3 Commits

Author	SHA1	Message	Date
Tom Boucher	2ea5efc151	enhance(#3911): hooks declare their crash policy (#3960) ... * enhance(#3911): give hooks an exit seam that needs no build ADR-3889 Phase 7 foundation. The 19 shipped enforcement hooks hold 91 of the epic's 128 terminators and cannot reach `terminateNow` today. The obvious route — requiring `gsd-core/bin/lib/cli-exit.cjs`, as gsd-agent-isolation-guard.js already does for two other modules — is rejected. That precedent carries its own warning (#3582): those files are tsc output, gitignored and absent on a raw plugin-marketplace or git-clone install, so the hook must first call ensureRuntimeBuild() to self-heal. Making the module a hook needs IN ORDER TO TERMINATE depend on a build inverts the dependency, and its failure mode is precisely the fail-open this phase exists to remove: a guard that cannot terminate cannot deny. `lint-hooks-runtime-build-seam` already encodes that concern, and Design B would have had to add an ensureRuntimeBuild() call to all 19 hooks to satisfy it. So `hooks/lib/` becomes a third emit location for cli-exit and a fifth for the registry, preserving the invariant `src/cli-exit.cts`'s own header states: it imports nothing but node:fs and its sibling registry, and the generator dual-emits that sibling alongside each copy so a relative require resolves next to whichever copy loaded it. Shipping needed no change — build-hooks.js already declares HOOKS_SUBDIRS_TO_COPY = ['lib']. Proven, not asserted: the two files are copied into an otherwise-empty tmpdir and a child process requires them and terminates — PASS exits 0, HOOK_DENY exits 2 with the payload on both stdout and stderr. That test fails the moment the hooks copy gains a require reaching outside hooks/lib/. Also fixed inline: the registry's fifth target let any `--write` test overwrite the real committed hooks/lib/exit-code-registry.js, because the test helper derived only three of the other output paths. It now redirects all five, and a regression test asserts every committed artifact is byte-identical after a redirected write. Install-tree goldens pick up the two new shipped paths across 11 runtimes — insertions only, no removals. lint:ci was green while they were stale, so this was found by regenerating rather than by a gate. Verification runs on the remote runner. Refs #3911 * enhance(#3911): declare a crash policy, and migrate the write guard Adds `hooks/lib/hook-exit.js` — the hook-facing vocabulary over `terminateNow`, hand-written because the cli-exit copy beside it is generated: allow(payload) exit 0 deny(payload, stderr?) exit 2 crash(onCrash, payload) whichever the hook DECLARED `crash()` takes the policy as a required argument with no default, which is the whole mechanism: fail-open by accident stops being expressible. A hook must name ALLOW or DENY at the call site, and an unrecognized value terminates INTERNAL rather than guessing. Fail-open stays legal; fail-open by omission does not. `gsd-write-guard.js` is the first hook migrated, all 12 sites, and it exposed a gap in the seam. `terminateNow`'s doc comment justified its fd-2 write by citing this hook's `emitBlock` — but modeled it as sending the same bytes to both streams, when `emitBlock` actually sends full JSON to stdout and only the bare `reason` string to stderr, because Kimi's hook bus feeds stderr verbatim back to the model. Migrating as written would have turned a readable sentence into a JSON blob for Kimi-backed agents. #3911 requires both "all 19 hooks terminate through terminateNow" and "no hook's effective default changes". Those are jointly satisfiable only by teaching the seam to carry a distinct stderr payload, so `terminateNow` gains an optional third argument: omitted, behavior is byte-for-byte what it was; a string is written raw, which is exactly the Kimi case. The doc comment's inaccurate claim about emitBlock is corrected in place. Proven rather than asserted: the pre-migration file is reconstructed from HEAD and driven with the same catastrophic-shrink payload as the migrated one — exit code, stdout and stderr all byte-identical. Verification runs on the remote runner. Refs #3911 * enhance(#3911): all 19 hooks terminate through the seam Migrates the remaining 18 enforcement hooks onto allow/deny/crash. An AST walk now reports zero `process.exit(` call sites across every `hooks/*.js` — down from the 91 the census measured. Each hook with an outer catch declares its policy once, at module top, with the reason that policy is right for that specific guard: a read guard that cannot scan must not block the read; a statusline that renders every prompt must degrade rather than crash; an injection scanner must not