11cdc19e391d00edfb18f8cc5eb9e31a4f6e5d4d
7 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Tom Boucher
|
941b62249e |
enhance(#3906): two terminators over one registry, with a versioned exit projection (#3924)
* feat(#3906): two terminators over one registry, with a versioned projection Adds terminateNow (write-then-terminate, for callers that cannot wait for the event loop) beside runMain (drain-then-exit), both projecting through one shared function so they cannot disagree - the parity the ADR makes mandatory. A failed write does not change the exit code: letting it propagate would fail a hook open, which is what the fail-closed branches exist to prevent. The projection is versioned. v1 reproduces today's integers, including keeping a payload-carried degraded result at exit 0 - ADR-2980 ratified that across 60 sites and declined normalizing it on measured blast radius. v2 applies the registry. --exit-contract=v2 or GSD_EXIT_CONTRACT=v2 selects it; an unrecognized version throws rather than silently defaulting. The registry is now emitted beside both copies of the exit module, so it resolves as a sibling in the built tree and in the committed scripts/ copy that must load on an unbuilt clone. * fix(#3906): actually restrict code 2 to terminateNow, and generate the registry's type The claim that terminateNow is the only place 2 can be produced was false: runMain's outcome arm applied no guard, so runMain(()=>'HOOK_DENY') set exitCode 2 through the drain path - and the parity matrix demonstrated it while calling it parity. runMain now refuses any outcome projecting to the hook-protocol code, gated on the code rather than the name so an alias cannot slip past, and the matrix asserts the restriction instead of contradicting it. The ambient type for the generated registry was hand-written with no gate against the generator's actual output - the declared-surface-diverges-from-runtime defect class this epic exists to close, reintroduced inside it. It is now a third generated artifact covered by the same --check. Also converts every test-body try/finally to t.after(). * test(#3906): derive the glossary fixture's dependencies instead of hand-listing them Adding a require to scripts/lib/cli-exit.cjs broke 31 tests in one suite that built its fixture from a hand-written dependency list, so the new sibling was absent and the copied script could not load. copyScriptWithDeps walks the require graph and exists for exactly this class - #3412 paid the same bill when one new require broke 82 tests across two suites. Migrating rather than adding another copyFileSync line keeps the class closed. The other nine suites referencing that path were triaged; none copies-and-spawns, so none needed migrating. * fix(#3906): enumerate the new shipped file, drop a vendor name from shipped data, and fix three test defects install: scripts/lib/exit-code-registry.cjs was missing from GSD_SCRIPTS_LIB_FILES, so it shipped to every install and orphaned on uninstall. The registry gave HOOK_DENY a meaning naming one harness, and that string ships into every runtime's tree - a guard correctly caught it leaking into the hermes and qwen installs. The registry is runtime-neutral infrastructure; the vendor name belongs in the ADR, not in shipped data. Two more fixture harnesses built their trees from hand-listed dependencies and broke on the new require; both migrated to the derived helper, and all 23 copy-and-spawn candidates were enumerated so the class is closed rather than patched. One generator test used a fixture code that collided with a real allocation, so the generator correctly reported a duplicate where the test expected drift. The large-payload test embedded a 256KB literal in the child's argv, exceeding Linux's 128KiB MAX_ARG_STRLEN so the child never started - it now builds the payload inside the child. * chore(#3906): backfill changeset pr number * docs(#3906): document the exit-code contract selector P2 is the first phase of this epic with a user-invocable surface, so the flag and env var owe a reference entry. Records what actually differs between v1 and v2 today (one outcome), that an unrecognized value is rejected rather than silently defaulted, and the fail-safe property that makes switching safe. --------- Co-authored-by: sim <sim@local> |
||
|
Tom Boucher
|
e20744eacb |
enhance(#3884): failure is a value — strict argv, and --pick that signals absence (#3922)
