|
|
||||||
const state = fs.readFileSync(statePath, 'utf8');
|
const state = fs.readFileSync(statePath, 'utf8');
|
||||||
|
// #3685: earn the `true` above — assert STATE.md's content actually
|
||||||
|
// changed, not merely that it exists (which is all the pre-fix
|
||||||
|
// existsSync-based flag proved).
|
||||||
|
assert.notEqual(state, stateBefore, '#3685: STATE.md content must actually change when state_updated is true');
|
||||||
|
|
||||||
const fm = extractFrontmatter(state);
|
const fm = extractFrontmatter(state);
|
||||||
assert.equal(
|
assert.equal(
|
||||||
@@ -11132,10 +11267,15 @@ describe('#2572: phase complete warns when a SUMMARY claims files that never lan
|
|||||||
test('#2572-2: the advisory is ADVISORY — completion still succeeds and reports the phase complete', () => {
|
test('#2572-2: the advisory is ADVISORY — completion still succeeds and reports the phase complete', () => {
|
||||||
const { tmpDir } = build2572SummaryArtifactFixture();
|
const { tmpDir } = build2572SummaryArtifactFixture();
|
||||||
try {
|
try {
|
||||||
|
const stateBefore = fs.readFileSync(path.join(tmpDir, '.planning', 'STATE.md'), 'utf-8');
|
||||||
const { output } = runVerifiedPhaseComplete(['phase', 'complete', '1'], tmpDir);
|
const { output } = runVerifiedPhaseComplete(['phase', 'complete', '1'], tmpDir);
|
||||||
const parsed = JSON.parse(output);
|
const parsed = JSON.parse(output);
|
||||||
assert.strictEqual(parsed.completed_phase, '1', '#2572-2 FAILED: completion must not be blocked by the advisory');
|
assert.strictEqual(parsed.completed_phase, '1', '#2572-2 FAILED: completion must not be blocked by the advisory');
|
||||||
assert.strictEqual(parsed.state_updated, true, '#2572-2 FAILED: STATE.md must still be written');
|
assert.strictEqual(parsed.state_updated, true, '#2572-2 FAILED: STATE.md must still be written');
|
||||||
|
// #3685: earn the `true` above — assert STATE.md's content actually
|
||||||
|
// differs from the pre-call snapshot.
|
||||||
|
const stateAfter = fs.readFileSync(path.join(tmpDir, '.planning', 'STATE.md'), 'utf-8');
|
||||||
|
assert.notEqual(stateAfter, stateBefore, '#3685: STATE.md content must actually change when state_updated is true');
|
||||||
} finally {
|
} finally {
|
||||||
cleanup(tmpDir);
|
cleanup(tmpDir);
|
||||||
}
|
}
|
||||||
@@ -11879,11 +12019,15 @@ describe('bug #3572: phase remove must not corrupt STATE.md into two frontmatter
|
|||||||
// targetDir !== null, and the body lacks Total Phases/of-N — the trigger.
|
// targetDir !== null, and the body lacks Total Phases/of-N — the trigger.
|
||||||
let r = runGsdTools('phase insert 1 "Inserted probe"', tmpDir);
|
let r = runGsdTools('phase insert 1 "Inserted probe"', tmpDir);
|
||||||
assert.ok(r.success, `phase insert failed: ${r.error}`);
|
assert.ok(r.success, `phase insert failed: ${r.error}`);
|
||||||
|
const stateBeforeRemove = fs.readFileSync(path.join(tmpDir, '.planning', 'STATE.md'), 'utf-8');
|
||||||
r = runGsdTools('phase remove 1.1', tmpDir);
|
r = runGsdTools('phase remove 1.1', tmpDir);
|
||||||
assert.ok(r.success, `phase remove failed: ${r.error}`);
|
assert.ok(r.success, `phase remove failed: ${r.error}`);
|
||||||
assert.strictEqual(JSON.parse(r.output).state_updated, true, 'the #2640 resync must still happen');
|
assert.strictEqual(JSON.parse(r.output).state_updated, true, 'the #2640 resync must still happen');
|
||||||
|
|
||||||
const after = fs.readFileSync(path.join(tmpDir, '.planning', 'STATE.md'), 'utf-8');
|
const after = fs.readFileSync(path.join(tmpDir, '.planning', 'STATE.md'), 'utf-8');
|
||||||
|
// #3685: earn the `true` above — assert STATE.md's content actually
|
||||||
|
// differs from the snapshot taken immediately before the remove call.
|
||||||
|
assert.notEqual(after, stateBeforeRemove, '#3685: STATE.md content must actually change when state_updated is true');
|
||||||
assert.ok(after.startsWith('---\n') || after.startsWith('---\r\n'), 'file must still OPEN with the frontmatter fence');
|
assert.ok(after.startsWith('---\n') || after.startsWith('---\r\n'), 'file must still OPEN with the frontmatter fence');
|
||||||
assert.strictEqual(fenceLineCount(after), 2, `exactly one frontmatter block (2 fence lines); got ${fenceLineCount(after)}:\n${after.slice(0, 400)}`);
|
assert.strictEqual(fenceLineCount(after), 2, `exactly one frontmatter block (2 fence lines); got ${fenceLineCount(after)}:\n${after.slice(0, 400)}`);
|
||||||
assert.strictEqual((after.match(/gsd_state_version/g) || []).length, 1, 'exactly one gsd_state_version — no second derived block');
|
assert.strictEqual((after.match(/gsd_state_version/g) || []).length, 1, 'exactly one gsd_state_version — no second derived block');
|
||||||
|
|||||||
Reference in New Issue
Block a user