diff --git a/.changeset/2494-review-claude-gemini-empty-guard.md b/.changeset/2494-review-claude-gemini-empty-guard.md
new file mode 100644
index 000000000..04e8a975f
--- /dev/null
+++ b/.changeset/2494-review-claude-gemini-empty-guard.md
@@ -0,0 +1,5 @@
+---
+type: Fixed
+pr: 2592
+---
+**The Gemini and Claude reviewer legs now fail loudly instead of silently dropping out of the cross-AI review** — both blocks capture stderr to a `.err` sidecar instead of discarding it to `/dev/null`, and write a diagnostic stub with the captured error when the lane produces no output. Previously they were the only two of the ten prompt-fed reviewer legs with neither guard, so any failure that wrote no stdout (CLI missing, unauthenticated, rate-limited, crashed) left a zero-byte review file that `write_reviews` rendered as a reviewer that had run cleanly with nothing to report — quietly degrading an N-reviewer consensus to N-1 while `present_results` reported success. The guard matches the shape the Codex and Cursor legs already use. (#2494)
diff --git a/gsd-core/workflows/review.md b/gsd-core/workflows/review.md
index 82310d263..e1e67e223 100644
--- a/gsd-core/workflows/review.md
+++ b/gsd-core/workflows/review.md
@@ -277,19 +277,39 @@ For each selected CLI, invoke in sequence (not parallel — avoid rate limits):
 
 **Gemini:**
 ```bash
+# #2494: capture stderr to a .err sidecar (not /dev/null) and stub an empty
+# result, mirroring the Codex and Cursor blocks. Without the guard a failed
+# lane — CLI missing, unauthenticated, rate-limited, crashed, or any exit that
+# writes no stdout — leaves a zero-byte file that write_reviews renders as a
+# reviewer that ran cleanly with nothing to report, silently dropping a lane
+# from the cross-AI consensus while present_results reports success.
+# Scope limit: the guard only runs if this block completes. A host Bash-tool
+# timeout that kills the whole block skips it, the same hard bound the
+# OpenCode block documents below — per the timeout guidance above, treat an
+# empty result on a slow lane as a dropped lane rather than a crash.
 if [ -n "$GEMINI_MODEL" ] && [ "$GEMINI_MODEL" != "null" ]; then
-  cat {run_dir}/gsd-review-prompt.md | gemini -m "$GEMINI_MODEL" -p - 2>/dev/null > {run_dir}/gsd-review-gemini.md
+  cat {run_dir}/gsd-review-prompt.md | gemini -m "$GEMINI_MODEL" -p - 2>{run_dir}/gsd-review-gemini.err > {run_dir}/gsd-review-gemini.md
 else
-  cat {run_dir}/gsd-review-prompt.md | gemini -p - 2>/dev/null > {run_dir}/gsd-review-gemini.md
+  cat {run_dir}/gsd-review-prompt.md | gemini -p - 2>{run_dir}/gsd-review-gemini.err > {run_dir}/gsd-review-gemini.md
+fi
+if [ ! -s {run_dir}/gsd-review-gemini.md ]; then
+  echo "Gemini review failed or returned empty output. stderr:" > {run_dir}/gsd-review-gemini.md
+  cat {run_dir}/gsd-review-gemini.err >> {run_dir}/gsd-review-gemini.md
 fi
 ```
 
 **Claude (separate session):**
 ```bash
+# #2494: same guard as the Gemini block above — stderr to a .err sidecar
+# instead of /dev/null, and a diagnostic stub when the lane produces nothing.