retroactively block a result already returned. Those sentences are the deliverable — they are what turns fail-open-by-accident into fail-open-on-purpose. No hook's effective default changed. Wiring exposed two defects, both fixed here rather than noted. A SECOND stdout/stderr-splitting site turned up in `gsd-workflow-guard.js`'s `emitForceAddBlock`, matching the pattern already known from the write guard — full JSON to stdout, bare reason to stderr for the Kimi bus. It uses the `stderrPayload` argument added in the previous commit, which is now carrying its second real caller rather than one special case. More seriously, `terminateNow` emitted both streams inside ONE try, so a payload that failed to serialize aborted before the stderr write ever ran. The two windsurf guards write nothing to stdout on a block and only a reason string to stderr, so `deny(undefined, reason)` exited 2 with EMPTY stderr — a deny that silently loses its reason, which is the exact "fails with success" class this epic exists to close. The streams are now emitted independently, each with its own guard, and `undefined` means "nothing to write for this stream" rather than an error. Regression tests inject a throwing write on one fd and assert the other still receives its payload; they fail against the single-try version. Byte-identity was proven per hook, not assumed: each pre-change file is reconstructed from HEAD and driven side by side with the migrated one across its normal path, its deny path, malformed stdin and empty stdin — exit code, stdout and stderr compared. Verification runs on the remote runner. Refs #3911 * enhance(#3911): harden the three shell hooks, and pin every hook's policy `gsd-phase-boundary.sh`, `gsd-session-state.sh` and `gsd-validate-commit.sh` gain `set -euo pipefail`. The expected hazard did not materialize, and that is worth recording: every intentionally-non-zero command in all three is already the condition of an `if`/`elif`, which `set -e` never fires on, and none of them reads a possibly-unset variable or pipes through a grep that may legitimately match nothing. No `|| true` guards were needed. Each hook was still checked command-by-command before the flags went in rather than after. Twenty-one before/after cases across the three hooks — disabled and enabled, planning and non-planning, missing STATE.md, malformed JSON, the Kimi payload shape, quoted and unquoted `-m`, valid and over-long Conventional Commits — all match on exit code, stdout and stderr. The hardening is shown to actually fire, not merely added: with a stubbed `node` that fails at the JSON-emit step, phase-boundary and session-state go from silently exiting 0 with empty stdout to failing visibly with the error surfaced. No such case could be constructed for `gsd-validate-commit.sh`, whose every statement already sits inside an if-condition — recorded as unproven rather than claimed. `tests/hooks-crash-policy.test.cjs` adds the per-hook coverage the issue asks for, table-driven over all 19 hooks rather than 76 hand-written cases: normal allow, deny where a deny path exists, crash-honors-the-declared-policy, and an unclosed-stdin case — the one `process.exitCode` structurally cannot serve. The deny assertions encode each hook's ACTUAL stream split rather than a uniform shape, since four of the six deliberately differ. A drift guard enumerates `hooks/*.js` and fails if a terminating hook is ever added without a row. Writing those tests surfaced two hooks that emit a block decision in their JSON body and exit 0. Both were checked rather than assumed, and neither is a fails-with-success: `gsd-read-injection-scanner.js` is PostToolUse, where the tool has already run and exit 2 has no meaning, and `gsd-cursor-subagent-start.js` follows Cursor's JSON-body protocol. They are deliberately left alone — a mechanical sweep to `deny()` would have broken exactly these two. Verification runs on the remote runner. Refs #3911 * fix(#3838): the commit validator says when it could not validate #3911 claims to subsume #3838. Measurement said otherwise, so this closes it for real rather than by assertion. `set -euo pipefail`, added earlier on this branch, does NOT fix #3838: bash exempts a command used as an `if` condition from `set -e`, and all three of the hook's swallow-and-pass sites are exactly that shape. Verified against the hardened hook with a node shim that fails only the classifier call — a non-conforming commit still exited 0 with empty stdout AND empty stderr, indistinguishable from "your commit conforms". That is the defect verbatim. All three sites named in #3838 now capture the real exit status instead of consuming it as a condition, and each distinguishes its genuine negative