4 Commits

Author	SHA1	Message	Date
Tom Boucher	6dbc124018	enhance(#3180): the sibling validators share one envelope and one owner — Phase 12 (#3407)	2026-08-13 11:31:16 -04:00
Tom Boucher	636ec92107	refactor(#3185): phase enumeration has one owner and a decidable scope (#3222) ... * test(#3185): failing-first phase-enumeration single-owner suite Covers the enumeration rows with direct code evidence: 999.* backlog dirs listed by progress/stats, the phase-0 sentinel divergence, the #1324 letter-prefixed-decimal negative space, and the destructive-path find — cmdPhasesClear carries a fifth sentinel copy (/^999(?:\.|$)/) that excludes 999 but not 0, so a 0-* directory roadmap.analyze preserves is deleted there. Also covers the pass-all degrade, which is where the defect actually lives: when the milestone window declares no phases the filter becomes a literal () => true and its heading-side sentinel exclusion is unreachable. A fixture carrying phase headings keeps the filter active and never reaches that path. Named for the derivation, not a module: the suite drives commands, phase, milestone, workstream-inventory and state, and both the phase and phase-locator buckets are already at the per-module test-file cap. Committed alone so the remote runner records the failure before the fix. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QELmgcSwcNBgbUs3kzJeqG * refactor(#3185): phase enumeration has one owner and a decidable scope Adds phase-locator.cts::listMilestonePhaseDirs as the single canonical owner of "which phase directories belong to the current milestone". It applies the milestone window AND the sentinel filter and returns a ScopedResult, so a caller can tell a genuinely-empty milestone from an enumeration that could not be scoped. The sentinel test now runs against DIRECTORY NAMES and is unconditional. getMilestonePhaseFilter excludes sentinels from its ROADMAP heading set, but degrades to a literal () => true pass-all predicate when that set is empty -- at which point the heading set is never consulted and its sentinel exclusion is unreachable exactly when it is needed. That degrade is the #3167 path, and it is why stats already used the filter and still listed backlog directories. The narrowing is sentinel-only: pass-all stays over-inclusive otherwise. Sentinel copies deleted, canonical isSentinelPhaseId adopted: - cmdRoadmapAnalyze's local closure (parseInt === 0 || === 999), 2 call sites - cmdPhasesClear's /^999(?:\.|$)/ -- the DESTRUCTIVE path, which excluded 999 but not 0, so a 0-* directory roadmap.analyze preserves was deleted cmdStats also seeded rows from ROADMAP headings with no sentinel filter, so a 999 heading produced a row with no directory; that seed is filtered now. cmdPhasesList routes only its ENUMERATION. --phase lookup searches the physical set (scoping it would report an out-of-window phase as not found) and --include-archived still merges archived dirs (they are by definition from other milestones). Both exempt by documented reason, never a file allowlist. Fixed inline, found while building: isDirInMilestone could not match a #1324 letter-prefixed-decimal directory (P0.0-foundation) to its own Phase P0.0 heading, so stats reported the phase with plans: 0 while its directory held plan files. Defers to phase-id's extractPhaseToken rather than widening a fourth bespoke regex; additive, so it can only admit directories. Refs #3180. Closes #3185. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QELmgcSwcNBgbUs3kzJeqG * refactor(#3185): route the last two enumeration re-derivations workstream-inventory countRoadmapPhases counted every `Phase` heading across the whole ROADMAP -- no window, no sentinel filter -- so it counted 999.* backlog and Phase 0 and spanned every milestone the document ever had. Its own caller already resolved a currentVersion and passed it to getMilestonePhaseFilter elsewhere in the same file; this was the sibling copy that never got the fix. state.cts phaseInventoryProvider enumerated phase dirs with its own /^(\d+)-(.+)$/ convention regex and neither filter, so a rebuilt STATE.md inventory carried backlog and sentinel directories as current-milestone phases. A non-COMPLETE enumeration scope now throws to the outer catch as a real scan failure rather than reporting a confident undercount, mirroring the per-phase scanPhasePlans contract beside it. Refs #3180 #3185. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QELmgcSwcNBgbUs3kzJeqG * refactor(#3185): consolidate 23 sentinel re-derivations onto one predicate The whole-repo drift guard (ADR-3180 Decision 4a, no file allowlist) found the sentinel rule re-implemented 23 times across 8 modules, in three regex variants plus four integer-comparison forms. Most tested 999 only, so Phase 0 slipped through them while roadmap.analyze and the engine-wide convention (#1580) both treat 0 and 999 alike. That disagreement is the defect class this epic removes. All 23 now call phase-id's isSentinelPhaseId (SENTINEL_RANGES [0,999]). Sites: init recommended-actions and backlog counts, milestone phase scan, the phase-lifecycle progress table, phase.cts used-number collection and the four renumber-on-remove guards, roadmap-parser's heading and bullet milestone counts, roadmap get-phase fallbacks, and state's heading denominator. Excluding Phase 0 at these sites is a deliberate behavior change and the point of the consolidation — several carried comments already saying 0 should be excluded while the literal beside them caught only 999. Adds scripts/lint-phase-enumeration-drift.cjs, wired into lint:ci. It scans the whole src/ tree with no file allowlist and reports both shapes: an independent phases-dir enumeration, and an independent sentinel literal. Exemptions are function-scoped with a written reason. The guard is comment-aware — its first pass flagged JSDoc and a comment documenting that the code below uses the canonical owner, which would have trained readers to exempt prose. Refs #3180 #3185. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QELmgcSwcNBgbUs3kzJeqG * refactor(#3185): resolve every phases-dir enumeration; drift guard reports zero Per-site triage of the 31 remaining whole-repo guard hits, applying the rule generalized from #3183's Amendment 1: a LOOKUP, DIAGNOSTIC, ARCHIVAL or MUTATION pass wants the physical set; only "which phases belong to this milestone" wants the scoped set. Routed (10): init new-milestone phase_dir_count, init milestone-op fallback count, init manager, init progress, milestone complete stats/dry-run/archive move, phase complete's next-phase scan, state update-progress, state frontmatter stats, and uat audit's active set. Exempt with a written function-scoped reason (never a file allowlist): the audit/UAT/verification sweeps that deliberately scan every directory to report gaps, phase create/insert/rename/renumber mutations, single-phase lookups, roadmap-upgrade's cross-milestone migration, cmdPhasesClear's whole-tree destructive pass, and the reads that list a phase dir's FILES rather than enumerating the phases dir at all. Latent defects fixed by the routing: sentinel directories leaked into cmdInitNewMilestone's phase_dir_count, cmdMilestoneComplete's stats, dry-run AND ARCHIVE MOVE, cmdStateUpdateProgress, buildStateFrontmatter and cmdAuditUat's active set — every one of those hand-rolled an isDirInMilestone filter with no sentinel exclusion, so `milestone complete` was archiving backlog directories. scripts/lint-phase-enumeration-drift.cjs now reports 0 re-derivations and npm run lint:ci is green. Refs #3180 #3185. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QELmgcSwcNBgbUs3kzJeqG * docs(#3185): document milestone-scoped enumeration and record ADR Amendment 3 Changeset fragment (Changed), CLI-TOOLS/COMMANDS/USER-GUIDE updates for the scoped output of progress, stats, phases list, phases clear and milestone complete, the CONTEXT.md Phase Locator glossary entry naming listMilestonePhaseDirs, and ADR-3180 Amendment 3. Amendment 3 records: the SCOPE contract held unchanged; the declared deviation from Decision 1's provisional signature (the window needs cwd/ws, which the locked roadmapContent parameter cannot supply); the copy count being a lower bound for the third consecutive phase (4 scoped vs 54 found); the load-bearing finding that the sentinel exclusion sat on the heading set and was unreachable under the pass-all degrade; the two destructive-path defects; and the generalized exemption rule. Refs #3180 #3185. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QELmgcSwcNBgbUs3kzJeqG * fix(#3185): wire scope to consumers; revert two wrong routings the suite caught Review + remote runner findings, all fixed: The three consumers computed the enumeration scope and threw it away, so TRUNCATED/UNSCOPED/UNREADABLE collapsed into the same output as COMPLETE -- reproducing this epic's own output-identical-failure defect one layer up. progress, stats and phases list now emit phase_scope (null on the phases list --phase lookup path, which performs no enumeration). Two routings were wrong and the suite proved it: roadmap-parser's two milestone phase-count scans are reverted to the 999-only literal. isSentinelPhaseId is BROADER than what it replaced: its legacy branch runs /^0*(\d+)/ over "00.1", which backtracks to capture 0, so it read #2554's decimal phase ids as sentinel milestone 0 and stopped counting them. state.cts phaseInventoryProvider is reverted to the physical disk scan. `state rebuild` is a RECONCILIATION pass -- scoping it made it throw on healthy trees whose fixture resolves no window, swallowed the raw readdirSync fault message #3057 B1 requires verbatim, and stopped it dropping orphan STATE.md rows, which is the job. Both are now function-scoped guard exemptions with written reasons, not silent reverts. This is the consolidation trap named in the epic: a canonical rule can cover MORE than the copy it replaces, and only real inputs show it. Adds phases list coverage, a scope-branch test, and a drift-guard unit suite; backports comment-awareness to the milestone-window and plan-count guards so all three siblings share one false-positive profile; names #3161 alongside #3167 in Amendment 3's subsumption record. Refs #3180 #3185. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QELmgcSwcNBgbUs3kzJeqG * fix(#3185): correct isSentinelPhaseId's decimal-zero misclassification An isolated security review caught this branch committing the epic's own sin: the over-broad predicate was worked around at ONE call site and left live at the destructive ones. isSentinelPhaseId's legacy branch ran /^0*(\d+)/, which backtracks so any id whose leading digit run is all zeros before a non-digit captures 0 -- "0.1", "00.1" and "0.2554" all read as sentinel milestone 0. Two pinned contracts disagree with that: #2554 requires "00.1" to be counted as a real phase, and the 999 icebox is a whole reserved milestone so "999.1" must stay sentinel. The rule is asymmetric and now says so explicitly: 999 is sentinel with or without a decimal part; 0 is sentinel only when bare. A decimal phase under either is a real phase for 0 and reserved for 999, because 999 reserves a MILESTONE while 0 reserves a PHASE. Fixing the owner lets the earlier workaround go: getMilestonePhaseFilter's two scans route through isSentinelPhaseId again and the guard exemption that existed only to accommodate the defect is deleted. The state.cts cmdStateRebuild exemption stays -- that one is a genuine reconciliation-wants-the-physical-set case. Also corrects tests/adr-612-bracket-grammar.test.cjs, which asserted isSentinelPhaseId('0.1') === true and so had encoded the defect as expected behavior. Refs #3180 #3185. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QELmgcSwcNBgbUs3kzJeqG * fix(#3185): keep isSentinelPhaseId's semantics — 0.x is layered, not wrong Reverts the previous commit. The remote suite failed six tests proving it wrong, and the reason is the sharpest finding of this phase. An isolated security review observed that isSentinelPhaseId reads 0.1 and 00.1 as sentinel milestone 0 and judged that a defect against #2554. Correcting the canonical predicate broke #2949. Both contracts are pinned and both are right, because they ask different questions: #2554 is this dir part of the current milestone's phase SET? -> count 00.1 #2949 must this phase COMPLETE before the milestone closes? -> 0.x sentinel No single global predicate answers both. isSentinelPhaseId keeps its semantics (0.x IS a sentinel, #2949), and the milestone-window layer keeps a narrower 999-only rule (#2554) as a function-scoped guard exemption with a written reason — not a second silent copy. That corrects how Decision 1 reads: "one owner per derivation" governs who computes an answer, not how many questions share it. An over-broad canonical rule is as much a defect as a divergent copy and fails worse, because it looks like consolidation. Recorded in Amendment 3 as the lesson for Phases 4 and 5. Where a review's inference about intent conflicts with a pinned contract, the pinned contract wins; the finding is adjudicated, not fixed. The boundary tables in the enumeration suite are corrected to assert 0.x IS a sentinel, with the layering explained. Refs #3180 #3185. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QELmgcSwcNBgbUs3kzJeqG * chore(#3185): set changeset fragment pr to 3222 Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01QELmgcSwcNBgbUs3kzJeqG --------- Co-authored-by: sim <sim@local> Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-08 14:22:10 -04:00
Tom Boucher	342590c70e	refactor(#3184): milestone windowing has one owner and a decidable failure signal (#3209) ... * test(#3184): failing-first milestone-window single-owner suite Covers the 50 input classes in the phase test matrix: scope classification (genuinely-empty vs truncated vs unscoped vs unreadable), the section-end owner's level boundaries, consumer-output identity per ADR-3180 Decision 4(c), the milestone.complete refusal with negative proof that no directory moved, the version-token boundary defect, drift-guard behavior, and three fast-check properties over document-shaped generators. Committed alone so the remote runner records the failure before the fix lands. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015kfkRFNUESoBspUYcAQaT3 * refactor(#3184): milestone windowing routes through one owner Three copies of the milestone section-end walk lived in roadmap-parser.cts — two distinct computeSectionEnd function nodes plus an inline third in getMilestonePhaseFilter's versionOverride branch. computeMilestoneSectionEnd is now the sole owner and the other two are deleted, not kept in sync by comment. The whole-repo drift guard found what the epic did not: state.cts held three more re-derivations of the same vocabulary — two byte-identical milestone bounding checks carrying a defect neither reported copy has (no boundary after the version token, so v2.0 matched inside v2.0.1), and a milestone-sectioning predicate. All three route through the owner now. A composition-level duplicate appeared inside this change's own first pass: getMilestonePhaseFilter and cmdMilestoneComplete each re-assembled a window out of the owner's primitives, and had already diverged on whether to skip a closed milestone heading. sliceMilestoneWindow is the one composition. Windows now carry the ADR-3180 SCOPE discriminator, so a truncated window is distinguishable from a genuinely empty milestone — those were output-identical, which is the whole failure class. roadmap analyze emits it (#3165), and milestone complete refuses to archive on anything but COMPLETE rather than pass-all moving every phase directory on disk (#3166). The pass-all degrade is preserved where its premise holds: making the filter deny-all would trade a silent over-inclusive answer for a silent under-inclusive one on the read paths that count with it. extractCurrentMilestone keeps its signature — 200+ affected symbols across 41 files and 25 process flows — and is a one-line wrapper over the scoped owner. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015kfkRFNUESoBspUYcAQaT3 * fix(#3184): fence-aware phase detection and one heading-selection owner Review fixes from the two orthogonal passes. The blocker: hasPhaseEntries matched ATX phase headings fence-aware via tokenizeHeadings but tested the #2199 bullet form against un-stripped markdown, so a fenced EXAMPLE of the bullet syntax counted as a real phase. A genuinely empty milestone then classified TRUNCATED and milestone complete refused a legitimate archive — a false positive in the destructive direction, worse than the defect this phase set out to fix. Both that path and getMilestonePhaseFilter own pre-existing bullet scan now run on stripFencedCode, since leaving one meant the owner file gave two different answers to the same question. The selection rule — locate, prefer the non-closed heading, else the first — had been written three more times inside the file whose thesis is single ownership. selectMilestoneHeading owns it; all three sites route through it. The copies were behaviorally identical, so this is de-duplication with no observable change, verified by probing that all three paths select the same heading. roadmap analyze emitting a scope no consumer read left #3165's actual symptom alive, so Route 0 in next.md now treats a non-complete scope as scan-failed rather than as a clean empty scan, and the ADR amendment no longer overstates what shipped. Also: the scope refusal moved above the archive-directory create, so a refusal leaves nothing on disk; the versionOverride comment names all four consumers; COMMANDS.md documents the new guard beside its sibling. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015kfkRFNUESoBspUYcAQaT3 * test(#2658): exclude the changelog from the malformed-path scan The gate walks every emitted .md/.js/.cjs file in an installed tree and asserts none contains `.claude/.trae/rules` or `.trae/.trae/rules`. CHANGELOG.md ships into that tree, and its #2658 entry quotes both malformed paths while describing the fix that removed them — so the release note documenting the fix trips the fix's own regression test. Red on next before this branch. The installer is correct: a probe over a real --trae --local install found 621 emitted files, exactly one hit, and it was gsd-core/CHANGELOG.md. The scan scope was the defect, not the product. Excluded by exact relative path rather than by loosening the patterns or skipping all markdown — the emitted agent and command markdown is precisely what #2658 was about, so the gate stays strong everywhere it matters. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015kfkRFNUESoBspUYcAQaT3 * test(#3184): regenerate install-tree fixtures for the shared drift scanner scripts/lib/ ships in the npm package and installer, so extracting the shared tree-walk into scripts/lib/drift-scan.cjs adds one path to every runtime's install tree. Regenerated via npm run gen:install-tree; the delta is exactly that one path per fixture. The two drift guards themselves do not ship (scripts/lint-*.cjs is excluded), so only the extracted library moves. This matches the existing scripts/lib/allowlist-ratchet.cjs precedent, which is likewise a lint-only helper carried in the shipped tree. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015kfkRFNUESoBspUYcAQaT3 * fix(#3184): restore the #730 sub-milestone boundary and narrow the refusal The remote runner caught two regressions this branch introduced. Both were mine, and neither review pass found them — only running the existing suite did. The version-token boundary. I replaced locateMilestoneHeadings' \b with (?![\w.-]), reasoning that v2.0 matching inside v2.0.1 was the same defect #2562 fixed in isMilestoneShippedInRoadmap. It is not the same question. A milestone state of v8.0 legitimately selects the '## v8.0-B' sub-milestone section over a closed v8.0-A sibling (#730), and \b is what allows it while the stricter boundary forbids it — nine tests in roadmap-phase-fallback said so. Reverted to \b; the state.cts consolidation is now a straight merge with no behavior change, and the v2.0/v2.0.1 ambiguity is left exactly as it was. The ADR amendment and the design doc no longer claim otherwise. The refusal scope. I refused whenever the window was not COMPLETE, but #3166 is about the TRUNCATED window specifically — the heading is found and the section closes before the phase region, so pass-all archives everything. UNREADABLE and UNSCOPED are pre-existing, legitimately handled states, and refusing on them broke 'handles missing ROADMAP.md gracefully' and three archive tests. Narrowed to TRUNCATED; docs corrected to match. One of the new tests was also wrong: its fixture gave the shipped and current milestones' phases the same numeric id, and the filter matches on that id, so it could not have distinguished the two windows. Fixture corrected to exercise what it claims to. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015kfkRFNUESoBspUYcAQaT3 * fix(#3184): enumerate drift-scan.cjs for uninstall The installer copies scripts/lib/ wholesale, but uninstall removes an explicit set — deliberately, so a user's own helpers in that directory survive. The extracted drift-scan.cjs was copied in and never enumerated, so it outlived uninstall, left the directory non-empty, and the rmdir that follows failed. Added to GSD_SCRIPTS_LIB_FILES, following allowlist-ratchet.cjs, which is likewise a lint-only helper that ships there and is enumerated. Verified with a real install-then-uninstall into a temp target: scripts/lib/ held exactly the three GSD files and was gone afterwards. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015kfkRFNUESoBspUYcAQaT3 * test(#3184): assert install and uninstall agree on scripts/lib and scripts/changeset Found while shipping this phase, and fixed here rather than noted. install() copies scripts/lib/ and scripts/changeset/ into the target WHOLESALE — the comment at the copy site literally says "and any future lib helpers". uninstall() removes them by hardcoded enumeration, deliberately, so a user's own helpers in those directories survive. A wholesale writer paired with an enumerated remover cannot stay in sync by construction: any file added to either directory ships to every user and is then orphaned in their repo forever, since it survives uninstall, leaves the directory non-empty, and the rmdir that follows fails. Nothing reported this. 31,225 tests were green over it. That is the same divergence class this epic exists to delete, sitting in the installer, so it gets the same remedy CLAUDE.md prescribes for it: a parity assertion that fails the moment the two surfaces disagree. The test compares each directory's real contents against its enumeration and names the offending file plus the constant to add it to. Both enumerations are hoisted to module scope and exported, so the test asserts on the actual arrays rather than pattern-matching the installer's source — no allow-test-rule annotation needed. Proven non-vacuous both ways: empty diff on the current tree, correct report when an unenumerated file is injected. scripts/changeset/ turned out to carry the identical defect and is covered too. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015kfkRFNUESoBspUYcAQaT3 * chore(#3184): backfill changeset PR number Also narrows the wording to match the shipped behavior: the refusal fires on a truncated window specifically, not on any non-complete scope. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_015kfkRFNUESoBspUYcAQaT3 --------- Co-authored-by: sim <sim@local> Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-08 09:50:35 -04:00
Tom Boucher	343835facc	refactor(#3183): route live-plan counting through scanPhasePlans (#3199) ... * refactor(#3183): route live-plan counting through scanPhasePlans scanPhasePlans becomes the sole owner of the live-plan derivation. Twenty-one independent re-derivations across seven modules now route through it, and scripts/lint-plan-count-drift.cjs reports zero, scanning the whole repo rather than an allowlist (ADR-3180 Decision 4a). The epic scoped this at three copies. A whole-repo guard found twenty-six sites across nine files, so Phase 1 absorbs every live-plan re-derivation and Phase 3 narrows to window plus sentinel enumeration. Two sites are exempt with a documented reason rather than a bare allowlist: audit.cts scans one quick task's own directory for a single completion record, and gsd2-import.cts reads a foreign GSD-2 tasks/ layout during a one-time import. Neither is a phase directory. scanPhasePlans gains allPlanFiles (pre-supersession) alongside planFiles so one owner answers both questions: verify.cts's numbering-gap check wants every plan on disk, its pairing check wants the live set. Both fields are additive. Highest-severity fix: cmdPhasePlanIndex, which feeds execute-phase wave scheduling, was scheduling status:superseded plans into waves and reporting zero plans for the post-#3139 nested layout. filterPlanFiles and filterSummaryFiles are deleted; getPhaseFileStats orphaned them and only their own tests still called them. New leaf module src/planning-scope.cts carries the frozen SCOPE discriminator, with its six-gate ripple closed: gitignore, inventory manifest, INVENTORY.md and the CONTEXT.md glossary. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_012qYy4ZWif3sscQyMsup6Ma * docs(#3183): amend ADR-3180 for the Phase 1/3 boundary re-slice The contract held; the phase boundary did not. The whole-repo drift guard found 26 re-derivations across 9 files against the epic's estimate of 3, and cmdProgressRender re-derives both enumeration and plan counting on adjacent lines, so DW4 was unsatisfiable within Phase 1's original file scope. Records the amended scope, scanPhasePlans's new allPlanFiles field, findOrphanSummaries, the two documented exemptions, the re-derived Tier-2 table, and the describeNonCanonicalPlans trap for later phases. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_012qYy4ZWif3sscQyMsup6Ma * fix(#3183): complete the canonical pairing rule and gate the naming diagnostic The remote runner went red with 13 deterministic failures on both lanes, and they were right: replacing verify.cts's canonicalPlanStem pairing with summaryCandidates dropped a case the bespoke rule covered. A plan carrying a descriptive slug after its id (68-01-scaffolding-PLAN.md) pairs with its canonical-stem summary (68-01-SUMMARY.md), and summaryCandidates generated no such candidate, so the plan read unsummarized. The fix is to complete the one rule rather than restore a second: summaryCandidates gains a canonical-id candidate, narrowed to fire only when an id pair was actually extracted. countMatchedSummaries, findUnsummarizedPlans and findOrphanSummaries all inherit it. The two-plans-one-summary collision behaviour of the original rule is preserved deliberately and documented in place. Second defect, independently root-caused while verifying: routing the #2893 naming diagnostic through scanPhasePlans exposed it to the loose /PLAN/i fallback, which is correct for counting and wrong for a naming check — a non-canonically-named file was accepted as a valid plan and the diagnostic went silent. cmdPhasesList, cmdFindPhase and cmdPhasePlanIndex now intersect with a strict isCanonicalPlanFile predicate before reporting names. Same class as the describeNonCanonicalPlans trap already recorded in ADR-3180: a question about file naming wants the physical, strictly-matched set; only a question about outstanding work wants the live set. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_012qYy4ZWif3sscQyMsup6Ma * chore(#3183): register planning-scope.cjs in the eslint migration list tests/repo-invariants.test.cjs asserts every bin/lib/*.cjs is linted xor ignored per its ADR-457 migration state. The new planning-scope module closed five of the six .cts ripple gates - gitignore, inventory manifest, INVENTORY.md and the CONTEXT.md glossary - but not eslint, because that one is enforced by a test rather than by lint:ci, so the local pipeline stayed green while it was missing. Generated from src/planning-scope.cts, so the .cjs is ignored and the .cts is linted, matching every other migrated module. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_012qYy4ZWif3sscQyMsup6Ma * fix(#3183): replace the plan-count drift detector with a literal tokenizer CodeQL reported 4 high-severity js/redos alerts on REGEX_LITERAL_MD_RE, the backtracking regex that finds "a regex literal mentioning PLAN/SUMMARY and an escaped \.md". Five review rounds found it had two defects, not one: - EXPONENTIAL, then CUBIC. Its "any char" atom `(?:\\.