 if [ -n "$CLAUDE_MODEL" ] && [ "$CLAUDE_MODEL" != "null" ]; then
-  cat {run_dir}/gsd-review-prompt.md | claude --model "$CLAUDE_MODEL" $CLAUDE_EFFORT_ARGS -p - 2>/dev/null > {run_dir}/gsd-review-claude.md
+  cat {run_dir}/gsd-review-prompt.md | claude --model "$CLAUDE_MODEL" $CLAUDE_EFFORT_ARGS -p - 2>{run_dir}/gsd-review-claude.err > {run_dir}/gsd-review-claude.md
 else
-  cat {run_dir}/gsd-review-prompt.md | claude $CLAUDE_EFFORT_ARGS -p - 2>/dev/null > {run_dir}/gsd-review-claude.md
+  cat {run_dir}/gsd-review-prompt.md | claude $CLAUDE_EFFORT_ARGS -p - 2>{run_dir}/gsd-review-claude.err > {run_dir}/gsd-review-claude.md
+fi
+if [ ! -s {run_dir}/gsd-review-claude.md ]; then
+  echo "Claude review failed or returned empty output. stderr:" > {run_dir}/gsd-review-claude.md
+  cat {run_dir}/gsd-review-claude.err >> {run_dir}/gsd-review-claude.md
 fi
 ```
 
diff --git a/tests/fix-2494-review-claude-gemini-empty-guard.test.cjs b/tests/fix-2494-review-claude-gemini-empty-guard.test.cjs
new file mode 100644
index 000000000..8d5ec8d04
--- /dev/null
+++ b/tests/fix-2494-review-claude-gemini-empty-guard.test.cjs
@@ -0,0 +1,204 @@
+// allow-test-rule: source-text-is-the-product (see #2494)
+// The Gemini and Claude reviewer dispatch blocks in gsd-core/workflows/review.md
+// ARE the runtime contract — the workflow's text is what the reviewing agent
+// executes. This suite extracts those two shell blocks verbatim from the
+// workflow and runs them under a real bash against a failing CLI stub, so the
+// shipped guard is what gets exercised rather than a reimplementation of it.
+// The assertions on the produced review file are assertions on that guard's
+// documented output contract (the stub line the consensus step must be able to
+// tell apart from a clean empty review), not incidental string matching.
+
+/**
+ * Regression tests for #2494 — the claude and gemini reviewer legs discarded
+ * stderr with no empty-output guard.
+ *
+ * Before the fix both blocks were `... 2>/dev/null > {run_dir}/gsd-review-<leg>.md`
+ * with nothing after: a non-zero exit that wrote no stdout (CLI missing,
+ * unauthenticated, rate-limited, timeout-killed, crashed) left a ZERO-BYTE
+ * review file with the only diagnostic evidence — stderr — already discarded.
+ * The write_reviews step then substituted that empty file into a
+ * `## <Reviewer> Review` section indistinguishable from "ran cleanly, nothing
+ * to report", silently degrading the advertised N-reviewer consensus to N-1.
+ *
+ * These tests fail against pre-fix review.md: the produced file is zero-byte,
+ * so both the non-empty and the diagnosable-message assertions trip.
+ */
+
+'use strict';
+
+const { describe, test, before, after } = require('node:test');
+const assert = require('node:assert/strict');
+const { spawnSync } = require('node:child_process');
+const fs = require('node:fs');
+const path = require('node:path');
+const { createTempDir, cleanup } = require('./helpers.cjs');
+
+const ROOT = path.join(__dirname, '..');
+const REVIEW_PATH = path.join(ROOT, 'gsd-core', 'workflows', 'review.md');
+
+// Normalize CRLF: on a Windows git-autocrlf checkout every line carries a
+// trailing \r, which would leave the extracted block's shebang/redirect tokens
+// mangled and defeat the fence regexes below.
+const WORKFLOW = fs.readFileSync(REVIEW_PATH, 'utf-8').replace(/\r\n/g, '\n');
+
+// This suite executes the extracted blocks with a real bash and a POSIX CLI
+// stub on PATH. Gate to non-Windows, mirroring the opencode reconstruction
+// suite's win32 skip — the guard logic is platform-independent and is asserted
+// in full on every macOS/Linux CI leg.
+const skipReason = process.platform === 'win32'
+  ? 'extracted block is POSIX shell; guard logic is platform-independent and asserted on macOS/Linux'
+  : false;
+
+/**
+ * Extract a reviewer dispatch block verbatim from the workflow. If review.md
+ * changes the block's shape these throw and the test fails loudly — intended
+ * coupling, the same contract the opencode suite pins for its jq programs.