from "could not run": - the classifier: 0 = is a git commit, 1 = genuinely not one, anything else = could not classify. Its `node -e` now wraps the require and the call in try/catch and exits 3 on a throw, so a broken require chain can never be mistaken for `isGitSubcommand` legitimately returning false — which is the arm that matters, since `token-scanner.cjs` is a gitignored build artifact and a fresh checkout lands there. - the opt-in config read and the JSON command extraction get the same treatment. On "could not run" the hook emits a diagnostic to stderr naming which check failed and why, then exits 0. The issue confirms this is safe — it is a PreToolUse hook, so stderr does not disturb the JSON protocol — and ranks it the smallest sufficient fix. The gate still fails open, but it can no longer do so silently, which is the whole complaint: a validator that disables itself quietly costs more than one that is absent, because it is trusted. Both controls are unchanged and pinned by tests: a conforming commit still passes silently, a non-conforming one still exits 2 with its existing block payload. The defect test asserts stderr is non-empty and names the failure; it fails against the pre-fix hook. Verification runs on the remote runner. Refs #3911, #3838 * docs(#3911): document the hook crash-policy contract Reference and Explanation via a new docs/features fragment (FEATURES.md is generated from it), INVENTORY rows for the three new hooks/lib files, and an ARCHITECTURE note on the hooks section. How-To: docs/how-to/declare-a-hook-crash-policy.md, indexed from docs/README.md — a hook author now has to choose and declare a crash policy, which is more than one step and crosses into which harness protocol their hook speaks. It covers allow/deny/crash, writing an ON_CRASH reason that is actually useful, when a deny needs a distinct stderr payload, the two hooks whose harness reads a JSON-body decision and must NOT use deny(), and what to do when a check cannot run at all — with #3838 as the worked example. Refs #3911 * test(#3911): prove the seam actually ships, and stop hand-rolling temp cleanup Two review findings. The acceptance criterion 'hooks/dist/** stays in parity via the build seam (lint:hooks-runtime-build-seam)' was misstated and unmet: that lint checks something else — that a hook requiring a compiled gsd-core/bin/lib module also calls ensureRuntimeBuild(). Nothing exercised that the three new hooks/lib files reach hooks/dist/lib at all. That gap is not theoretical: #770 is a recorded ship-blocking bug where a new hook never shipped because a copy list missed it. The suite now builds dist through the repo's own ensureBuiltHooks(), byte-compares each shipped copy against its source, and spawns a child that requires the SHIPPED dist copy and denies — which is what catches a copy that exists but cannot resolve its sibling registry. gsd-validate-commit.sh hand-duplicated mktemp/run/rm three times; one idempotent trap on EXIT replaces them, guarded so cleanup cannot alter the exit status. Behavior-neutral across five cases, with temp-file counts taken before and after each run. Refs #3911 * fix(#3911): stage transitive hook lib requires, not just one level The remote run returned 7 failures across 3 real causes. The important one is a PRODUCTION bug this phase exposed rather than caused. `writeCursorHooksJson` scanned each hook script for `./lib/X` requires exactly one level deep and never re-scanned the lib files it staged for their own sibling requires. Nothing had a transitive lib dependency before, so the gap was invisible. Adding hook-exit.js -> cli-exit.js -> exit-code-registry.js made real Cursor installs ship a bundle that dies at require time with MODULE_NOT_FOUND. It now walks to a fixed point, and a real installed Cursor hook runs to completion. The staging harness in shared-hooks-dir-resolution hand-copied its fixture, so the injection scanner crashed at require time and its exit-1 was being read as a policy decision. Migrated to copyScriptWithDeps, which walks the require graph — the repo's recorded rule for this class, since adding another copyFileSync keeps it alive for the next person. The missing-lib-source test in cursor-hook-workspace-roots hardcoded which lib file it expected to be named in the abort message; the same throw now fires for a different file first. Its assertion is unchanged in substance — staging still must abort rather than ship a broken hook — only the name is no longer pinned. The last one was my own test asserting an uppercase reason code. Measured against origin/next: the pre-change hook emits the same lowercase 'config_unreadable', so the test was wrong, not the migration. Corrected