* test(#3884): failing-first coverage for strict argv and absence-signalling --pick ADR-3473 §8.4 says failure is a value. Three families currently encode failure as success, and this commit pins each one RED before the fix lands. Measured on this tree, 2026-08-26: gsd-tools generate-slug "test" --pick nonexistent -> empty stdout, exit 0 (#3365) gsd-tools audit-open --pick nonexistent_field -> dumps the entire human-readable audit report, exit 0 gsd-tools generate-slug "Hello World" --raw --pick bogus -> prints "hello-world", another field's value, exit 0 gsd-tools query state.planned-phase 3 (positional, no --phase) -> exit 0; STATE.md's "Phase: 2 of 5 (Widget Support)" is overwritten to "Phase: null - READY TO EXECUTE" and the frontmatter gains a corrupted current_phase_name (#3358) tests/pick-flag.test.cjs:27 previously asserted the #3365 defect as the contract ("returns empty string for missing field", success === true). That assertion is replaced by the required behavior rather than deleted. The new parseNamedArgs block calls the spec-object signature that does not exist yet, so it fails today by construction. The 11 existing behavior-lock tests are left untouched here; they are corrected in the implementation commit. C1/C4 assert at the consumer's output - STATE.md's bytes - per ADR-3180 Decision 4(b). A unit assertion on the parser would have passed throughout this defect's life. Design: .gsd/phase/feat-3884-failure-is-a-value/40-design.md Test matrix: .gsd/phase/feat-3884-failure-is-a-value/50-test-matrix.md Refs #3884 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * enhance(#3884): failure is a value — strict argv, and --pick that signals absence Implements ADR-3473 §8.4. Absence, emptiness and failure stop being interchangeable ways to say "I could not answer". parseNamedArgs (src/command-arg-projection.cts) Takes a spec object with a REQUIRED `positionals: number | 'rest'` and returns the hub's Result shape instead of a bare Record. Declaring the positional arity is what makes #3358's call site unrepresentable rather than merely detectable: an unrecognized flag or a token past the declared boundary is now InvalidArgs, naming the offending token and listing the accepted flags. The legacy positional-array call shape throws a TypeError — an internal invariant violation per ADR-3473 Decision 2, so a stale hand-written .cjs call site fails loudly instead of destructuring undefined off a Result. parseNamedArgsOrExit projects a failure onto the caller's error(); it is a projection over the one parser, not a second parser. Measured before, against a STATE.md with a populated phase-2 block: query state.planned-phase 3 (positional, no --phase) -> exit 0; "Phase: 2 of 5 (Widget Support)" overwritten to "Phase: null - READY TO EXECUTE", frontmatter gains a corrupted current_phase_name After: exit 1, `unexpected positional argument "3"`, STATE.md byte-identical. The flag form is unchanged and still updates STATE.md. --pick <field> (gsd-core/bin/gsd-tools.cjs) extractField returns {found,value}, and the pick block no longer shares one catch between "output was not JSON" and "field was absent". An absent field exits 1 with pick_field_absent, naming the field and the keys that do exist; non-JSON output exits 1 with pick_output_not_json instead of dumping the command's entire output. A field that is PRESENT with value null, '', 0 or false still prints at exit 0 — that is an answer, not a failure, and it is what keeps `--pick count` printing 0 on a fresh project. Measured before: `audit-open --pick nonexistent_field` printed the whole human-readable audit report at exit 0, and `generate-slug X --raw --pick bogus` printed "hello-world" — a different field's value, confidently, at exit 0. ADR-3409 Decision 7 explicitly deferred this contract fix to #3473; this is it. The sub-issue's "returns 0 when the count is zero OR absent" wording is superseded by the ADR rule it implements: zero prints 0, absence exits non-zero. Defaulting absence to 0 would demote "could not answer" to "the answer is zero" — the hazard docs/how-to/resolve-unreachable-guard-findings.md already warns against. Guard ledger (ADR-3473 Decision 6) scripts/lint-unreachable-guard-drift.cjs Detector A is RETIRED. Its premise — that a `--pick ... || echo` arm can never fire — is now false, so the shape it forbade is the correct idiom and keeping it would forbid the fix. Detector B (glob-consuming cat/ls, a nullglob mechanism this change does not touch) is retained in full, as are the shared scanner, the escape-marker parser and the baseline. Net: -1 detector, 0 added. The file is not deleted. Call-site audit 45 prompt-layer --pick invocations, every one a plain X=$(...) assignment — none in an if test, && chain, or a pipeline whose status is consumed, and no shell block in workflows/commands/agents/references sets -e. Of the 13 (command, field) pairs the prompt layer reads, 10 are always present; the 3 sometimes-absent ones each sit behind a prior found/existence check. No ADR-3409-class "field the command never produces" remains. Design: .gsd/phase/feat-3884-failure-is-a-value/40-design.md Test matrix: .gsd/phase/feat-3884-failure-is-a-value/50-test-matrix.md Refs #3884 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(#3884): escape untrusted tokens in diagnostics, and cover five unpinned rows Two review findings, both fixed here rather than recorded as limits. 