+ */
+function extractBlock(headingRe, label) {
+  const re = new RegExp(`${headingRe}\\n\`\`\`bash\\n([\\s\\S]*?)\\n\`\`\``);
+  const m = WORKFLOW.match(re);
+  assert.ok(m, `review.md must define the ${label} reviewer dispatch as a bash block (#2494)`);
+  return m[1];
+}
+
+const GEMINI_BLOCK = extractBlock('\\*\\*Gemini:\\*\\*', 'Gemini');
+const CLAUDE_BLOCK = extractBlock('\\*\\*Claude \\(separate session\\):\\*\\*', 'Claude');
+
+const STUB_STDERR = 'gsd-2494-stub: command not found / not authenticated';
+
+let sandbox;
+
+before(() => {
+  sandbox = createTempDir('gsd-2494-');
+});
+
+after(() => {
+  cleanup(sandbox);
+});
+
+/**
+ * Run one extracted block with `{run_dir}` pointed at a fresh run directory and
+ * `stubBody` installed on PATH under the reviewer's binary name.
+ *
+ * Single exec site for the whole suite so the Windows guard lives in one place:
+ * Git Bash (msys2) ignores Node's chmod exec bit for PATH-executed
+ * extension-less scripts (DEFECT.WINDOWS-TEST-PORTABILITY), and every suite
+ * below is skipped on win32 — this early return keeps the exec unreachable
+ * there rather than relying on the skip alone.
+ */
+function runBlockWithStub({ binName, block, stubBody, env = {} }) {
+  if (process.platform === 'win32') return null;
+
+  const caseDir = fs.mkdtempSync(path.join(sandbox, 'run-'));
+  const runDir = path.join(caseDir, 'run');
+  const binDir = path.join(caseDir, 'bin');
+  fs.mkdirSync(runDir);
+  fs.mkdirSync(binDir);
+
+  const stub = path.join(binDir, binName);
+  fs.writeFileSync(stub, stubBody);
+  fs.chmodSync(stub, 0o755);
+
+  fs.writeFileSync(path.join(runDir, 'gsd-review-prompt.md'), '# review prompt\n');
+
+  const script = block.split('{run_dir}').join(runDir);
+  const result = spawnSync('bash', ['-c', script], {
+    encoding: 'utf8',
+    timeout: 30000,
+    killSignal: 'SIGKILL',
+    env: { ...process.env, PATH: `${binDir}${path.delimiter}${process.env.PATH}`, ...env },
+  });
+
+  const reviewPath = path.join(runDir, `gsd-review-${binName}.md`);
+  return {
+    result,
+    reviewPath,
+    errPath: path.join(runDir, `gsd-review-${binName}.err`),
+    review: fs.existsSync(reviewPath) ? fs.readFileSync(reviewPath, 'utf-8') : null,
+  };
+}
+
+/**
+ * The issue's own repro harness: a CLI that writes STUB_STDERR to stderr,
+ * nothing to stdout, and exits non-zero.
+ */
+function runLeg({ binName, block, env = {} }) {
+  return runBlockWithStub({
+    binName,
+    block,
+    stubBody: `#!/bin/sh\necho "${STUB_STDERR}" >&2\nexit 127\n`,
+    env,
+  });
+}
+
+/**
+ * The guard's contract: the review file exists, is NOT empty, names the leg as
+ * failed-or-empty, and carries the captured stderr. The last assertion is what
+ * separates this fix from a bare `[ ! -s ]` stub — the evidence has to survive.
