* test(#2971): failing-first suite for the pr-branch planning-path filter Binds the not-yet-built planning.pr_strict mode and the corrected filter recipe for /gsd-pr-branch across six layers: pure classification and forbidden-path predicates, real-git fixtures that run the cherry-pick filter loop end to end, config-key registration through the real CLI and both manifests, the executed worktree-materialization claim the issue's triage asked to establish, fast-check properties over arbitrary path sets, and a drift guard over the shipped workflow. Two live defects in today's shipped recipe are pinned as regressions, both reproduced empirically first: `git rm -r --cached` stages a deletion of any .planning/ path the target branch already tracks, so the generated PR removes the base branch's planning files; and the same command leaves the cherry-picked file untracked on disk, so a second commit touching that path aborts the pick with "untracked working tree files would be overwritten" and every remaining commit is silently dropped. The test helper parses the canonical path lists out of gsd-core/workflows/pr-branch.md rather than restating them, so the workflow stays the single source of truth and the suite cannot drift from what ships. Refs #2971 * feat(#2971): strict planning filter mode for /gsd-pr-branch Adds planning.pr_strict — a boolean, default false, that selects what /gsd-pr-branch means by "filtered". Default mode is unchanged: structural planning state survives into the PR branch and the nine transient subdirectories do not. Strict mode drops every .planning/ path, structural files included, and carries a commit over only when it touches at least one file outside .planning/. Strict mode is what makes planning.commit_docs: true safe for a project that versions its planning tree locally but publishes none of it. The alternative posture, commit_docs: false, silently costs parallel executor isolation — a worktree is checked out from a commit, so an untracked or ignored .planning/ is simply absent inside it and the executor has no PLAN.md to read. That claim is now established by an executed fixture rather than inherited. The two path lists are declared once and both projections derived from them, so create_pr_branch and verify can no longer disagree about what the filter promised. verify previously counted every .planning/ path against a documented success criterion of zero while create_pr_branch was specified to preserve five structural files, so a correct run reported itself as failed on every phase that touched STATE.md — which is every phase. It now asserts against the active mode, and names the .planning/ paths default mode deliberately keeps rather than trading a wrong signal for silence. Two verified defects in the same recipe are fixed alongside, because strict mode would have amplified both. `git rm -r --cached` staged a deletion for any .planning/ path the target branch already tracked, so the generated PR removed the base branch's planning files — under strict mode that would have been the entire tree. The same command left the picked file untracked on disk, so a second commit touching that path aborted the cherry-pick with "untracked working tree files would be overwritten" and every remaining commit was silently dropped. Both were reproduced against real git before being fixed. The filter now forces excluded paths back to what the PR branch's HEAD carries, in the index and the working tree; a conflict outside the filter halts instead of being improvised past; a commit left empty by filtering is skipped rather than failing. A clean-working-tree precondition makes the worktree half safe. Closes #2971 * fix(#2971): unwind the checkout on a conflict halt, and test the real recipe Two review findings, both fixed in place. The isolated adversarial pass found that the conflict-outside-the-filter branch exited while leaving the user checked out on the half-built PR branch with cherry-pick state still live — this loop runs in the user's own working directory, so stranding them there is a real cost even though it is not a vulnerability. The branch now aborts the pick, returns to the original branch, removes the partial PR branch, and says so before exiting. The standards pass found the L2 fixtures executed a hand-written mirror of the cherry-pick filter recipe rather than the recipe itself, so a reordering in the workflow would not have been caught — and the order is load-bearing, since restoring a path from HEAD before removing it inverts the filter. The helper now extracts the canonical loop from the shipped workflow and the fixtures execute that verbatim, which also gives the conflict-halt unwind above real coverage. The drift guard additionally pins the two commands' relative order and asserts the workflow carries exactly one canonical loop. Also records the publication gate in the CONTEXT.md glossary next to the commit gate it is distinct from. Refs #2971 * fix(#2971): make the conflict-halt unwind actually unwind, and use the colon slash form The remote matrix caught two defects in the previous commit. The halt path claimed to restore the original branch but did not. `git cherry-pick --abort` does not apply to a single `--no-commit` pick