1. A newline in an untrusted token forged a second stderr line. Before, plain-text mode: $ gsd-tools query state.planned-phase $'foo\nError: forged second line' Error: unexpected positional argument "foo Error: forged second line" After: Error: unexpected positional argument "foo\nError: forged second line" --json-errors mode was never affected — io.error runs that payload through JSON.stringify. Plain-text mode writes 'Error: ' + message verbatim, and the three new InvalidArgs reasons plus the two new --pick diagnostics all interpolate a token that comes straight from argv. Fixed with ONE shared helper, formatDiagnosticToken (src/io.cts), applied at every interpolation site — not a copy per site. It is deliberately NOT applied inside error() itself: several callers in this tree emit intentional multi-line diagnostics, and escaping newlines there would mangle them. The available-top-level-keys list needed the same treatment for a reason the review did not anticipate: `frontmatter get <file>` reads an ARBITRARY user document and echoes that document's own keys into the diagnostic. Verified reachable — a frontmatter key containing a newline reaches the key list — so formatKeyForDiagnosticList is guarding a live path, not a hypothetical one. Ordinary keys still render plain and unquoted; a fix that merely dropped the key would also have passed a "one line" assertion, so the test pins the escaped key's presence too. 2. Five behavior-table rows were implemented but nothing pinned them: B7 a dotted path that dies partway B9 bracket syntax on a non-array B10 a negative array index, in and out of range B14 a JSON root that is not an object B17 an @file: payload over 50KB B17 is the load-bearing one. output() writes @file:<path> instead of inline JSON past 50000 characters, and --pick resolves that BEFORE parsing; with no test, a future reordering of those two steps turns every large result into a false pick_output_not_json. The fixture seeds 1200 phase directories and measures the payload at 62474 characters, asserting the spill actually happened rather than assuming it. Refs #3884 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(#3884): correct the strict-argv surface against a full verification run The first full run came back with 90 failures across 12 files, none in the new tests. They were the argv surface telling me what it actually is. Ten root causes; each classified before anything was changed. I over-implemented, and that is reverted. ADR-3473 §8.4 says parseNamedArgs rejects "unrecognized and positional tokens". It says nothing about a value flag whose value is missing. Making that an error was my design decision, not the rule, and it broke a deliberately recorded contract: `--prd` with no value resolving to null (tests/init.test.cjs emptyPrdValueIsFalsyAndTreatedAsAbsent, row B5; tests/section-manifest-init-facts.test.cjs "flag-shaped value"). The "requires a value" branch is deleted outright rather than kept behind an option — an unused strictness mode is speculative generality. Unknown-flag and unexpected-positional rejection, which is what §8.4 actually mandates, is unchanged. --wave needed a third flag kind the original design did not anticipate. `--wave N` is documented (commands/gsd/execute-phase.md:4,48) and the shipped workflow reconstructs and passes it (execute-phase.md:84), while #2932 records token-PRESENCE semantics: the CLI cares only that the flag appeared, and the value belongs to the workflow layer. That is neither a boolean flag nor a value flag, so `optionalValueFlags` now exists — presence-only in `data`, and the validation cursor consumes a following non-flag token so it is not reported as a stray positional. Every other declared boolean flag was checked against every argument-hint and prose usage in commands/, workflows/, agents/ and docs/; `--wave` is the only one of this shape. Five tests were pinning forms that never worked. tests/adr857-core-without-capabilities.test.cjs passed `init plan-phase --phase 01-stub`, but the documented form is positional (docs/CLI-TOOLS.md:776) and the handler reads args[2] — which for that form is the literal string "--phase". Measured on the pre-fix build against a real .planning/phases/01-stub/ directory: init plan-phase 01-stub -> phase_found=true init plan-phase --phase 01-stub -> phase_found=false The test asserted only exit 0 and key presence, so it had been green while proving nothing about phase resolution. Corrected to the documented form and strengthened to assert phase_found === true. Same class in state.test.cjs (`--plan-count`, a flag that does not exist; the real one is `--plans`), milestone-archive.test.cjs (`init new-milestone --json`, silently ignored), and concurrency-safety.test.cjs (a bare positional field name whose OR-assertion passed because a whole-document dump happens to contain the substring it looked for). Six handlers had no argv validation at all — the same #3358 shape this phase exists to close, found while fixing the rest: init verify-work / phase-op / review / todos / remove-workspace read args[2] with nothing checking the rest, and validate health read --repair/--backfill through a bare args.includes() scan that bypassed the parser entirely. All now go through the seam, so the flag has one owner. tests/init-debug.test.cjs rows C4/C5 asserted that an unrecognized flag must NOT fail. That is the behavior §8.4 removes, and Decision 8 says a caller's local expectation does not override §8, so they are inverted and renamed — a test still called "ignores an