+ */
+function assertDiagnosable({ review, reviewPath, errPath }, legLabel) {
+  assert.ok(review !== null, `${legLabel}: review file must exist after a failed lane (#2494)`);
+  assert.notStrictEqual(review.trim(), '', `${legLabel}: review file must not be empty after a failed lane (#2494)`);
+  assert.match(
+    review,
+    new RegExp(`${legLabel} review failed or returned empty output`, 'i'),
+    `${legLabel}: review file must carry a diagnosable failure line, distinguishable at consensus synthesis from "ran cleanly, nothing to report" (#2494)`,
+  );
+  assert.ok(
+    review.includes(STUB_STDERR),
+    `${legLabel}: captured stderr must be appended to the review file, not discarded to /dev/null (#2494)`,
+  );
+  assert.ok(fs.existsSync(errPath), `${legLabel}: stderr must be captured to a .err sidecar (#2494)`);
+  assert.ok(reviewPath.endsWith('.md'), `${legLabel}: review output path unchanged`);
+}
+
+describe('#2494 — gemini reviewer leg fails loudly', { skip: skipReason }, () => {
+  test('a failing gemini CLI produces a diagnosable stub, not an empty file (model configured)', () => {
+    const out = runLeg({ binName: 'gemini', block: GEMINI_BLOCK, env: { GEMINI_MODEL: 'gemini-test-model' } });
+    assertDiagnosable(out, 'Gemini');
+  });
+
+  test('a failing gemini CLI produces a diagnosable stub, not an empty file (no model configured)', () => {
+    const out = runLeg({ binName: 'gemini', block: GEMINI_BLOCK, env: { GEMINI_MODEL: '' } });
+    assertDiagnosable(out, 'Gemini');
+  });
+});
+
+describe('#2494 — claude reviewer leg fails loudly', { skip: skipReason }, () => {
+  test('a failing claude CLI produces a diagnosable stub, not an empty file (model configured)', () => {
+    const out = runLeg({
+      binName: 'claude',
+      block: CLAUDE_BLOCK,
+      env: { CLAUDE_MODEL: 'claude-test-model', CLAUDE_EFFORT_ARGS: '' },
+    });
+    assertDiagnosable(out, 'Claude');
+  });
+
+  test('a failing claude CLI produces a diagnosable stub, not an empty file (no model configured)', () => {
+    const out = runLeg({
+      binName: 'claude',
+      block: CLAUDE_BLOCK,
+      env: { CLAUDE_MODEL: '', CLAUDE_EFFORT_ARGS: '' },
+    });
+    assertDiagnosable(out, 'Claude');
+  });
+});
+
+describe('#2494 — the guard does not swallow a successful review', { skip: skipReason }, () => {
+  test('gemini stdout is preserved verbatim when the CLI succeeds', () => {
+    const out = runBlockWithStub({
+      binName: 'gemini',
+      block: GEMINI_BLOCK,
+      stubBody: '#!/bin/sh\necho "## Real Review"\necho "Looks good."\nexit 0\n',
+      env: { GEMINI_MODEL: '' },
+    });
+
+    const { review } = out;
+    assert.ok(review !== null, 'a successful review must produce a review file (#2494)');
+    assert.ok(review.includes('Looks good.'), 'a successful review must pass through untouched (#2494)');
+    assert.ok(
+      !/failed or returned empty output/i.test(review),
+      'the stub must not fire on a non-empty review (#2494)',
+    );
+  });
+});
diff --git a/tests/fixtures/golden-install-parity/antigravity.json b/tests/fixtures/golden-install-parity/antigravity.json
index cc79ca3a1..c72c3317a 100644
--- a/tests/fixtures/golden-install-parity/antigravity.json
+++ b/tests/fixtures/golden-install-parity/antigravity.json
@@ -299,7 +299,7 @@
   "gsd-core/workflows/remove-phase.md": "23b9eb0858a2535e",