to the real value rather than making the code match the test. Verification runs on the remote runner. Refs #3911 * chore(#3911): regenerate the cursor install-tree golden The staging fix means a Cursor install now correctly carries the two transitive lib files it was silently missing. Additive only — no path was removed. The golden diff is the evidence the packaging defect was real. Refs #3911 * chore(#3911): backfill the changeset PR number Refs #3911 * fix(#3911): a git probe that timed out is not a negative A macOS CI lane failed three deny cases at 2084ms, 2112ms and 2177ms — just past the 2000ms budget these hooks give their git probes. The three that passed took 72ms, 595ms and 651ms. Under shard contention `git rev-parse` overruns, the hook reads the non-zero result as "not a git repo", and allows with exit 0 and empty stdout AND empty stderr. Under load, the guards silently stop guarding. That is ADR-3889's thesis exactly, sitting inside the security hooks this phase is about. The repo had already recognized the class in one place — gsd-cursor-subagent-start.js fail-closed-denies on `git_timed_out` (#3045) — but nowhere else. `hooks/lib/git-probe.js` classifies a probe's outcome, distinguishing a real non-zero exit from ETIMEDOUT, a signal kill, and a spawn failure, rather than folding all four into `status !== 0`. Three guards route their eight git probes through it. The resolution is the same shape #3838 took, and the same one that issue endorsed as smallest-sufficient: fail open, but loudly. **No exit code changes on any path** — a developer on a loaded machine is still not blocked, which keeps #3911's declaration-pass contract intact for exit codes. What changes is that the hook now says on stderr which probe could not answer, instead of presenting silence as a clean verdict. Scope was checked across every hooks/*.js, not just the three that failed: gsd-agent-isolation-guard spawns no git; gsd-statusline's two probes gate only a cosmetic display segment, not an allow/deny decision, and are left alone. The C2 deny assertion was a real-race test — it demanded exit 2 while a slow git legitimately yields 0. It now requires the hook to either deny, or allow with a diagnostic naming the probe that could not run; a silent allow still fails, so the assertion is not vacuous. A deterministic regression stubs git on PATH to sleep past the budget rather than waiting for load to reproduce it. Verification runs on the remote runner. Refs #3911 * test(#3911): a PATH shim cannot intercept the hooks' git spawn on Windows The deterministic timeout regression stubbed git on PATH and asserted the guard reports rather than silently allows. It passes on Linux and macOS and failed on Windows in 83ms and 176ms — the stub was never invoked at all. Mechanism: the hooks call spawnSync('git', args) with no shell:true, so on Windows CreateProcess resolves git.exe only and never a PATH .cmd shim. The git.cmd branch could not have worked and is removed rather than left implying a Windows path that does. Adding shell:true to the hooks to serve a test would change product behavior and widen an injection surface, so the case is skipped on win32 only, with the mechanism written into the skip reason so a future reader does not 'fix' it that way. Linux and macOS keep the coverage, and macOS is where the underlying fail-open was actually caught. Refs #3911 --------- Co-authored-by: sim <sim@local>	2026-08-27 22:21:10 -04:00
Tom Boucher	c7c2fe3c2b	fix(#2587): resolve cursor hook workspace from workspace_roots, not cwd (#2680) ... * fix(#2587): resolve cursor hook workspace from workspace_roots, not cwd gsd-cursor-session-start.js and gsd-cursor-stop.js both resolved the project as path.join(process.cwd(), '.planning', 'STATE.md'). Under the cursor-agent CLI, hooks are invoked with cwd set to the Cursor config dir (~/.cursor), not the workspace — so the lookup always missed. sessionStart could only ever emit the "no .planning/ workflow found" nudge and stop's verify-work reminder could never fire, even with .planning/STATE.md sitting in the workspace. Slash commands were unaffected, which is why only the hook layer looked blind. Both hooks already buffered stdin into `raw` and never parsed it; the payload's workspace_roots carries the real path. Multi-root was left open in the report ("first root vs any root"). Resolved forward: prefer the first root that actually carries .planning/STATE.md, so a workspace whose GSD project is not the first root still resolves — strictly better than first-root-only and identical to it in the single-root CLI case. Falls back to roots[0], then to cwd, keeping IDE behavior unchanged if the IDE ever invokes hooks from the workspace. The