with no sequencer file, and the fallback left the unmerged index in place, which makes `git checkout` refuse — a failure the `2>/dev/null || true` then swallowed, so the user was told they had been restored while still sitting on the half-built PR branch. The unwind now drops sequencer state, hard-resets the disposable PR branch to clear the unmerged index, and only claims a restore when the checkout actually succeeded; when it does not, it says where the user is and gives them the two commands to finish it by hand. Verified against real git: exit 1, the conflict named, HEAD back on the original branch, the partial branch gone, a clean tree and no CHERRY_PICK_HEAD. Two runtime-loaded source artifacts used the retired `/gsd-<cmd>` hyphen form, which names a command no runtime registers. The canonical authoring token for workflows and references is `/gsd:<cmd>`; docs keep the hyphen form, so the documentation added in this branch is unaffected. The comment in src/config.cts moves to the colon form too, since it propagates into the generated lib. Refs #2971 * docs(#2971): backfill PR number into the changeset fragments (#3720) --------- Co-authored-by: sim <sim@local>
This commit is contained in:
@@ -509,6 +509,7 @@ The following combinations of `mode`, `granularity`, `model_profile`, and workfl
|
||||
| Setting | Type | Default | Description |
|
||||
|---------|------|---------|-------------|
|
||||
| `planning.commit_docs` | boolean | `true` | Whether `.planning/` files are committed to git |
|
||||
| `planning.pr_strict` | boolean | `false` | Filter mode for [`/gsd-pr-branch`](COMMANDS.md#gsd-pr-branch). `false` — the generated PR branch keeps structural planning state (`STATE.md`, `ROADMAP.md`, `MILESTONES.md`, `PROJECT.md`, `REQUIREMENTS.md`, `milestones/**`) and drops the transient subdirectories. `true` — every `.planning/` path is dropped, structural files included, and a commit is carried over only when it touches at least one file outside `.planning/`. Applies to the root repository's PR branch only; `planning.sub_repos` companion branches are unaffected |
|
||||
| `planning.search_gitignored` | boolean | `false` | Add `--no-ignore` to broad searches to include `.planning/` |
|
||||
| `planning.sub_repos` | array of strings | `[]` | Paths of nested sub-repos relative to the project root. When set, GSD-aware tooling scopes phase-lookup, path-resolution, and commit operations per sub-repo instead of treating the outer repo as a monorepo |
|
||||
|
||||
@@ -622,6 +623,25 @@ The prompt injection guard hook (`gsd-prompt-guard.js`) is always active and can
|
||||
|
||||
When `planning.commit_docs` is `false` and `.planning/` is listed in `.gitignore`, GSD treats planning artifacts as local-only. `planning.search_gitignored: true` ensures broad searches still include the `.planning/` directory in this configuration. See [Keep planning docs out of a shared repo](how-to/keep-planning-docs-private.md) for the full setup, including untracking files git is already tracking.
|
||||
|
||||
#### Two ways to keep planning private, and what each costs
|
||||
|
||||
"Private planning" is really two different questions — *is it in git at all?* and *does it reach the remote?* — and GSD answers them with two different keys.
|
||||
|
||||
`planning.commit_docs: false` answers the first by keeping `.planning/` out of git entirely. That has a cost most projects discover late: **parallel executor worktrees stop working.** A worktree is checked out from a *commit*, so a `.planning/` directory that is untracked or ignored simply does not exist inside it, and the executor has no `PLAN.md` to read. Local-only planning and parallel execution are mutually exclusive under this setting. Untracked planning also has no git history, so `/gsd-undo` and revert paths have nothing to restore.
|
||||
|
||||
`planning.pr_strict: true` answers the second instead, and leaves the first alone. Planning artifacts are committed normally on your working branch — so worktrees find them, and history exists — while `/gsd-pr-branch` guarantees that none of them reach the branch you publish. The guarantee is enforced by the command rather than by remembering never to push the working branch.
|
||||
|
||||
Pick by which question you are actually asking:
|
||||
|
||||
| You want | Setting | What you give up |
|
||||
|---|---|---|
|
||||
| Planning never enters git | `planning.commit_docs: false` | Parallel executor worktrees; planning git history |
|
||||
| Planning is versioned locally but never published | `planning.commit_docs: true` + `planning.pr_strict: true` | Nothing — but the working branch itself must not be pushed; publish the generated `-pr` branch |
|
||||
|
||||
The two are independent keys and can be set together, but `pr_strict` is inert when `commit_docs` is `false`: with nothing committed, there is nothing for the PR-branch filter to remove.
|
||||
|
||||
See [Publish PRs without planning artifacts](how-to/publish-prs-without-planning-artifacts.md) for the setup.
|
||||
|
||||
### `commit_docs` Pre-Commit Guard (opt-in)
|
||||
|
||||
`planning.commit_docs: false` only stops GSD's own `gsd-tools commit`/`gsd-tools state`
|
||||
|
||||
Reference in New Issue
Block a user