|[^/\r\n])` let a `\.` pair be consumed either as one escape or as two class characters, which is exponential backtracking: 27,464ms on `"/\.mdplan" + "\.".repeat(28) + "X"`. Excluding `\` from the class killed that but left a cubic path — 23ms at N=200, 172ms at N=400, 1362ms at N=800 on `"/" + "PLAN\.md".repeat(N)` with no closing `/`. This guard is the last stage of `npm run lint:ci`, which CI runs on fork pull requests, so a crafted src/*.cts could stall the job. - A DETECTION HOLE. A character class holding a bare, unescaped `/` — e.g. `/SUMMARY[^/]*\.md$/`, an ordinary path-excluding filter — terminated the literal at that `/`, so the scan never reached `\.md` and the guard missed it entirely. (Classes holding an ESCAPED `\/` were already matched; the tests cover those separately as parity, not as regressions.) Both defects have one root cause: regex-literal grammar — `\x` escapes, and `/` inside `[...]` not terminating — is not expressible in a backtracking regex. So the detector is now a tokenizer, not a regex. readRegexLiteralAt reads the literal at a given `/` in a single left-to-right pass with no backtracking, treating escapes as two-character units and suppressing the `/` terminator inside a character class. findRegexLiteralMdMatch restarts it at every `/` on the line, preserving the old "find anywhere" behaviour; MAX_REGEX_LITERAL_LEN (400) bounds each read — including the trailing-flag scan — which keeps the whole-line cost linear. Results: cubic shape flat at 0.06-0.39ms out to N=3200 (25KB), exponential shape 0.01ms at 28 reps and 0.00ms at 64, and the bare-`/` class shapes are now caught. Differential against the old regex over 28,474 lines (those matching FILENAME_TEST_RE but not PLAN_SUMMARY_LITERAL_RE, across src/tests/scripts/ gsd-core/bin/eslint-rules, excluding 265 lines with >6 backslashes on which the old regex hangs): 6 differences, all the tokenizer returning the fuller or newly-correct literal, 0 old-only misses. The `\.md` token stays case-insensitive, matching the `/i` the old regex carried. Also closes three holes in the same new file: - walk() tested entry.isFile(), false for a symlink, so a symlinked src/*.cts was silently unscanned — an evasion of a guard whose stated principle (ADR-3180 Decision 4a) is whole-repo discovery with no allowlist. It now resolves symlinks, but confined: file links must resolve inside the repo root, directory links inside the scanned dir itself. Every sibling drift guard in scripts/ uses the Dirent classification and never follows links, so following them unconfined would have made this the only linter able to read outside the tree — on fork PRs an arbitrary out-of-repo read whose matched fragments reach a public CI log. The narrower directory rule additionally stops `src/up -> ..` from sweeping the whole repo, and the skip list is now checked against resolved paths so `src/g -> ../.git` cannot reach .git/** or node_modules/**. Real paths are de-duplicated and files reported canonically, so a symlink alias cannot shift which FUNCTION_SCOPED_EXEMPTIONS key applies. - Both the reported fragment and the reported FILE PATH are attacker- controlled source text written straight to a CI log, and git permits control bytes in a filename. Both are now escaped — C0/C1/DEL plus the bidi and zero-width controls — so a crafted literal or filename cannot recolour the log, overwrite a line with CR, or fabricate a line that looks like this guard's own success output. Regression coverage in tests/plan-count-single-owner.test.cjs: a child-process probe over both pathological shapes (catastrophic backtracking is synchronous and would freeze the suite rather than fail one test), the bare-`/` class shapes verified to fail against the parent-commit blob, root-confinement tests covering the outside-file, outside-directory, cycle, broken-link and duplicate cases, direct isInsideRoot coverage including the sibling-prefix case that a bare startsWith would let through, sanitizeForReport coverage, and limit-1/limit/limit+1 coverage of MAX_REGEX_LITERAL_LEN derived from the exported constant. The earlier structural assertion was dropped — it checked for the substring `[^/`, which respelling the class as `[^\r\n/]` defeats while staying exponential. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_012qYy4ZWif3sscQyMsup6Ma * chore(#3183): backfill changeset PR number Restores b77931869, which a force-push during the ReDoS remediation dropped. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_012qYy4ZWif3sscQyMsup6Ma --------- Co-authored-by: sim <sim@local> Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>	2026-08-08 01:20:55 -04:00