   "gsd-core/workflows/remove-workspace.md": "1058d1d3160eb120",
   "gsd-core/workflows/resume-project.md": "98e2cf8908e73a52",
-  "gsd-core/workflows/review.md": "cb4ed7b2b77bba35",
+  "gsd-core/workflows/review.md": "73ea346aebf61b77",
   "gsd-core/workflows/scan.md": "46c5a73f6f682023",
   "gsd-core/workflows/secure-phase.md": "9564c529052d1d36",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/augment.json b/tests/fixtures/golden-install-parity/augment.json
index 12558d2ba..b258b4271 100644
--- a/tests/fixtures/golden-install-parity/augment.json
+++ b/tests/fixtures/golden-install-parity/augment.json
@@ -370,7 +370,7 @@
   "gsd-core/workflows/remove-phase.md": "df9a45f0b1880999",
   "gsd-core/workflows/remove-workspace.md": "f67860c795fb4bfe",
   "gsd-core/workflows/resume-project.md": "f28da1200e4545f4",
-  "gsd-core/workflows/review.md": "d4f26b05b3eff7f6",
+  "gsd-core/workflows/review.md": "ed04746925ea035f",
   "gsd-core/workflows/scan.md": "e1c12d542e61720d",
   "gsd-core/workflows/secure-phase.md": "fda2361739e511ee",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/claude-local.json b/tests/fixtures/golden-install-parity/claude-local.json
index b8f84a72a..706030e91 100644
--- a/tests/fixtures/golden-install-parity/claude-local.json
+++ b/tests/fixtures/golden-install-parity/claude-local.json
@@ -369,7 +369,7 @@
   "gsd-core/workflows/remove-phase.md": "8effc8742d58a11a",
   "gsd-core/workflows/remove-workspace.md": "64b73daff58b9aec",
   "gsd-core/workflows/resume-project.md": "af9761bcec0f6fe9",
-  "gsd-core/workflows/review.md": "9eb81c7c61cfe50e",
+  "gsd-core/workflows/review.md": "7838e12644bf808a",
   "gsd-core/workflows/scan.md": "686e787d3704db90",
   "gsd-core/workflows/secure-phase.md": "a7272ff8163a61ac",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/claude.json b/tests/fixtures/golden-install-parity/claude.json
index e32ceb066..9ac94b580 100644
--- a/tests/fixtures/golden-install-parity/claude.json
+++ b/tests/fixtures/golden-install-parity/claude.json
@@ -298,7 +298,7 @@
   "gsd-core/workflows/remove-phase.md": "ada8a0546c686483",
   "gsd-core/workflows/remove-workspace.md": "015cde237c75be39",
   "gsd-core/workflows/resume-project.md": "7f8dc986f0f35d96",
-  "gsd-core/workflows/review.md": "bba666ebc5e13130",
+  "gsd-core/workflows/review.md": "fa72c8f343102dba",
   "gsd-core/workflows/scan.md": "a71e3009998cfc57",
   "gsd-core/workflows/secure-phase.md": "ba807b4862d7f3c9",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/cline.json b/tests/fixtures/golden-install-parity/cline.json
index 197e69e19..a3809388b 100644
--- a/tests/fixtures/golden-install-parity/cline.json
+++ b/tests/fixtures/golden-install-parity/cline.json
@@ -302,7 +302,7 @@
   "gsd-core/workflows/remove-phase.md": "e336350f8113a328",
   "gsd-core/workflows/remove-workspace.md": "79d3669cc9eb0b10",
   "gsd-core/workflows/resume-project.md": "e23981178fa37b3d",
-  "gsd-core/workflows/review.md": "b1c5ebc05398ca45",
+  "gsd-core/workflows/review.md": "2a95ced731e6d14c",
   "gsd-core/workflows/scan.md": "f0bd2f64f5530598",
   "gsd-core/workflows/secure-phase.md": "1a2e389991fc6263",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/codebuddy.json b/tests/fixtures/golden-install-parity/codebuddy.json
index 9741bc146..58251a23b 100644
--- a/tests/fixtures/golden-install-parity/codebuddy.json