resolver is duplicated verbatim across the two scripts rather than shared via hooks/lib/: these hooks ship standalone, and a new hooks/lib/ file must be registered in the GENERATED installer's GSD_HOOK_LIB_FILES allowlist — the installer-omits-shipped-file class that yields MODULE_NOT_FOUND at runtime. Per CLAUDE.md "Generative Fix Divergence", the duplication carries a parity assertion so the copies cannot drift. Failing-first, demonstrated by direct invocation with cwd != workspace: pre-fix sessionStart -> "no .planning/ workflow found" stop -> {} post-fix sessionStart -> ".planning/STATE.md is present" stop -> reminder tests/fix-2587-cursor-hook-workspace-roots.test.cjs spawns the real scripts as child processes with a cwd lacking .planning/ and workspace_roots pointing at it. Boundary coverage on the roots array (0 / 1 / 2 entries), plus malformed-JSON fail-open, junk-entry filtering, the parity assertion, and a guard that neither script resolves .planning from cwd again. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015TCwhbMuY37DzRMCfzTABJ * fix(#2587): extend workspace_roots fix to subagentStart; keep cwd a candidate Three findings from the isolated review, all fixed. 1. MISSED SITE (high). gsd-cursor-subagent-start.js carried the identical defect at line 43 — its own header documents workspace_roots in the input schema, but it resolved .planning/ from process.cwd() anyway. Under the cursor-agent CLI that meant every Cursor subagent (planner, executor, verifier) started with "no .planning/ workflow found" and no phase context. The report named only sessionStart and stop; the defect class was wider. Verified pre-fix vs post-fix by direct invocation with cwd != workspace. 2. SEMANTIC NARROWING (medium). The first cut searched only workspace_roots and fell back to cwd solely when the array was EMPTY. So when roots were supplied but none carried .planning/ while cwd did, the hook reported absent — where the pre-fix code, which always used cwd, reported present. That contradicted the fallback's own stated intent of preserving IDE behavior. cwd is now a CANDIDATE in the search (`[...roots, process.cwd()]`), so the fix is a strict superset of both the old behavior and the CLI fix, never a narrowing. 3. STALE GOLDEN FIXTURES (high, would have failed CI). The golden-install-parity fixtures store a content hash per installed file; these three hooks appear in 13 of the 19 runtime fixtures. Regenerated via `npm run gen:golden` — the diff is exactly the three hook hashes in exactly those 13 runtimes. Tests extended: subagentStart resolution via workspace_roots; the stop hook's absent branch (previously only session-start's was covered); an explicit regression guard that a project at cwd is still found when roots miss; parity now asserts all THREE copies byte-identical; and the cwd guard sweeps the whole RESOLVING_HOOKS list so a future hook in this family cannot be left on cwd. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015TCwhbMuY37DzRMCfzTABJ * refactor(#2587): extract cursor workspace resolution to a shared hooks/lib module The duplicate-plus-parity-test approach was the wrong call. The reported issue named two hooks; a third (subagentStart) had the identical defect. That is the signature of a systemic problem, and three copies of a resolver guarded by a parity assertion is a divergence risk maintained by hand rather than a fix. hooks/lib/cursor-workspace.js is now the single implementation. All three Cursor hooks require it; none defines a local copy. Divergence is prevented structurally instead of by asserting three copies stay byte-identical. The reason duplication looked necessary was real, and is fixed properly here rather than worked around: Cursor sets hostBehaviors.skipSharedHooksInstall (#2089), so it never reaches the installer's bulk hooks/lib copy — it was the ONE runtime shipping these hooks WITHOUT hooks/lib (verified against all 19 golden fixtures: cursor had the hook scripts, no lib). A naive require would have thrown MODULE_NOT_FOUND at load, BEFORE each hook's own try/catch, wedging every session on precisely the runtime this bug is about. writeCursorHooksJson (src/runtime-hooks-surface.cts) now stages the hooks/lib helpers the staged scripts actually require, discovered by scanning their require('./lib/…') calls rather than a hardcoded name — so a future helper cannot be silently omitted. This is narrower than flipping skipSharedHooksInstall, which would wrongly pull in every shared hook. cursor-workspace.js is also added to GSD_HOOK_LIB_FILES so uninstall and the manifest manage it for the runtimes that do receive hooks/lib. Verified against a REAL install (runMinimalInstall, cursor/global): the helper is staged, and all three INSTALLED hooks resolve the workspace end-to-end from a cwd that is not the project. Also closes the review gap that the stop hook was excluded from the cwd-candidate regression loop — it now sweeps RESOLVING_HOOKS. The byte-parity test is replaced by a structural guard (every hook requires the shared module, none redefines it) plus a new install test asserting the helper is staged and the installed hook actually loads against it. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015TCwhbMuY37DzRMCfzTABJ * fix(#2587): fail loud on a missing hook lib source; drop unsubstituted version marker Two findings from the installer-focused review. H1 — the staging step's `if (!fs.existsSync(libSrc)) continue;` silently defeated the very guarantee it was added for. Reproduced: delete hooks/lib/cursor-workspace.js from source, run the cursor install — it exits 0, prints "Done!", and ships the three hook scripts with an EMPTY hooks/lib/. The installed hook then throws `Cannot find module './lib/cursor-workspace.js'` at load, before its own try/catch, wedging every session — and nothing surfaces until a user hits it. The scan protected against a required-but-UNLISTED helper while leaving required-but-MISSING wide open (typo, bad rebase, an accidental delete). It now throws: a missing helper source is a packaging bug and aborts the install. M1 — hooks/lib/cursor-workspace.js carried a `gsd-hook-version: <placeholder>` marker that NOTHING substitutes: copyLibDir stamps .sh files only, and writeCursorHooksJson's staging applies just the colon-to-dash rewrite. Verified the literal was reaching disk on both the bulk (--claude) and Cursor (--cursor) paths. hooks/lib/git-cmd.js — the only pre-existing hooks/lib/*.js — carries no such marker, so this was newly introduced, not inherited. Marker removed, matching that precedent, with a note on why. (The explanatory comment deliberately does not spell the token out, or it would reintroduce the literal.) M2 — the require-scan regex demanded the exact compact form, so `require( "./lib/x.js" )` would silently fail to stage its helper and compound H1. Now tolerant of interior whitespace and either quote style. Regression test added for H1 — the reviewer confirmed the invariant had zero coverage repo-wide: a source tree carrying the hooks but no hooks/lib/ must make writeCursorHooksJson throw rather than produce a broken install. Re-verified end to end: the missing-source case throws, no unsubstituted literal ships, and the installed hook still resolves the workspace from a foreign cwd. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015TCwhbMuY37DzRMCfzTABJ * chore(#2587): backfill changeset pr number (#2680) --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-07-26 19:57:58 -04:00
Tom Boucher	1040fb792e	feat(#777): register Cursor-native hooks (.cursor/hooks.json) for session-start/post-tool parity (#831) ... * feat(#777): register Cursor-native hooks (.cursor/hooks.json) for session-start/post-tool parity - Add gsd-cursor-session-start.js: injects STATE.md presence reminder (or new-project nudge) into Cursor sessions via the sessionStart hook event - Add gsd-cursor-post-tool.js: emits an additional_context nudge when write-class tool calls touch .planning/ files (postToolUse hook event) - Add 'cursor-hooks-json' installSurface to runtime-config-adapter-registry; writeCursorHooksJson/reconcileCursorHooksJson write the canonical { version: 1, hooks: { sessionStart, postToolUse } } JSON shape with idempotent reconciliation that preserves user-owned hook entries - Hook scripts are copied with /gsd:→gsd- rewrite so installed files contain no colon-form slash-command refs (bug-376 invariant) - 20 new tests in tests/cursor-hooks.test.cjs cover all reconciler paths, entry helpers, removal, runtime adapter surface, and hook script behavior - Update CONTEXT.md, ARCHITECTURE.md, installer-migrations.md, and 000-first-time-baseline.cts to include Cursor hooks.json surface Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#777): build hooks/dist on demand in bug-376 test for scoped/windows CI hooks/dist is gitignored and only produced by `npm run build:hooks`. The CI scoped (ubuntu-latest/node-22) and windows (windows-latest/node-24) test jobs do NOT run build:hooks before executing tests, so bug-376's prerequisite suite was failing with "hooks/dist not found" on both legs. Add ensureHooksDist() helper (mirrors bug-3357 pattern) that builds hooks/dist on demand in the before() hooks of prerequisite and Suite 3. Also add ensureHooksDist() call to Suite 3's before() so the snapshot step is also hermetic. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>	2026-06-07 19:22:48 -04:00