unrecognized flag" while asserting rejection would be its own defect. Row C6's point is its PWNED canary; that assertion is kept verbatim and only its exit-status expectation changed, because the hostile token is now rejected rather than absorbed. The blast-radius estimate in 40-design.md is corrected rather than quietly left wrong. get_impact reported MEDIUM / 8 symbols upstream, and that was accurate for what the graph can see — parseNamedArgs's callers. It cannot see that those callers' handlers accept argv shapes wider than the code reading args[2] suggests, which is where the real surface was. Refs #3884 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(#3884): withdraw the validate-health tightening, finish the A2/A3 revert Second full run: 46 failures, down from 90. Four causes, two of them mine. Reverted `validate health` entirely — it was scope creep, and it broke a real flag. ~30 of the 46 read `unknown flag "--json"; accepted: --repair, --backfill`. The previous commit routed `validate health` through the parser on the reasoning that a flag should have one owner. That was wrong twice over: §8.4 names parseNamedArgs and count queries, and `validate health` was never a parseNamedArgs call site — it read its flags, just not through the parser, so it had no silent-drop defect to fix. Tightening it omitted `--json`, which the health-diagnostic suites use heavily. The handler is now byte-for-behaviour back to its pre-branch form. `validate context` stays converted: it genuinely was a call site, and its `--json` is now declared rather than read by a second `args.includes` scan. The five handlers that had NO validation at all — init verify-work / phase-op / review / todos / remove-workspace — stay fixed. Those read args[2] with nothing checking the rest, which is the #3358 shape this phase owns. Finished the A2/A3 revert. Three tests still encoded the deleted "a value flag with a missing value is an error" rule, including one added by the previous commit for that rule. All three now assert the reverted null contract, and the ones whose titles said "rejected" are renamed — a test named for a contract it no longer asserts is its own defect. `--wave=` and `--wave --weird` are correctly rejected. Neither is documented in commands/gsd/execute-phase.md, gsd-core/workflows/execute-phase.md or docs/, and neither is emitted by the shipped prompt layer, so both are unrecognized tokens that §8.4 mandates rejecting. `doesNotConsumeFollowingFlagAsWaveValue` keeps the property it exists for — asserted directly now, at the parser, that `--wave` does not swallow a following flag as its value — and only its exit-status expectation changed. A contradiction inside this branch, surfaced by the audit and resolved the safe way. Two pre-existing #3573 tests call `state begin-phase '2'` and `state planned-phase '2'` with a bare positional, relying on the old permissive parser to ignore it. This branch's own #3358 regression test requires that exact argv to be REJECTED. The two are mutually exclusive. Widening the router to accept a bare positional — mirroring complete-phase — would have silently re-opened #3358, and was verified to do exactly that: with the widened router, `query state.planned-phase 3` returned exit 0 and wrote current_phase_name again. It is reverted. docs/CLI-TOOLS.md:116 and docs/COMMANDS.md:2192 document only the `--phase N` form for both verbs, so the two #3573 tests move to it. Their assertions were never about the call shape — only that total_phases survives the resync — and both still pass. complete-phase is untouched: its bare positional IS documented, and it keeps the dynamic boundary and the negative-space note that record why. The audit that produced this is in the PR body: for every handler whose declaration changed, the flags it reads anywhere in its body, the flags the shipped surface documents, and the shapes the suite passes, compared. The `--json` miss was a pattern, not an accident — declaring a handler's flags from its parseNamedArgs call alone misses whatever it reads elsewhere. Refs #3884 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * chore(#3884): backfill the changeset PR number Refs #3884 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: sim <sim@local> Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
Tom Boucher
|
8edace40d5 |
enhance(#3904): one exit module — generate the scripts-side copy from a single source (#3917)