+++ b/tests/fixtures/golden-install-parity/codebuddy.json
@@ -370,7 +370,7 @@
   "gsd-core/workflows/remove-phase.md": "df9a45f0b1880999",
   "gsd-core/workflows/remove-workspace.md": "f67860c795fb4bfe",
   "gsd-core/workflows/resume-project.md": "f28da1200e4545f4",
-  "gsd-core/workflows/review.md": "d4f26b05b3eff7f6",
+  "gsd-core/workflows/review.md": "ed04746925ea035f",
   "gsd-core/workflows/scan.md": "e1c12d542e61720d",
   "gsd-core/workflows/secure-phase.md": "fda2361739e511ee",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/codex.json b/tests/fixtures/golden-install-parity/codex.json
index 820551db9..3b510e23a 100644
--- a/tests/fixtures/golden-install-parity/codex.json
+++ b/tests/fixtures/golden-install-parity/codex.json
@@ -405,7 +405,7 @@
   "gsd-core/workflows/remove-phase.md": "9ee0fddd11a0d9d4",
   "gsd-core/workflows/remove-workspace.md": "d0160c5d05bcb2bb",
   "gsd-core/workflows/resume-project.md": "9965f87eb278f7f8",
-  "gsd-core/workflows/review.md": "6c74f7151f41df8b",
+  "gsd-core/workflows/review.md": "9987e9fd8f7e5adb",
   "gsd-core/workflows/scan.md": "dcd6aac25ef39251",
   "gsd-core/workflows/secure-phase.md": "3ba89719288dd3f3",
   "gsd-core/workflows/session-report.md": "dd8fa011c9394075",
diff --git a/tests/fixtures/golden-install-parity/copilot.json b/tests/fixtures/golden-install-parity/copilot.json
index c2fbfbac6..6c925db52 100644
--- a/tests/fixtures/golden-install-parity/copilot.json
+++ b/tests/fixtures/golden-install-parity/copilot.json
@@ -300,7 +300,7 @@
   "gsd-core/workflows/remove-phase.md": "e262654e319d1bc4",
   "gsd-core/workflows/remove-workspace.md": "e7e5b5b1e0cc9d81",
   "gsd-core/workflows/resume-project.md": "40db7f350f5866d8",
-  "gsd-core/workflows/review.md": "31d6ec81b8c8dddc",
+  "gsd-core/workflows/review.md": "6aad3c5254932206",
   "gsd-core/workflows/scan.md": "76aad4e70281c364",
   "gsd-core/workflows/secure-phase.md": "d60aa4053154e52f",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/cursor.json b/tests/fixtures/golden-install-parity/cursor.json
index c44054a7f..97da6ef48 100644
--- a/tests/fixtures/golden-install-parity/cursor.json
+++ b/tests/fixtures/golden-install-parity/cursor.json
@@ -370,7 +370,7 @@
   "gsd-core/workflows/remove-phase.md": "ada8a0546c686483",
   "gsd-core/workflows/remove-workspace.md": "0572a83d71650937",
   "gsd-core/workflows/resume-project.md": "7f8dc986f0f35d96",
-  "gsd-core/workflows/review.md": "28a82741e3e8616d",
+  "gsd-core/workflows/review.md": "f5972bbe92dc5f0c",
   "gsd-core/workflows/scan.md": "a71e3009998cfc57",
   "gsd-core/workflows/secure-phase.md": "b008216148d2afac",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/hermes.json b/tests/fixtures/golden-install-parity/hermes.json
index 42451b23f..264299f88 100644
--- a/tests/fixtures/golden-install-parity/hermes.json
+++ b/tests/fixtures/golden-install-parity/hermes.json
@@ -299,7 +299,7 @@
   "gsd-core/workflows/remove-phase.md": "fce799aae3ab2715",
   "gsd-core/workflows/remove-workspace.md": "42029a7559f1d8fb",
   "gsd-core/workflows/resume-project.md": "a0443839f1f83c2d",
-  "gsd-core/workflows/review.md": "9a7fd3c1c2bd617d",
+  "gsd-core/workflows/review.md": "b7aa706def0b93d6",
   "gsd-core/workflows/scan.md": "5c2370d6a8118b6c",
   "gsd-core/workflows/secure-phase.md": "c087131f1dd12901",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/kilo.json b/tests/fixtures/golden-install-parity/kilo.json
index 4c6d21cb5..e32fee630 100644
--- a/tests/fixtures/golden-install-parity/kilo.json
+++ b/tests/fixtures/golden-install-parity/kilo.json
@@ -370,7 +370,7 @@
   "gsd-core/workflows/remove-phase.md": "ada8a0546c686483",
   "gsd-core/workflows/remove-workspace.md": "f5dc82bb63e2efa4",
   "gsd-core/workflows/resume-project.md": "7f8dc986f0f35d96",
-  "gsd-core/workflows/review.md": "9299d96d44252a8a",
+  "gsd-core/workflows/review.md": "c5c59f2bb70396ab",
   "gsd-core/workflows/scan.md": "c039d3e40d26b606",
   "gsd-core/workflows/secure-phase.md": "5a8fbf603d218100",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/kimi-code.json b/tests/fixtures/golden-install-parity/kimi-code.json
index 57e89a25d..446f5e560 100644
--- a/tests/fixtures/golden-install-parity/kimi-code.json
+++ b/tests/fixtures/golden-install-parity/kimi-code.json
@@ -327,7 +327,7 @@
   "gsd-core/workflows/remove-phase.md": "df9a45f0b1880999",
   "gsd-core/workflows/remove-workspace.md": "f67860c795fb4bfe",
   "gsd-core/workflows/resume-project.md": "f28da1200e4545f4",
-  "gsd-core/workflows/review.md": "d4f26b05b3eff7f6",
+  "gsd-core/workflows/review.md": "ed04746925ea035f",
   "gsd-core/workflows/scan.md": "e1c12d542e61720d",
   "gsd-core/workflows/secure-phase.md": "fda2361739e511ee",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/kimi.json b/tests/fixtures/golden-install-parity/kimi.json
index 1f304bc93..bcd39c42b 100644
--- a/tests/fixtures/golden-install-parity/kimi.json
+++ b/tests/fixtures/golden-install-parity/kimi.json
@@ -363,7 +363,7 @@
   "gsd-core/workflows/remove-phase.md": "df9a45f0b1880999",
   "gsd-core/workflows/remove-workspace.md": "f67860c795fb4bfe",
   "gsd-core/workflows/resume-project.md": "f28da1200e4545f4",
-  "gsd-core/workflows/review.md": "d4f26b05b3eff7f6",
+  "gsd-core/workflows/review.md": "ed04746925ea035f",
   "gsd-core/workflows/scan.md": "e1c12d542e61720d",
   "gsd-core/workflows/secure-phase.md": "fda2361739e511ee",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/opencode.json b/tests/fixtures/golden-install-parity/opencode.json
index ef6597e46..8680b26fb 100644
--- a/tests/fixtures/golden-install-parity/opencode.json
+++ b/tests/fixtures/golden-install-parity/opencode.json
@@ -370,7 +370,7 @@
   "gsd-core/workflows/remove-phase.md": "dea4661e8f89596f",
   "gsd-core/workflows/remove-workspace.md": "21a8581add5f31ae",
   "gsd-core/workflows/resume-project.md": "ad9f06a10bab8cc0",
-  "gsd-core/workflows/review.md": "a2c5d053c8ef6e27",
+  "gsd-core/workflows/review.md": "486bc0f9ab4c24f4",
   "gsd-core/workflows/scan.md": "cbfb79df855e5e61",
   "gsd-core/workflows/secure-phase.md": "ef09f40dfd4d2424",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/pi.json b/tests/fixtures/golden-install-parity/pi.json
index b7e1377bd..617ec1dab 100644
--- a/tests/fixtures/golden-install-parity/pi.json
+++ b/tests/fixtures/golden-install-parity/pi.json
@@ -266,7 +266,7 @@
   "gsd-core/workflows/remove-phase.md": "df9a45f0b1880999",
   "gsd-core/workflows/remove-workspace.md": "f67860c795fb4bfe",
   "gsd-core/workflows/resume-project.md": "f28da1200e4545f4",
-  "gsd-core/workflows/review.md": "d4f26b05b3eff7f6",
+  "gsd-core/workflows/review.md": "ed04746925ea035f",
   "gsd-core/workflows/scan.md": "e1c12d542e61720d",
   "gsd-core/workflows/secure-phase.md": "fda2361739e511ee",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/qwen.json b/tests/fixtures/golden-install-parity/qwen.json
index b0546f9b6..53bb936da 100644
--- a/tests/fixtures/golden-install-parity/qwen.json
+++ b/tests/fixtures/golden-install-parity/qwen.json
@@ -299,7 +299,7 @@
   "gsd-core/workflows/remove-phase.md": "e8ae4fbbfac700f0",
   "gsd-core/workflows/remove-workspace.md": "ae520235f4d1f4a5",
   "gsd-core/workflows/resume-project.md": "7f20769f302e5427",
-  "gsd-core/workflows/review.md": "5b59389282a276fc",
+  "gsd-core/workflows/review.md": "3db704f47d7a5bde",
   "gsd-core/workflows/scan.md": "b7efd0d381a3b8a5",
   "gsd-core/workflows/secure-phase.md": "f7bfa7175102af31",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/trae.json b/tests/fixtures/golden-install-parity/trae.json
index 07a757748..604f8bfa3 100644
--- a/tests/fixtures/golden-install-parity/trae.json
+++ b/tests/fixtures/golden-install-parity/trae.json
@@ -299,7 +299,7 @@
   "gsd-core/workflows/remove-phase.md": "a46c2fe853bf4e86",
   "gsd-core/workflows/remove-workspace.md": "8ddc5f04f7c48d6c",
   "gsd-core/workflows/resume-project.md": "f242e4c8aba18ea2",
-  "gsd-core/workflows/review.md": "2e10545b307c867c",
+  "gsd-core/workflows/review.md": "b02dae5c743b1797",
   "gsd-core/workflows/scan.md": "3b14bcb51d3a4de8",
   "gsd-core/workflows/secure-phase.md": "267393d5b02b5334",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/windsurf.json b/tests/fixtures/golden-install-parity/windsurf.json
index 5b487d32e..714d36815 100644
--- a/tests/fixtures/golden-install-parity/windsurf.json
+++ b/tests/fixtures/golden-install-parity/windsurf.json
@@ -299,7 +299,7 @@
   "gsd-core/workflows/remove-phase.md": "e7a6af429b36e77b",
   "gsd-core/workflows/remove-workspace.md": "30ca05fe4a3efc25",
   "gsd-core/workflows/resume-project.md": "82cfe1b8cb17c085",
-  "gsd-core/workflows/review.md": "ac0c02f11e2ae1dc",
+  "gsd-core/workflows/review.md": "f3fdf577dbc08f5f",
   "gsd-core/workflows/scan.md": "4a910da5e34f2685",
   "gsd-core/workflows/secure-phase.md": "d5d811bc468ce7f2",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/fixtures/golden-install-parity/zcode.json b/tests/fixtures/golden-install-parity/zcode.json
index b1433f2db..b2202efc1 100644
--- a/tests/fixtures/golden-install-parity/zcode.json
+++ b/tests/fixtures/golden-install-parity/zcode.json
@@ -370,7 +370,7 @@
   "gsd-core/workflows/remove-phase.md": "df9a45f0b1880999",
   "gsd-core/workflows/remove-workspace.md": "f67860c795fb4bfe",
   "gsd-core/workflows/resume-project.md": "f28da1200e4545f4",
-  "gsd-core/workflows/review.md": "d4f26b05b3eff7f6",
+  "gsd-core/workflows/review.md": "ed04746925ea035f",
   "gsd-core/workflows/scan.md": "e1c12d542e61720d",
   "gsd-core/workflows/secure-phase.md": "fda2361739e511ee",
   "gsd-core/workflows/session-report.md": "2e5b1205324ddefa",
diff --git a/tests/workflow-size-baseline.json b/tests/workflow-size-baseline.json
index f72cfe917..ff7efc135 100644
--- a/tests/workflow-size-baseline.json
+++ b/tests/workflow-size-baseline.json
@@ -64,7 +64,7 @@
   "remove-phase.md": 8513,
   "remove-workspace.md": 7916,
   "resume-project.md": 17270,
-  "review.md": 51210,
+  "review.md": 52646,
   "scan.md": 8314,
   "secure-phase.md": 14627,
   "session-report.md": 4044,