* test(#3904): failing-first coverage for the drifted scripts-side exit module The scripts/ copy of the CLI exit seam has no json-error arm, so an unexpected throw prints a raw stack where the documented contract promises {ok:false,reason,message}. Adds the consumer-altitude reproduction plus the negative space it must not swallow, the one-cell assertions for json-error mode, and the standalone-load constraint. RED until the generator lands. * enhance(#3904): generate the scripts-side exit module from one source src/cli-exit.cts becomes the single source of truth and scripts/lib/cli-exit.cjs a generated artifact of its compiled output, byte-compared by a --check entry in lint:generated-sync. The two had drifted: only the .cts copy emitted the documented {ok:false,reason,message} envelope on an unexpected throw, so a scripts-side tool printed a raw stack where docs/json-errors.md promises structured output. The generated file is committed and must load on an unbuilt clone (64+ consumers, incl. check-env.cjs), and gsd-core/bin/lib/cli-exit.cjs is gitignored tsc output that doubles as the build sentinel, so it cannot be required from there. The exit module therefore drops its io.cjs import: the json-error-mode accessors move into it and io.cts re-exports them, leaving its export surface unchanged. The flag lives in a Symbol-keyed cell on globalThis because one source emitted to two locations means two module instances, and a module-level flag would give them two independent values. * chore(#3904): changeset for the generated scripts-side exit module * docs(#3904): name which surfaces honor the json-error envelope contract docs/json-errors.md described the structured envelope as what runMain does without saying which copies of runMain actually had the branch — a claim that was silently false for every scripts/-side tool. Also drops a redundant source-grep test whose marker grew the unverified allow-test-rule pool past its ceiling; the behavioral test beside it proves the same property through real module resolution. * test(#3904): compare exit verdicts, not stderr bytes, across the two copies The parity test asserted byte-identical stderr, which the plain-text path cannot satisfy: the generated copy carries an 11-line banner, so its stack frames report line numbers offset by exactly that much, and the path normalizer stopped at the colon. Byte-identical stack traces were never the contract - two files at two paths necessarily differ there. Now compares the parsed envelope under json mode, the first line and exit code on the stack path, and exact output for ExitError. * chore(#3904): backfill changeset pr number --------- Co-authored-by: sim <sim@local> |
||
|
Tom Boucher
|
9faacc0c15 |
test(#3148): bound the long tail and delete the unbounded-spawn allowlist (#3192)
* test(#3148): bound the long tail and delete the allowlist Migrates the final 170 unbounded sync spawn sites across 49 files, then removes the allowlist entirely. local/no-unbounded-spawn now runs with no exemption surface across tests/**: there is no file to add a name to. drift-detection's throw-native git() helper routes to gitOrThrow -- bare runGit would have taken 16 call sites quiet on failure. commands.test.cjs has two independently-scoped runGsdTools/runCli helpers, one already bounded and one not; they are kept distinct rather than unified, the same trap as the two same-named git() helpers in Wave 1. runNpm's bound was erasable. Its options spread callerOptions after the defaults, so an explicit timeout:undefined silently dropped the 180000ms bound -- the rule flagged it and was right; it was not a false positive. Fixed by destructuring with a default, with a test that fails when the default is removed. Two sites stay on a raw spawn with an explicit timeout because the seam cannot express them: one needs shell:true for npm.cmd on Windows, one redirects stdout to a real fd. Both are the rule's own documented second option, not an escape from it. Closure verified rather than asserted: the derivation scan reports 0 unbounded spawn helpers and 0 unbounded direct git call sites, and a temporary file carrying an unbounded spawn still errors with the allowlist gone. Closes #3064. * test(#3148): close a hole in the guard's own eslint-disable ban The ban listed only the top level of tests/, so it was blind to 37 .cjs files under tests/helpers, qa, observability, fixtures and dispatch. With the allowlist deleted this test is the sole remaining way to detect someone silencing the rule inline, so the gap was load-bearing: a nested file could carry an unbounded spawn plus an eslint-disable and pass everything. Proven before and after. A probe planted under tests/helpers with both was invisible to the guard and clean under eslint; after making the listing recursive the guard fails on it. The scanned set goes from 771 files to 808. Pre-existing since the guard shipped, but this wave is what promoted it to sole defense, so it is fixed here rather than filed. Also converts the last hand-rolled throw check to throwIfFailed and the last re-derived legacy shape to compose toLegacyResult, which makes the epic's none-remain claim true rather than nearly true. toLegacyResult itself is not widened -- eight callers depend on its shape and one consumer does not justify changing a shared contract. * fix(#3148): correct seam incoherence at the bound and a slow review-lane error path Two real failures from the remote runner, both fixed at the cause. The seam could return outcome TIMED_OUT together with exitCode 0. At the exact bound spawnSync reports ETIMEDOUT while the child has already exited with a real status, and toSeamResult classified on the error code while passing status straight through -- an incoherent pair its own boundary test was written to catch, and did. A status that is not null is direct evidence the child exited on its own, so it now decides the outcome before the error-code branches run. process-seam.cjs was deliberately untouched by every earlier wave; this is a defect in the module itself, kept surgical, with a unit test that fails against the old logic. review-lane with an unknown subcommand fell through to its usage error only after loading the capability registry and building a per-lane plan, which spawns one child process per lane -- up to twelve. The error path took ~1288ms instead of ~119ms, and under bench load it outran a caller's spawn timeout and was killed before writing anything, which is the empty stdout and stderr CI saw. It now fails fast before any of that work begins. This is the epic's first production change. It is user-facing, so it carries a changeset rather than a no-changelog label. * test(#3148): replace a real-race timeout test with a deterministic one E9 raced git rev-parse against a 1ms bound and assumed git always lost. On a warm container git finishes first, spawnSync returns status 0 with no error at all, the seam correctly classifies EXITED, and gitOrThrow correctly does not throw -- so the test failed on both lanes. A probe confirms a genuine timeout always carries status null, so this was never the seam misbehaving. Raising the bound would only lengthen the odds, which is the same defect with better luck. The test now drives gitOrThrow against a stubbed runGit that returns a synthetic TIMED_OUT result, so it asserts exactly what it always meant to -- that a timeout propagates as a throw -- with no timing dependence. Five consecutive runs are identical where the old one varied. I wrote this test in Wave 0; it is a real-race test by construction and CLAUDE.md says to replace those rather than re-run them. * chore(#3148): backfill changeset PR number 3192 --------- Co-authored-by: sim <sim@local> |
||
|
Tom Boucher
|
955655407c |
fix(#2979): document ExitError plain-text carve-out in json-errors.md (#3093)
* fix(#2979): document ExitError plain-text carve-out in json-errors.md The JSON-errors doc claimed every error emits a structured JSON envelope, but usage errors (ExitError) intentionally emit plain text with their own exit code (src/cli-exit.cts:36-39 catches ExitError before the envelope branch). Anyone following the doc's 'always parse stderr as JSON' guidance against a usage error got a parse failure. Amended the Wire format + Overview + Writing tests sections to scope the structured envelope to non-ExitError failures, stated the carve-out with a pointer to cli-exit.cts, and scoped the JSON-parse instruction to the envelope branch. Added a characterization test pinning both paths together (ExitError -> plain text + own code; non-ExitError -> JSON envelope) so the code cannot drift toward the doc's prior overstated claim. No runtime change — the test passes before and after the doc edit. Re-scoped per maintainer triage: the smart-entry --json part is already satisfied (shipped payload exposes the command token); only the doc correction + characterization test remain. * chore(#2979): backfill changeset PR number 3093 --------- Co-authored-by: sim <sim@local> |
||
|
Tom Boucher
|
22bb82e205 |
fix(#965): emit structured json error for unexpected handler throws under --json-errors (#987)
* fix(#965): emit structured json error for unexpected handler throws under --json-errors When GSD_JSON_ERRORS=1 / --json-errors is active, an unexpected (non-ExitError) throw in a handler now emits { ok: false, reason: "sdk_fail_fast", message } to stderr instead of a raw stack trace. The plain-text behaviour (no json-error mode) is unchanged. Closes #965 * chore(#965): backfill changeset pr number (987) --------- Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> |
||
|
Tom Boucher
|
f729101eec |
refactor(scripts): replace process.exit() with ExitError + runMain handler (#739) (#740)
Part 1 of 2 of the n/no-process-exit cleanup (umbrella #738): convert every process.exit() call in standalone scripts/** CLIs to the rule-compliant pattern. - New shared helper scripts/lib/cli-exit.cjs: ExitError(code,message) + runMain() which translates a thrown ExitError / returned number into process.exitCode (never process.exit()), flushing output and still firing process.on('exit'). - main()-based entrypoints: throw new ExitError(code) for errors, return <code> for verdicts; invoked via runMain(main). Child exit codes preserved via return. - top-level-only scripts: imperative body extracted into main() so mid-flow aborts (throw ExitError) actually halt; pure consts/helpers stay at module scope. - diff-touches-shipped-paths.cjs: stdin event handling restructured to an async read so the whole flow runs under runMain; uncaughtException/unhandledRejection nets replaced by an in-band catch that preserves EXIT_ERROR=2. Exit codes verified unchanged for every converted script (success/error/help and the 0/1/2 semantic codes in diff-touches). Rule stays warn here; flipped to error in part 2 (#738) once gsd-core/bin/** is also clean. Refs #739 Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |