bf8905fcc98bea8303965a5b60e0060d3196b5ad
41 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
sim
|
bf8905fcc9 |
fix(#4012): a hang never emits the events I was listening for
The init marker settled it. The diagnostic reported "THE REPORTER LOADED BUT RECORDED NO TEST EVENTS — the events file contains only the reporter's own reporter:init marker", which refutes the reporter-never-loaded hypothesis and leaves exactly one explanation. The runner spawns a child process per test file and surfaces a subtest's test:start / test:pass / test:fail to the parent's reporter only once the child REPORTS that test — which happens when it completes. The fixture hangs forever, so it never completes, so it never reports. I had recorded exactly those three event types: the precise set that a hang guarantees you will never see. The feature could not have worked for the case it was built for. test:enqueue and test:dequeue are emitted by the runner as it queues and begins each file, independent of anything inside finishing. test:dequeue is what actually means "in flight", and it is now the primary signal, with test:start kept as a secondary one. A file is in flight when it has been dequeued and has no terminal event. The four branches now describe states that are all real: the events file absent (reporter never loaded); the init marker alone (the runner dequeued nothing at all — genuinely surprising now rather than the expected outcome); everything dequeued and terminated (the files finished and the process hung afterwards, a handle leak); and one or more dequeued-but-unterminated files, named, which is the case this whole feature exists to report. Verified against the exact shape the real hang produces, by executing analyzeChunkEvents on a synthetic events file: init + enqueue + dequeue with no terminal event reports hangs.test.cjs as in flight, and appending a test:pass clears it. Four more unit tests cover the ordering and multi-file cases with no subprocess, so this logic is now checkable without a runner round-trip — which matters, because every defect in this feature so far was visible only remotely. T1 is untouched and should now pass for the right reason. Verification runs on the remote runner. Refs #4012 |
||
|
sim
|
444137e63a |
fix(#4012): make the artifact say whether the reporter ever loaded
Down to 3 remote failures, all one chain. The explicit no-events reporting is working — the diagnostic now states the events file does not exist, instead of silently printing the generic message. But it then ASSERTED a cause: "the child was killed before the reporter wrote even one event (process/spawn startup stall, not a test hang)". That was a guess dressed as a finding, and the fixture contradicts it: it starts a real test, so test:start should fire in milliseconds against a 2000ms budget. Two hypotheses remained and I could not separate them locally, because the local test runner is hook-blocked here: either the custom reporter never LOADS in the child, or it loads and no event reaches it before the SIGKILL. Rather than guess a third time, the artifact now answers it. The reporter appends a reporter:init line as its first action, before consuming anything, so the file's contents discriminate: absent means the reporter never loaded; init-only means it loaded and saw no test events; init plus events means it works. The diagnostic has a branch for each and, where the cause is genuinely unresolved, names both possibilities instead of picking one. Also passes the reporter as a file:// URL via pathToFileURL. Node documents the --test-reporter value as an import()-style specifier, and a bare absolute path is not a portable one — notably on Windows. That is a correctness fix whichever hypothesis holds, and it is a live candidate for the first. FIXED_OVERHEAD is derived by reducing over the actual argv strings, so the longer URL is accounted automatically. Verified by execution, not assumption: composing the reporter against an EMPTY event stream writes exactly one line, the init marker. That is the whole point of the marker, so it is pinned by a test rather than left to inspection. T1 stays red and untouched. Verification runs on the remote runner. Refs #4012 |
||
|
sim
|
7f2af28639 |
fix(#4012): the reporter sink must be a regular file, not devNull
Third failure on this feature, and this one broke everything rather than just the diagnostic: 43 failures across every run-tests.cjs invocation. Error: EINVAL: invalid argument, fsync Emitted 'error' event on WriteStream instance Node opens a WriteStream for a --test-reporter-destination and FSYNCS it on close. fsync on /dev/null is EINVAL — it is a character device, not a regular file. So os.devNull is not a usable reporter destination at all, and every chunk crashed on exit. The sink only ever needed to be a regular file that stays empty, since the reporter writes its real output through appendFileSync to the path in GSD_RUN_TESTS_EVENTS_FILE. It is now one fixed file inside the existing events dir, pre-created rather than relying on the stream's create-on-open, and left empty by design. One sink for the whole run, not per chunk, so its path length stays constant — reporterOverhead feeds FIXED_OVERHEAD, which is computed once before chunking, and a variable-length path would silently mis-account the Windows argv ceiling. The comment that named devNull now says why the destination must be a regular file, so this does not get re-optimized back into the same crash. Reaching for devNull was the mistake: it looks like the obviously correct way to discard output, and it is, for a pipe or an fd — but not for something Node is going to fsync. Each of the three failures on this feature was a different edge of the same assumption, that a reporter destination behaves like ordinary output. The regression test asserts the closest externally observable consequence — a normal run must not surface the EINVAL/fsync text. The argv construction lives inside main() with no exported seam, and the sink is swept before a test could stat it; adding a seam purely to assert that is left out rather than reshaping production code for the test. Stated plainly rather than implied. The failing T1 is untouched and still red. Verification runs on the remote runner. Refs #4012 |
||
|
sim
|
0abd137ec7 |
fix(#4012): the events reporter has to survive SIGKILL
The remote run proved the instrumentation did not work. Timing landed — "chunk 1/1 was killed after 2006ms" — but the in-flight-file naming produced nothing and fell through to the pre-existing generic message. The feature I wrote to diagnose a kill was itself destroyed by the kill. Root cause, confirmed rather than assumed. The reporter yielded strings, which node pipes into the --test-reporter-destination WriteStream. That stream BUFFERS. execFileSync's timeout sends SIGKILL, which is uncatchable and gives nothing a chance to flush, so the events sat in a buffer that died with the child. The parent's own timer reported correctly because it lives in the parent — which is exactly why half the feature looked fine. The reporter now writes each event with fs.appendFileSync, unbuffered and durable at the moment it happens, to a path passed through GSD_RUN_TESTS_EVENTS_FILE. Env vars do not count toward the Windows 32,767-char argv ceiling, so moving the path out of argv also REDUCES FIXED_OVERHEAD; the accounting moved with it rather than being left stale. The destination is now a fixed devNull sink that stays empty by design. Silence was the reason this was invisible for a whole run. Failing to read the events file now says so explicitly, and distinguishes a file that could not be read at all from one that exists but is empty — the generic fallback firing quietly is what let a broken feature look like a working one. A write is unbuffered but not atomic, so a kill can still interleave a partial line; the reader tolerates exactly one unparsable trailing line and reports the complete ones before it. The failing T1 was left red and untouched rather than weakened to pass. Three new unit tests cover the reader directly, with no subprocess, so the parsing half is verifiable without a full runner pass: missing file, existing-but-empty file, and a truncated final line. Also adds ndjson-reporter.cjs to GSD_SCRIPTS_LIB_FILES in bin/install.js — scripts/lib/ ships, and omitting it meant the file would install everywhere and orphan on uninstall. That single omission caused 4 of the 7 remote failures. Verification runs on the remote runner. Refs #4012 |
||
|
sim
|
8497833a15 |
fix(#4012): a killed chunk now names the file that was hanging
The per-chunk timeout fired correctly but reported almost nothing, so every diagnosis cost a CI round-trip. run-tests.cjs logged chunk START only — no timestamp, no duration, no end line — then on a kill printed all ~55 basenames and asked the operator to work out whether output kept flowing (slow) or stopped early (hang). It could not name the in-flight file because the child is spawned with stdio inherit, deliberately, per #3597/#1051. Three additions. Per-chunk elapsed timing on every path, not just failures, so drift toward the cap is visible before it becomes a kill. Every timing number in the investigation behind this had to be reconstructed by hand from GitHub log timestamps. A second, machine-readable reporter running ALONGSIDE the human one, writing NDJSON to its own file. On a kill that file is read back and the files with a test:start and no matching completion are named, with the staleness of the last event, so "stopped 480s ago at X" reads differently from "still emitting at kill". stdio stays inherit and nothing is piped or tee'd — the maxBuffer and live-output risks that shaped the original design are untouched. Ranking of the killed chunk's files by known weight, flagging any absent from tests/test-timings.json, since an unweighted file is an unknown quantity. Two details that are correct rather than lucky. Passing --test-reporter at all replaces node's implicit default, so the human reporter is now named explicitly and reproduces node's own selection (spec on a TTY, tap otherwise) — visible output is unchanged. And the destination path's chunk index is zero-padded to a fixed width because FIXED_OVERHEAD is computed ONCE before chunking; a variable-length path would have silently mis-accounted the Windows 32,767-char argv ceiling and reintroduced #3597. The reporter flags are added to FIXED_OVERHEAD exactly as --test-force-exit is. The multi-reporter pairing and the stream.compose reporter contract were confirmed against Node's v24 documentation, not recalled — the first draft carried them as an unverified assumption and said so. Also corrects a stale comment claiming the 600s cap sits "below the 20m job cap". The lane is sharded 3x at timeout-minutes: 45; the windows shards were at 19m when chunk 1/5 was killed on |
||
|
Tom Boucher
|
dc3c81e93d |
chore(#3212): src/pattern.cts is the sole owner of runtime-value regex construction — Phase 1 (#3416)
* test(#3412): failing-first suite for the pattern-construction seam Phase 1 of epic #3212 (ADR-3212 §1/§2/§7). Tests only — src/pattern.cts and eslint-rules/no-adhoc-regex-escape.cjs do not exist yet, so both suites fail with MODULE_NOT_FOUND, which is the intended RED. Locks the measured behavior rather than the assumed behavior: RegExp.escape hex-escapes the leading character of nearly every string ("abc" -> "\x61bc"), so the suite asserts match-equivalence against an inlined historical oracle (the implementation being deleted) rather than byte-equivalence of pattern text — 200 seeded fast-check runs plus a fixed corpus, 0 mismatches. Also locks the latent character-class range bug this phase fixes as a side effect: a hyphen-bearing value interpolated into [...] currently forms a real range and matches an unintended character; post-migration it must not. * chore(#3412): src/pattern.cts owns runtime-value regex construction Phase 1 of epic #3212 (ADR-3212 §1/§2/§6/§7). Adds the pattern seam delegating to the built-in RegExp.escape, deletes every hand-rolled copy, and raises the Node floor to the Active LTS line. The census was low, three times over. ADR-3212 counted 10 copies; a graph query found 12; the new lint rule — once live — found 27 more. The difference is that the census counted named helper FUNCTIONS while the rule counts the escape SHAPE, so inline .replace(<class>, '\$&') copies were never in scope. ADR §1's actual requirement is that no module outside the seam escapes a value for regex use, so all of them are, and CLAUDE.md's no-defer rule makes them this change's work. Fourth consecutive epic here whose copy count was low — the argument for ADR-3180 Amendment 3's "state N found by the guard" rule. Also corrected mid-implementation: the survey reported phase-id.cts's escapeRegex had 0 external importers. It had 8 production importers, making its removal a public-surface change to an ADR-2121-owned module and requiring an update to that ADR's locked-surface test. Blast radius revised Medium-High -> High. RegExp.escape is match-equivalent but NOT text-equivalent: it hex-escapes the leading char of nearly every string ("abc" -> "\x61bc"). Equivalence is proven by a seeded fast-check property test against the deleted implementation as oracle. It also fixes a latent bug: a hyphen-bearing value interpolated into a character class previously formed a real range and matched an unintended character. Node floor 22 -> 24 (RegExp.escape is Node 24+), across engines, .nvmrc, package-lock, 9 CI matrix entries, and 5 docs. The aggregate `required-tests` context is unchanged and no job was added or removed, so branch protection cannot be orphaned by the dropped lanes. Enforced by eslint-rules/no-adhoc-regex-escape.cjs (shape-matched, with structural provenance for reviewed pattern-fragment constants rather than a name heuristic) plus a whole-tree companion guard covering the directories ESLint's globs miss. * fix(#3412): close the _SOURCE guard evasion, correct two false claims Three findings from the orthogonal review pass, all fixed. 1. The ESLint rule's `_SOURCE` provenance fallback was pure identifier- name matching with no binding check, so `new RegExp(userInput_SOURCE)` — a function parameter — sailed past the guard. That is the same rename-evasion class issue #3410 documents, reopened by the very fallback meant to complement the structural check. Now bound to the identifier's actual binding kind: import, require-derived const, or module-scope const; parameters, `let`/`var`, and unresolvable bindings fail closed. Four RuleTester cases cover the evasion and prove the legitimate cross-module case still passes. 2. src/pattern.cts's own header carried the stale pre-correction counts (12 copies / 17 call sites) while CONTEXT.md and the design doc carried the corrected ones (~39 / ~44) — a self-contradiction inside the PR whose entire purpose is deleting divergent copies. Rewritten, preserving the durable lesson: a named-function census cannot see inline copies; only a shape-matching guard can. 3. The claim that all deleted copies threw TypeError on non-string was false. phase-id.cts's copy — the one with 8 external importers — did String(value).replace(...) and never threw. The seam's locked signature does not coerce, so this is a real, now-disclosed behavior change rather than the pure preservation the tests asserted. Audited all 32 invocations across the 8 importers and 6 in-file callers: every one is safe by construction (upstream truthy guard or a string-producing derivation), verified by runtime probe against the compiled modules rather than by TS compilation, which cannot see a runtime undefined. Corrected the false claim in both the test comment and the design doc, and added it to Known limits. * docs(#3412): add Changed changeset for the Node 24 floor The only user-visible break in this phase. The escape-behavior change is internal and match-equivalent, so it carries no user-facing note. * fix(#3412): resolve the seam's require graph in script fixtures and packaging Checkpoint 2 came back red with 90 failures on the node24 lane. Three distinct defects, all introduced by routing scripts/ through the new pattern seam, none reproducible by any local gate: 1. ~82 failures — tests/adr-index-gate.test.cjs and tests/removed-but-needed-lint.test.cjs copy a scripts/*.cjs into an mkdtemp fixture and spawn it there (necessary: those scripts resolve their scan root from __dirname/.., so running the real script would scan the real repo). Each harness hand-listed the dependencies to copy alongside. Adding require('../gsd-core/bin/lib/pattern.cjs') to gen-adr-index.cjs made both lists silently incomplete -> MODULE_NOT_FOUND, plus 17 downstream 'did not emit parseable JSON' failures from the same crash. Fixed as a class, not an instance: new tests/helpers/copy-script- fixture.cjs walks a script's transitive static relative-require graph and copies it, so dependencies are derived and never re-declared. It throws (naming the unbuilt artifact) instead of letting the child die with a bare MODULE_NOT_FOUND. Verified for all four seam-consuming scripts: gen-adr-index, lint-removed-but-needed, gen-loop-host- contract, sync-runtime-launcher. 2. 2 failures — scripts/ ships wholesale but eslint-rules/ does not, so the new scripts/lint-no-adhoc-regex-escape.cjs would be MODULE_NOT_FOUND in a published install (#2858 guard). Excluded from the tarball, matching the existing precedent for gen-emitted- baseline.cjs, which is excluded for the identical reason, and locked with a test modeled on that one. Confirmed against a real npm pack: 890 files, 0 from eslint-rules/, and gsd-core/bin/lib/pattern.cjs present (so the other four scripts' requires are legitimate). 3. 6 failures — tests/phase-id.test.cjs asserted the literal escaped source text ('0*29', 'PROJ-42'). RegExp.escape is match-equivalent to the retired hand-rolled escaper but NOT text-equivalent: it hex- escapes the leading character and all hyphens ('0*\x329', '\x50ROJ\x2d42'). Verified NOT a behavior change — 576 match decisions across all three real interpolation prefixes, zero divergence. Those tests now compile each source into the same heading regex src/roadmap.cts's searchPhaseInContent builds and assert what matches and what does not, including the 'i'-flag canonicalization the hex escape has to preserve. Re-pinning the new literals would have rebuilt the same brittleness one layer down. Adds a test for the property the escape exists for: a dot in '1.2' must not act as a wildcard. Also shares one definition of 'a require' between the packaging guard and the fixture copier, so the two cannot disagree about what they scan. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(#3412): refuse to copy a fixture dependency outside the fixture root copyScriptWithDeps resolved each relative require and joined the repo-relative result onto fixtureRoot. A require resolving OUTSIDE the repo yields a '../'-prefixed relative path, so path.join climbed out of the fixture and wrote into the surrounding temp dir (verified: repoRoot=/repo + depAbs=/etc/passwd wrote /tmp/etc/passwd). No script in the tree does this today, so this closes an available escape rather than an active one. Refuses via the existing unresolved- require path so the failure names the offending specifier. Covered by a negative proof that the guard fires and that nothing lands outside the fixture. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(#3412): parse requires instead of pattern-matching them; restore the foreign-prefix contract Applies all findings from the second orthogonal review round, re-run because real code changed after round 1. HIGH (security) — extractRequires stripped BLOCK comments before LINE comments, so a '//' comment containing '/*' opened a phantom block comment, and a '//' inside a string literal truncated the line. Both hid real requires: 'const u="http://x"; require("./real.cjs")' returned [], and four real requires in gsd-core/bin/gsd-tools.cjs were invisible. Replaced with a real AST parse via espree. This is ADR-3212's own Decision 4 — tokenizer-first for stateful grammars — applied to the case it describes; comment/string/regex nesting is exactly such a grammar, which is why the regex version was wrong. The function was moved byte-identical out of the #2858 packaging guard, so the bug PRE-DATES this branch and has been a live blind spot there: a shipped script could have required an unshipped path undetected. Fixing it makes that guard strictly stronger than on next. espree is promoted from a transitive eslint dependency to an explicit devDependency rather than relying on hoisting. The script parse attempt sets ecmaFeatures.globalReturn because Node wraps CommonJS bodies in a function, making a top-level return legal — scripts/check-coverage-gate .cjs relies on it, and without the flag the guard throws on a file it is supposed to scan. Verified 0 unparseable across all 324 .cjs/.js under scripts/, bin/, and gsd-core/bin/, and 0 new violations against a real npm pack, so the exact extractor does not newly fail the guard. MEDIUM (security) — the repo-containment check guarded dependencies but not the entry path. One escapesContainment predicate now guards both. LOW (security) — containment was lexical while fs follows symlinks, and a directory symlink could mint a fresh dedupe key per level. realpath now resolves both repoRoot and each dependency before the decision, and the realpath-derived path is the dedupe key. Destination layout still uses the original repo-relative path, so copied trees are unchanged. MAJOR (standards) — the round-1 behavioral rewrite of phase-id tests lost the foreign-prefix contract: every assertion was satisfied by an impl returning [A-Z]+\x2d42, i.e. ANY project code — the exact #3599 bug class the exact-source prevents. The literal assertions it replaced were catching this. Now asserts the compiled regex REJECTS a different prefix with the same number. MAJOR (standards) — the test hand-duplicated production's heading regex with no parity guard (CLAUDE.md's 'Generative Fix Divergence'). Removed the parallel surface instead of policing it: src/roadmap.cts exports buildPhaseHeadingRegex, searchPhaseInContent calls it, the test imports it. Byte-identical .source and .flags verified for both escaped forms. MINOR — '..foo' no longer false-flagged as an escape; the inverted spurious-vs-missing doc claim corrected; the dead allow-test-rule header removed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * chore(#3412): backfill changeset pr number to 3416 * fix(#3412): make the escape guard's own regex linear, reword an injection-scan collision Two CI failures on PR #3416, both in code this branch added. CodeQL js/redos (high) — REPLACE_CALL_RE's outer alternation let a bracket run be consumed EITHER by the character-class branch OR one character at a time by the trailing catch-all, so a failing match explored both parses of every pair. Measured on the real regex: n=26 -> 204ms, n=28 -> 791ms, n=30 -> 3475ms, a clean 2^n. This script scans repo source, so a file with a long bracket run after '.replace(/' would hang CI outright — a guard against undisciplined pattern construction was itself the worst pattern in the diff. Fixed the way ADR-3212 already prescribes: the catch-all branch now excludes '[' and ']' so a bracket can only be consumed by the class branch (this is what makes it linear), and every quantifier is bounded (the locked bounded-quantifiers decision) as a second line of defense. Now 0ms at n=2000. Disclosed coverage tradeoff, recorded at the constant: a regex literal with a BARE unescaped ']' outside a class is no longer matched by this backstop. No census shape has that form, and the AST rule remains the primary detector. Verified the guard did not go blind doing it: a real census-shape violation is still reported, and an allow-adhoc-regex-escape suppression comment is still honored. Regression test drives the exported findViolations on a 2000-repetition adversarial input and asserts the RESULT. It makes no wall-clock assertion — elapsed-time tests are forbidden — so a regression surfaces as a harness timeout, which is the correct signal. Prompt injection scan — 'must not act as a regex wildcard' in a test comment matched the scanner's jailbreak pattern act\s+as\s+(a|an|if| my). Reworded to 'behave as'. Deliberately NOT allowlisted: silencing a whole test file over one phrase would blunt the scanner permanently, and the comment has nothing to do with injection. Neither failure was reachable from the remote runner — CodeQL and the injection scan are not in that matrix, so the sha it passed was green and still wrong. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: sim <sim@local> Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
Tom Boucher
|
b9f51836e6 |
refactor(#3180): ADR-3180 behavior contract + cross-surface drift guardrails (#3223)
* refactor(#3180): one owner for completion ratio, a prompt-layer drift guard, and a written behavior contract The 2026-08-08 coverage audit on #3180 found the epic's copy counts were a lower bound for the third consecutive time, and that two derivation families had never been named at all. ADR-3180 gains Decision 7 — a normative behavior contract that says what the right answer IS for each derivation, not merely who owns it. A reviewer with no written rule can only ask "does this look like the others", which is how a fifth copy passes review. Decision 4 gains (d) scan surface is every authored surface and an owner FILE is never exempt, only its named functions; and (e) a surface that cannot be consolidated today ships ratcheted, never unguarded. Completion ratio: `clampPercent` sat exported and unused beside six hand-inlined copies of its own body across five modules. All six now route through it; `clampPercentFromFraction` is added for the one caller that already held a fraction. Every migration is behaviour-identical — clampPercent's first line IS the `total > 0 ? … : 0` ternary each copy carried. Guarded by lint-completion-ratio-drift.cjs, which reports zero re-derivations with no file-level exemption. Prompt layer: workflow markdown re-derives live-plan counting in raw shell (#1762), invisible to every `src/`-scoped guard. lint-planning-prompt-drift.cjs scans it with a shrink-only baseline of the 7 sites that exist today — new sites fail, and a baseline entry that stops firing fails too, so an acknowledgment can never outlive the thing it describes. lint-milestone-window-drift.cjs stops exempting its owner file wholesale; only the four named canonical functions are exempt now. The blanket exemption was pointed at the one file most likely to grow the next copy, and it had. Refs #3180 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(#3180): link Phases 6-8 sub-issues (#3216, #3217, #3218) from ADR-3180 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(#3180): address orthogonal review — consumer-output identity tests, count-keyed ratchet, property coverage Five findings from the two orthogonal review passes, all fixed. Decision 4(c) breach: the completion-ratio identity test asserted at the OWNER, which is exactly the bypass that decision exists to close — a consumer can call clampPercent and then post-process locally, leaving both the lint and an owner-level test green. It now drives `roadmap analyze`, `query progress` and `stats` and asserts on their own output, over a fixture containing a `status: superseded` plan so a consumer that re-counted raw files would report 60 where the owner reports 75. Decision 4(e) breach: ratchet entries named the epic (#3180) rather than the issue that removes them. They name Phase 8 (#3218) now. The ratchet keyed on (file, text) alone, so plan-phase.md's two byte-identical sites were one indistinguishable key and migrating either would have left the guard green with the other alive. Entries carry an occurrence count; fewer than acknowledged fails as a partial migration, more fails as a new copy. Adds the missing MAX_REGEX_LITERAL_LEN boundary coverage the sibling guard's test already had, and the fast-check property tests CONTRIBUTING requires for clamp/budget-limit functions. Refs #3180 Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * test: stop wrapping a nested double-spawn in a 15s wall-clock budget (bug #641 probes) `tests/ci-test-scope.test.cjs`'s `bug #641` block spawned `run-tests.cjs` under PROBE_TIMEOUT_MS=15000; that child then spawned a nested `node --test`. A fixed wall-clock budget around a double spawn, running inside a container that is concurrently executing the full ~31k-test suite, fails by construction under load. Confirmed against three full matrix runs. Every failure was shaped `null !== 0` — the child was KILLED, never an assertion about the thing under test. One captured probe had already printed the correct resolution (`suite="all" files=2: a.test.cjs b.test.cjs`) and was killed anyway. It reproduces on `next` alone: 5 failures on linux-node22, 0 on linux-node24. The victim subset varies by run and by lane. What these tests are actually about is suite-token RESOLUTION — `unit` as a bare token in --files/--files-from. Executing the seeded trivial files is incidental and is the entire timeout surface, so the assertions move in-process against the same functions `main()` calls, in the same order. `parseArgs`, `selectExplicitFiles`, `selectFiles` and `walkTestFiles` are exported for that; no behavior, signature or logic changed. No coverage lost: `tests/run-tests-harness.test.cjs` already spawns the harness for real and asserts exit codes end to end, on a 120s budget. Pre-existing on `next`, fixed here rather than deferred. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * test: delete the three elapsed-time assertions CLAUDE.md forbids asserting on wall-clock time. Three assertions did, and all three are load-sensitive: on a saturated bench each can fail while the code under test is correct. In every case the load-bearing assertion sits on the line above and the timing line adds no discrimination. run-with-timeout: the stated worry — "was this 124 the cap firing or the 30s harness backstop?" — is already answered by the assertion above it. A backstop kills by signal, which surfaces as status null, never 124. Observed directly this session: three matrix runs produced exactly that null shape from killed children. normalize-test-command and context-predicates: both bounded a ReDoS check. A threshold only ever separates "fast" from "slightly slow", which is bench load, not correctness — catastrophic backtracking on 800 KB of input does not take 251ms, it does not finish at all. A real regression therefore shows up as the suite being killed on that test, which is louder and more reliable than a number. The structural assertions (returned unchanged; cleanly rejected) are what actually carry those tests, and they stay. The sweep now reports zero elapsed-time assertions in tests/. The remaining Date.now() uses are unique-path suffixes, barrier deadlines, fixture timestamps and fake mtimes — none of them assertions. Pre-existing on `next`, fixed here rather than deferred. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * chore(#3180): backfill changeset PR number (#3223) Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(#3180): key the prompt-drift ratchet on POSIX paths so it works on Windows The baseline keys on (file, trimmed text). `file` came from scanTree's `path.relative()`, which uses NATIVE separators, while the committed baseline stores POSIX. On Windows every violation was therefore unmatched — reported as FRESH — and every baseline entry matched nothing — reported as STALE. The guard failed 100% of the time there, on both CI shards: ✖ scanRepo(repoRoot) matches the baseline exactly: zero fresh AND zero stale + { file: 'gsd-core\\workflows\\execute-plan.md', ... } The remote runner this repo gates on is Linux-only and cannot see this class at all; the GitHub Actions Windows lane is what caught it. Normalization is unconditional — never gated on process.platform. A platform-conditional normalizer makes the POSIX path the special case and leaves the Windows branch unexercised on every other OS, which is the same blind spot in a different place. It is applied at one seam inside findPromptDrift, which builds `file` on every returned violation, so the baseline key, the --update writer, the stderr report and the tests all consume one normalized value. The regression tests drive a Windows-shaped relPath directly and run on every OS rather than skipping off-Windows — a test that only runs on the platform where the bug lives is why this escaped. They include a sanity check that un-normalized input does NOT match, so the assertion cannot pass vacuously. Audited the three sibling guards: none keys against a committed cross-platform baseline, and their exemption keys are path.join-built, so producer and consumer share the native convention. Left correct code alone rather than making them look alike. scripts/lib/drift-scan.cjs is untouched — normalizing there would break those three on Windows. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: sim <sim@local> Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
0xdhx
|
12cfd27f53 |
docs(#2665): the guard's own comments still described one kimi home, not two
Same drift as the CONTEXT.md seams, one layer over: #2755 took NON_REGISTRY_CONFIG_HOME_DESCRIPTORS from one entry to two, and five comments across three files were left describing the one-entry world — "two live write surfaces", "today's only entry", "today's single entry", and a <kimi>/config.toml bullet naming only Kimi CLI's KIMI_SHARE_DIR. The sharpest one was a wrong pointer rather than a stale count: run-tests.cjs cited "scripts/lib/live-config-guard.cjs" for why the scope is narrow. That path does not exist, and it names the one directory this module is deliberately NOT in — the installer copies scripts/lib/ to users wholesale while uninstall removes only an allowlist, which is the whole reason the guard lives one level up. A reader following that pointer would have concluded the opposite of the decision. Comments only; no behaviour change. lint:ci rc=0, tests/live-config-guard.test.cjs 24/24, tests/run-tests-harness.test.cjs 138/138. |
||
|
0xdhx
|
a294ec2a2b |
test(#2665): widen the hermeticity guard to its two blind surfaces, and cover its budget
Round 2, both Majors. They are one defect seen twice: the recurrence guard did
not cover the surface it exists to guard.
Blind surfaces. resolveLiveConfigRoots enumerates getGlobalConfigDir per registry
runtime plus a hardcoded grok branch, so it can only ever see runtime config
ROOTS. Two live write surfaces are not roots and passed through silently:
$GSD_HOME/.gsd — GSD's user-owned store. Watched WHOLESALE: unlike ~/.claude
this root is exclusively ours, so the shared-root
false-positive trap the module documents does not apply.
<kimi>/config.toml — the file GSD writes its native [[hooks]] block into. The
INVERSE case: ~/.kimi belongs to Kimi CLI, so only the one
file GSD writes is watched, never the root.
That asymmetry is why this is not a two-line "add two roots" patch — one target
needs the whole tree, the other needs exactly one file, and collapsing them
either under-watches the store or trips the guard's own documented
false-positive trap on a third party's directory.
Extras are passed to snapshotLiveConfig explicitly rather than resolved inside
it, so a caller snapshotting a fixture root cannot silently pull the developer's
real ~/.gsd into its own assertions. run-tests.cjs now snapshots when EITHER the
roots or the extras are non-empty — previously an unbuilt tree yielding zero
roots disabled the entire guard without saying so.
Budget coverage. The MAX_ENTRIES/MAX_DEPTH bound and the truncated -> 'unverified'
branch had zero tests, despite this module's own docstring naming "a truncated
scan reading as clean" as the safety-critical case. Added per
RULESET.TESTS.boundary-coverage (N in {limit-1, limit, limit+1}, exercised
through newestMtime's injected budget so the boundary is real without
materialising 20000 files) and RULESET.TESTS.property-based-testing (fast-check:
truncation is monotone in the budget; reported newest never exceeds the true
maximum). A regression flipping `truncated` to false on an exhausted budget now
breaks the property for every budget below the tree size.
Negative-controlled: neutering the extras wiring fails exactly the two
new-surface tests and nothing else. 21/21 green with it restored.
|
||
|
0xdhx
|
e2eed1c58a |
test(#2665): ship the hermeticity guard at report level, not fatal
Its first CI run found PRE-EXISTING leaks on the Windows lane — C:\Users\runneradmin\.claude\gsd-core and skills\gsd-dev-preferences — with all 1196 Windows tests otherwise passing. os.homedir() reads USERPROFILE on Windows, and ~190 test sites across 31 files sandbox HOME alone, so the suite has been installing GSD into the runner's real home directory invisibly. That is exactly the class the guard exists to surface, and exactly the class this PR's review said CI could never catch. It is also a different defect from the one #2665 closes, and too large to fold in here. A brand-new gate that immediately reds an unrelated lane gets bypassed or reverted rather than obeyed, so the guard reports by default and fails only under GSD_STRICT_LIVE_CONFIG_GUARD=1. This is the repo's own established ratchet, not a hedge: the local/no-source-grep ESLint rule shipped at `warn` and was promoted to `error` after its cleanup sweep (ADR 452). Promote this the same way once the USERPROFILE sweep lands. |
||
|
0xdhx
|
a02462e050 |
test(#2665): fail the suite when it writes into a live config dir
The recurrence guard, and #2665's own "Optional hardening". This class is silent by construction: TEST_ENV_BASE cannot see an in-process caller, and CI cannot see the class at all because CI never has these env vars set. It damages the developer's machine and reports nothing -- which is how two prior authors each diagnosed it and fixed only the instance in front of them. run-tests.cjs snapshots GSD's install footprint in every live runtime config dir before the suite and re-checks it after, failing the run on a create or a modify. Roots come from the product's own getGlobalConfigDir, so the guard watches wherever the product actually points, including through an ambient var. Scope is ownership-based, not whole-root: the top-level install footprint plus gsd-prefixed children of dirs GSD shares with the host agent. A config root like ~/.claude is shared, and watching it wholesale would false-positive on the host's own history.jsonl or settings.json -- a guard that cries wolf gets disabled, and then catches nothing. The prefix test is load-bearing: the first version watched only the three top-level entries and MISSED a real leak into skills/gsd-*. It earned its place immediately -- it is what found the fifth in-process leak in runtime-artifact-layout.test.cjs, which no amount of reading the review would have surfaced. Known gap documented in the module: a write to a file GSD does not own is out of scope by construction. Lives in scripts/, deliberately NOT scripts/lib/ -- the installer copies that dir into every user's config dir wholesale while uninstall removes only an allowlist, so a test-only module there would ship to users and survive uninstall. Addresses review finding: Minor 8. |
||
|
Tom Boucher
|
33fd203ccd |
test(#2966): loop QA walk — drive real scenarios across all five loop steps (#2976)
* test(#2966): loop QA walk — drive real scenarios across all five loop steps Adds a headless walk that carries accumulating project state across discuss -> plan -> execute -> verify -> ship against one temp project, layered over the existing tests/helpers.cjs runGsdTools substrate. Findings carry severity. A violation breaks a stated contract and fails the build; a smell is legal under today's implementation but structurally questionable, is recorded, and never reddens CI. Without that split an oracle set derived from current behavior can only ever confirm current behavior -- the harness could not say "this works and is still wrong". The end-to-end test asserts the walk produces at least one smell: a QA harness that reports nothing on a first run against a real engine is far more likely mis-specified than the engine is perfect. It deliberately does not pin smell ids or counts, which would re-freeze current behavior. First run against the real engine: 0 violations, 3 smell classes -- init returns agents_dir outside the project tree; smart-entry emits prose unconditionally so routing cannot be asserted; state-snapshot reports a missing STATE.md through a payload key with exit 0. Also fixes tests/fixtures/index.cjs: createFixture with git:true and planning:false staged nothing, so the commit failed with "nothing to commit". That combination was unreachable until greenfield needed it. Extends RULESET.TESTS.feedback-loop-convergence from estimation to the loop itself. Design lock: docs/adr/2966-loop-qa-walk.md. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * test(#2966): wire fault injection, make perturbations discriminating Independent review found tests/qa/mutations.cjs entirely unwired: 462 lines exercised only by their own unit tests, with no mutation hook in the scenario DSL and no scenario applying one, while the module header and the ADR described fault injection in the present tense. Dead code documented as live. Adds a `mutate` step field, three perturbation scenarios, and a wiring detector: a self-test scenario whose expectations are known-false and which MUST fail. The previous anti-vacuity check asserted only that the walk produced a smell, which passes on well-known engine behavior regardless of whether the harness wiring works. First perturbation attempt produced zero signal -- progress does not structurally parse ROADMAP.md, so a corrupted roadmap sailed through. A perturbation that cannot fail is the same defect in a new costume. Probes now target roadmap get-phase, and each mutated step runs a clean baseline first so `mutationObserved` records whether the corruption changed anything at all. Also clears four review findings: classify() returned PROSE for exit-0 with empty stdout; `warnings` was structurally unpopulatable on the success path (execFileSync discards it) and is now documented as error-path-only; read-only-idempotence passed vacuously when asked to check idempotence without the data to check it; the ADR miscounted the oracles. Discrimination matrix across 8 mutations x 6 commands: bom, duplicate-phase-id and escaped-pipes are absorbed silently by every probed surface, and progress / smart-entry / roadmap validate never reacted to any mutation. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * test(#2966): add path-containment guard for scenario-supplied targets Security review found scenario-supplied paths joined to the temp project with no containment check. step.mutate.target and agent.write keys were validated only as non-empty strings, so a target of ../../../../etc/hosts reached fs.unlinkSync / fs.writeFileSync / fs.symlinkSync outside the project. The symlink mutation was worst: it read the traversed file, wrote a sibling copy, deleted the original and symlinked it back. Not exploitable today -- all shipped scenarios target .planning/ROADMAP.md and scenarios are repo-committed, not runtime input. Fixed anyway: it is a live primitive any future scenario or copied helper can reach. Adds tests/qa/paths.cjs with resolveWithin(): rejects absolute paths, NUL bytes and empty input, normalizes separators unconditionally, and requires containment by path segment so a sibling like <base>-evil is not treated as inside. Non-existent targets resolve via nearest existing ancestor rather than falling back to a lexical compare. Scenario load now rejects traversing or absolute targets up front. oracles.cjs previously carried its own copy of the containment logic; both now share paths.cjs, since a duplicated containment check is exactly the divergence class this repo calls out. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * test(#2966): complete trajectory corpus, report emission, boundary-aware oracle Adds the remaining trajectories and drives all 11 mutations end-to-end. 20 scenarios, 72 steps, 0 violations, 25 smells. Adds qa-report.json with per-step verdicts and a copy-pasteable repro command, plus --keep / GSD_QA_KEEP=1 to preserve a failing tree. A repro line for a tree that was not preserved is marked NOT RUNNABLE rather than emitting a command pointing at a deleted directory. monotonic-progress is now boundary-aware. Two scenarios had been trimmed to stop the oracle complaining at a milestone rollover, which destroys the signal the trajectory exists to produce. Evidence: counters legitimately reset to zero at milestone complete, but the payload milestone_version lags until a new ROADMAP.md is written. So the oracle now scopes by milestone plus workstream, keeps a same-scope decrease as a violation, and records a boundary crossing as a smell. Both scenarios walk the real boundary again. Standards review fixes: oracle findings now carry a structured subject so tests assert on typed fields instead of substring-matching the free-form detail string, resolveWithin throws a typed EPATHESCAPE error, and the absolute-path predicate scenario.cjs had re-implemented now comes from paths.cjs. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * test(#2966): fix silently-vacuous fixtures and guard the class Every fixture carried its #2371 provenance comment BEFORE the frontmatter block, and extractFrontmatter returns {} when anything precedes the opening ---. So every scenario reading status/phase/name was operating on an empty object and reporting green. Nine fixtures repositioned; the comment stays, it just moves below the closing ---. Both UAT fixtures lacked a parser-recognized result block, so evaluateUatPassed saw checks.length===0 and could never return passed:true. The uat-fail-then-remediate scenario could not have proven a remediation. Its expect block only inspected blockers, which is empty before AND after, which is why the corpus never noticed. Both fixtures now carry real result blocks and the scenario asserts passed and no_uat_artifacts on each side of the flip. The actual deliverable is the guard: a fixture-integrity block asserting every fixture with a frontmatter shape parses to a non-empty object, that every fixture carries its provenance marker, and that the two UAT fixtures produce opposite verdicts through the real evaluateUatPassed. The first guard written required --- at byte 0, which would never have fired on the regression it exists to prevent; it was rewritten and proven by deliberately re-breaking a fixture. No engine defect here. no_uat_artifacts means no parsed check items, not no UAT files, and it was reporting correctly on fixtures that had none. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * test(#2966): make the walk report — smell ratchet, baseline, CI job The harness computed smells into a gitignored qa-report.json that nothing read. In CI it surfaced nothing at all: violations failed the build, but the half of the tool that says "this works and is still wrong" was inert. A QA tool nobody hears is decoration. Adds a ratchet on the same idiom this repo already uses three times over (the regression-test-name allowlist, the emitted-drift acks, the size baseline): a committed smell-baseline.json, per-PR acknowledgment fragments under tests/qa/smell-acks/, and a ratchet script wired into CI. The design invariant is preserved exactly. A smell still never fails a build on its own merits. What fails is an UNACKNOWLEDGED NEW smell -- the absence of a decision -- leaving an author two honest exits: fix it, or record a fragment with a real reason. An empty reason is rejected. The baseline is shrink-only, so a fixed smell must prune its entry. Violations remain unacknowledgeable. Fingerprints are composed only from stable fields (oracle id, scenario, argv, subject discriminator) -- never temp paths, timestamps or counts. Verified byte-identical across two runs in separate temp dirs; an unstable fingerprint would have false-positived every CI run. CI gains a qa-loop-walk job that runs the suite and the ratchet, uploads the report with `if: always()` (it matters most when it failed), and renders a summary a reviewer reads without downloading anything. Also fixes the report runner invoking main() unconditionally on require, so importing it double-ran every scenario and clobbered its own output. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * test(#2966): every smell terminates in a defect or a fixed detector The baseline accepted a smell with a free-text reason. That is a mechanism for designing smells in -- an allowlist nobody revisits. The harness is brand new, so nothing it found is inherited legacy; every finding is a FIRST finding. Each must now terminate in exactly one of two states: REAL -> an assigned defect, entry carries the issue number FALSE POSITIVE -> the detector is wrong and gets fixed, never baselined There is no third "accepted with a good explanation" state, so the ratchet now requires a positive-integer `issue` on every entry. A reason may remain as a human note but can never substitute. `--update` refuses to invent issue numbers: a new smell is written with `issue: null` and a TODO, and the next plain run rejects it, forcing triage rather than accumulation. Working the 21 existing entries through that rule found 16 were my own detectors being wrong: value-hygiene (10) flagged $.agents_dir, a field whose entire contract is to point at the install tree outside any project. Fixed with a leaf-key allowlist of contractually-external fields, verified as the only such key in the init payload. Genuinely unexpected out-of-project paths still smell. monotonic-progress (6) fired on legitimate boundary crossings -- milestone v1.0 to v2.0, workstream beta to alpha -- and on one payload carrying no scope fields at all, where a change cannot even be known. Scope changes now reset silently and scope-less observations are skipped. The same-scope decrease remains a violation; that is the real invariant and is regression- guarded. The five survivors are real and now tracked: soft-error-exit-zero (#2980), untyped-success (#2979). Baseline 25 -> 5. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * test(#2966): keep the ratchet out of the tarball, unpin the qa CI job The remote matrix returned failed -- 3 unique failures, identical on node22 and node24, both root causes in this branch's own diff. The ratchet lives under scripts/, which ships in the npm tarball, and it requires three modules under tests/, which does not. In a published install it is MODULE_NOT_FOUND at load. This is exactly the class the #2858 guard was added to catch, and it caught it. Fixed the way #2858 fixed the same shape for its own repo-only CI script: a targeted files[] negation, so the ratchet stays in the repo for CI and out of the tarball. Not solved by moving or inlining the required modules -- the ratchet must keep using the same code the harness uses, or the two drift. Verified both directions: the script is no longer in the pack list, and build-hooks.js, fix-slash-commands.cjs and gen-capability-registry.cjs are all still shipped. Over-negating there would have broken installs, since bin/install.js requires them. The qa-loop-walk job also carried CI_REBASE_BASE_SHA copied from a neighbouring job without the paired GSD_EMITTED_BASE, which the #2854 invariant forbids by name: diverging them makes the differential compare a tree against a baseline from a different commit. The job runs only the qa suite and the ratchet and invokes no emitted-attribution test, so it needs no rebase-pinned base at all -- the step was removed rather than paired. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * test(#2966): stop monotonic-progress going blind on scope-less payloads The full remote suite caught a false NEGATIVE I introduced while fixing a false positive. Silencing the boundary-crossing noise had made the oracle skip ANY observation lacking milestone fields -- so a minimal payload like {total_summaries: n} produced no violation at all, and the oracle stopped catching the exact defect it exists to catch. For a QA tool that is strictly worse than the noise it replaced. Scope is only indeterminate when the two observations DISAGREE about having it: both scoped, same scope, decrease -> VIOLATION both scoped, different scope -> reset silently NEITHER scoped, decrease -> VIOLATION (the regression) mixed -> skip the comparison Implementing the mixed case surfaced a second blind spot: advancing the reference point on a skipped pair lets a scope-less observation sitting between two same-scope ones mask a real decrease. Mixed now leaves the reference untouched. All four branches carry explicit coverage; only one did before, which is why this shipped. The self-test that failed was right and the code was wrong, so the code moved. Corpus behavior is unchanged: still 5 smells, 0 new, 0 stale, 0 violations. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 <noreply@anthropic.com> |
||
|
Tom Boucher
|
bf0d715733 |
fix(#2472): cost-balanced test sharding and pinned CI base commit (#2480)
* fix(#2472): weight-aware shard partition Windows shard 1/3 hit the 20-minute job cap with no failing assertion. Root cause is the shard layer, not the chunk layer: selectShard partitioned by sorted ARRAY INDEX (k % n, #1212), which balances file COUNTS and ignores file COST. On the real unit suite that produced 12.4m / 19.2m / 15.2m — a 1.23x max/ideal ratio leaving the heaviest shard 5% under the cap. Because assignment keyed off position, inserting one test file re-indexed every file after it and could tip that shard over; deterministic, so a re-run reproduced it exactly. This is NOT the chunk packer (#2456/#2463). That fix works and applies one level down, WITHIN a shard. The across-shard partition predated it and never consumed the cost table. Both layers now share one cost model. selectShard takes an optional weightOf and, when given one, partitions by LPT (longest-processing-time-first) — the same algorithm packChunks uses. Omitting it keeps the legacy round-robin byte-identical, so every existing test above still exercises that path unchanged and callers without timing data lose nothing. A missing timings table yields uniform weight 1, under which LPT degenerates to the equal-count split. Projected on the real suite: 16.4/17.3/13.0 -> 15.6/15.6/15.6 (worst shard 17.3m -> 15.6m). Tests: a skewed-cost regression (round-robin clusters all four heavy files onto one shard at 2.98x ideal; LPT does not), back-compat equivalence, determinism, tie-breaking, order preservation, and two fast-check properties — the partition is exhaustive and disjoint (getting this wrong silently DROPS tests from CI, the worst failure mode for a harness), and no shard exceeds average + heaviest file. Two assertions were corrected during authoring rather than shipped wrong: - an initial "LPT within 4/3 of ideal" bound was false. The 4/3 figure is relative to the OPTIMAL makespan, not the average, and the two differ when item sizes force a pairing. Replaced with Graham's average+max bound, which is what is actually provable. - "weighted is never worse than round-robin" is also false; fast-check falsified it with [19316,10190,1,9128,29353,20227] over 2 shards (rr 48670, lpt 48671). Round-robin can win by luck on a specific input. Dropped, with the counterexample recorded in place so it is not re-asserted later. Closes #2472 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2472): rotate tied bins; restore #1212 test block; lazy cost table Isolated-review findings, all fixed. HIGH — zero weights collapsed the whole partition onto shard 1. The lightest-bin scan compared weight only, and adding a zero-weight file leaves its bin's weight unchanged, so bin 0 stayed tied-minimum forever and every such file landed on it. Verified: all-zero weights gave shard1=[a..f], shard2=[], shard3=[] — two of three CI runners idle while one ran everything. Reachable through safeWeight's own clamp (a NaN/negative/Infinity entry in a corrupted or hand-edited timings table) and through any genuine 0ms measurement, so the clamp reproduced the exact failure its comment claimed to prevent. Ties now break on file COUNT after weight, which rotates. Pinned by two regression tests (all-zero, and clamped NaN/negative/Infinity) plus a property over list size x shard count. The live table has no 0ms entries (min 19ms), so production was not affected — but nothing prevented it. MEDIUM — the new describe block had swallowed #1212's pre-existing property test, which is why a test under a "weight-aware" heading never passed a weigher. That was a bad block boundary in the previous commit, not a bad test: the #2472 describe was opened before #1212's last test instead of after. Moved back where it belongs; #1212 is 762-879 and #2472 is 894-1082. LOW — that relocated property test ran unseeded. Seeded (12120) per the repo's property-test convention so a failure reproduces. Verified passing under the new seed. LOW — hoisting the timings load above the shard block charged a readFileSync + JSON.parse to invocations that exit before needing it (empty selection, --files matching nothing). Now lazily memoized, so neither consumer reads the table unless it is used and it is still read at most once. Real-suite projection unchanged at 15.6m / 15.6m / 15.6m. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * docs(#2472): correct stale round-robin sharding descriptions The partition is now cost-balanced, so the header block in run-tests.cjs and the two comments in test.yml describing '--shard' as a round-robin over sorted file index were actively wrong. Updated to describe LPT over measured duration, and to state the degenerate case explicitly: with no timing data every file weighs the same and the partition collapses back to k % n, which is why the pre-existing #1212 CLI tests still pass unchanged (their nine synthetic files are absent from the timings table, so all take the identical median weight). Remaining 'round-robin' mentions are correct — they describe the unweighted fallback path. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2472): shard diagnostics, cost-routing E2E test, table validation Second orthogonal review (operational lens) findings, all fixed. HIGH — cross-runner partition divergence. Each of the up-to-12 CI jobs runs its own 'merge base into head' and computes its own partition, so if the inputs differ between jobs (the file list, or the timings table) two jobs can place the same file in different shards or in none. Every job stays internally exhaustive and disjoint, so nothing errors: a test simply never runs and CI stays green. The risk class is pre-existing — round-robin diverges identically when the file set differs between jobs, which is literally this issue's insertion instability — but weighting adds tests/test-timings.json as a second input that must match, so it widens the hole. Properly closing it means pinning the partition inputs per run, a workflow change beyond this fix. What IS closed here is the silence. Each shard now prints an input fingerprint over the FULL pre-partition list and the weight assigned to each file — deliberately not this shard's slice, which would differ by design and be useless for comparison. All shard jobs of one run must print an identical sig; a mismatch is direct proof the runners disagreed about the input. Verified: three independent computations agree, and the sig changes when the input drifts by one file. MEDIUM — nothing proved main() actually threads fileWeightOf() into selectShard. Every pre-existing --shard E2E test uses synthetic filenames absent from the real table, so all collapse to a uniform median weight, under which LPT is mathematically identical to k % n — a typo on that one wiring line would have passed the whole suite. Added an E2E test that injects a table via RUN_TESTS_TIMINGS_FILE with differing costs, placing the heavy files at exactly the indices round-robin hands to shard 1, and asserts shard 1 does NOT receive all three. Plus a test that all three shards emit the same sig. MEDIUM/LOW — no observability. The diagnostic line now reports files, weighed count, aggregate weight, and whether the table loaded, so a table that silently failed to parse shows table=absent/weighed=0 instead of being indistinguishable from a healthy load. (The reviewer confirmed the advisory fallback is already live on next: feat-2296-provider-escalation.test.cjs is missing from the table.) LOW — typeof [] === 'object', so a hand-edit turning the map into a list was accepted as a valid table. Now rejected via Array.isArray, falling back to uniform weight like any other malformed table. LOW — stale round-robin wording in ci-test-scope.test.cjs. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2472): pin every CI job to one base commit Closes the cross-runner divergence at its source instead of only making it visible. Each job of a run executes the rebase-check step independently, minutes apart across a 12-job matrix, and merged the MOVING origin/<branch> ref. If the base advanced mid-run, different jobs merged different trees. That was survivable when jobs only had to agree on pass/fail; it is not once they must agree on a PARTITION. Each shard job computes the whole split and keeps its own slice, so jobs working from different trees can place a file in two shards or in none — and every job still looks internally consistent, so nothing errors. A test silently never runs and CI stays green. ci-rebase-check.cjs now accepts CI_REBASE_BASE_SHA and pins BOTH the fetch and the merge to that one commit, so the two can never disagree. test.yml passes github.event.pull_request.base.sha on all three rebase-check steps; that value is fixed for the life of a run, so all jobs merge the identical base. This also closes the PRE-EXISTING half of the divergence. Round-robin had the same exposure whenever the test-file set differed between jobs — that is this issue's insertion instability — so the pin fixes the older hole too, not just the timings-table input weighting added. Only a full 40-hex sha is accepted; empty (push/workflow_dispatch), malformed, or injected values fall back to the branch ref rather than handing an arbitrary string to git fetch as a refspec. resolveBaseRefs is extracted pure and exported, and runMain is guarded behind require.main === module, so the pin contract is testable without spawning git. Tests (tests/ci-test-scope.test.cjs): every rebase-check step must carry the pin; a valid sha pins both refs; absence falls back correctly; and five hostile values — short sha, uppercase, --upload-pack= injection, ref expression, empty — are each rejected. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
448e148058 |
fix(#2455): abort remaining chunks when one hits the per-chunk timeout (#2465)
The per-chunk timeout exists so a bad chunk fails loudly 'rather than silently burn the job's wall-clock budget until the CI runner cancels the whole job' (run-tests.cjs:633-637). The control flow defeated that: after a timeout kill the loop fell through to the next chunk. Since the timeout (600000ms) is half the 20m job cap and a healthy Windows full pass is ~11m42s, continuing after a timeout can essentially never finish. Observed on run 29749380190 (windows shard 2/3): chunk 1/5 was killed at exactly 600s, the loop pressed on through chunks 2-4, and the job was cancelled mid-chunk-5 at the 20m wall. The failure surfaced as '##[error]The operation was canceled.' — the timeout diagnostic ended up ~38,000 log lines from the end and 'gh run view --log-failed' returned nothing, making the real cause very hard to find. Abort the remaining chunks on a timeout so the diagnostic survives as the visible failure. Ordinary test failures still run every chunk, so the operator keeps seeing all failures in one pass. Fixes #2455 Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
953b8043ea |
fix(#2456): weight test chunks by measured cost and pack with LPT (#2463)
* fix(#2456): weight test chunks by measured cost and pack with LPT scripts/run-tests.cjs guessed each test file's cost from its filename (basename matching /^(?:install|codex-)/ scored 12, everything else 1). Measured durations show that guess is wrong in both directions: installer-migration-authoring.test.cjs scored 12 while running ~0.1s, and the two most expensive files in the suite both scored 1 — run-tests-harness.test.cjs never matched the prefix, and release-tarball-smoke.install.test.cjs was missed because the regex is anchored to the START of the basename. Chunks were therefore balanced by file COUNT, not cost. On the real shard 2/3 the two heaviest files packed into the SAME chunk, leaving the slowest chunk 2.8x the lightest and sitting near the 600s per-chunk timeout while other chunks idled. Weight each file by its measured duration from a checked-in, regenerable timings table and pack with LPT (heaviest first, into the lightest chunk). On the same shard this drops the slowest chunk from 383s to 238s and the imbalance from 2.79x to 1.00x, and separates the two heavy files. Timings are advisory, never gated: an unknown file falls back to the table's median weight, a missing or corrupt table falls back to uniform weight, and a count-based floor guarantees the packer never produces fewer chunks than plain count-based packing would. Closes #2456 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2456): harden chunk packing against degenerate knobs and table keys Follow-up hardening found while reviewing the packer, fixed inline. The chunk knobs are read from the environment with Number(), so a typo (RUN_TESTS_MAX_FILES_PER_CHUNK=abc) yields NaN and an explicit 0 yields 0. Both flow into the new chunk-count arithmetic: NaN made Math.ceil return NaN, Array.from({length: NaN}) produce zero bins, and packChunks' retry loop spin forever — a hung CI job with no output. Zero made the count Infinity and threw RangeError: Invalid array length. The previous count-based packer degraded to a single chunk instead, so this was a regression introduced by the LPT rewrite. Normalize the knobs at the environment boundary (positiveNumberEnv: anything not a positive finite number falls back to the default) and guard packChunks itself, since it is exported and cannot assume its caller normalized. Non-finite weights from an arbitrary weightOf are clamped too. RUN_TESTS_CHUNK_TIMEOUT_MS gets the same treatment. Also resolve timing-table lookups with Object.hasOwn: the table is JSON-parsed, so a bare index would walk the prototype chain and return a function for a file named constructor.test.cjs or toString.test.cjs. The typeof guard already rejected that, but the lookup now resolves correctly rather than relying on the downstream check. Refs #2456 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2456): correct prototype-lookup rationale and guard generator keys Two findings from independent security review, fixed inline. The makeFileWeigher comment claimed a bare table lookup "would return a FUNCTION for a file named constructor.test.cjs". That premise is false: basename('constructor.test.cjs') is 'constructor.test.cjs', which is not an Object.prototype key, and walkTestFiles only ever collects *.test.cjs. The prototype chain was never reachable from a real selection, and the existing typeof guard already rejected the function it would return, so Object.hasOwn is defense-in-depth rather than a behavior change. The comment now says that instead of asserting something untrue. The accompanying test inherited the same false premise: it fed constructor.test.cjs and asserted a median fallback that would have held with or without the guard, so it passed for a reason unrelated to what it claimed to prove. It now uses BARE keys (constructor, toString, valueOf, hasOwnProperty, __proto__) — the only inputs that actually resolve on Object.prototype — and asserts the real exported contract: any key absent from the table weighs the median, never a function. gen-test-timings.cjs built its output object by computed-key assignment from basenames taken out of a reporter stream it does not control — the js/prototype-polluting-assignment shape, and this repo has a CodeQL barrier for exactly that pattern. It was not exploitable (the value is always a rounded number, so the __proto__ setter is a silent no-op), but it silently DROPPED such an entry rather than reporting it. Validate every key against a test-basename pattern and fail loudly instead, and build the table with a null prototype. Refs #2456 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2456): replace tautological chunking tests and clamp chunk count Six findings from independent correctness review, all reproduced and fixed inline. The two subprocess tests written to carry the #2088 guarantee forward were tautological: every seeded file weighed exactly 1, so both passed under the OLD prefix-heuristic packer and with the timings file deleted entirely. Neither could fail for the reason it existed. Both are rebuilt so the old algorithm produces a different packing and the assertion goes red: the spread test now uses three expensive files named so the old heuristic scored them 1 alongside three trivial `install-`-prefixed files it scored 12 — inverted from real cost, giving {2,2,1,1} under the old packer versus {2,2,2} under measured weights. The companion test covers the other direction: four trivial `install-` files the old heuristic split into four single-file chunks now stay in one. packChunks clamped the chunk count from below but not above, so a legitimate but tiny budget (RUN_TESTS_MAX_FILES_PER_CHUNK=1e-9, which positiveNumberEnv accepts) asked for 637,000,000,000 bins and threw RangeError. More chunks than files is never useful; the count now clamps at one file per chunk. The generator's basename-collision guard compared full dirnames, so two OS lanes reporting the same file under different container roots (/work/tests vs C:/work/tests) flagged every shared basename as a collision — on the script's own documented multi-lane usage. Detection is now scoped per stream, where the root is constant; a genuine same-lane collision is still caught. Also: the LPT tie-break compared raw paths, so a path separator (0x2F vs 0x5C) could order a subdir file differently per platform, contradicting the documented byte-identical guarantee — it now normalizes separators. loadTestTimings now honors schema_version instead of writing it and never reading it, falling back to uniform weight on an unknown version. A comment claiming an all-uniform suite "chunks exactly as it did before" was false and contradicted by this PR's own test: the chunk count is preserved, the composition is not. And the missing-table test created a temp dir it never cleaned up, for a path that only needed to not exist. Refs #2456 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
8b99f4f3c3 |
fix(#2088): weight install-heavy test files so they spread across chunks
The targeted CI lane runs changed files UNSHARDED; #2088 touched 13 install-heavy test files that all landed in one chunk, blowing the 600s per-chunk backstop on the slow Windows runner (pure slowness, not a leak — per run-tests.cjs's own comment). Weight install*/codex-* files (~10x a unit file) toward the per-chunk budget so they spread across chunks instead of clustering; light-file chunking is unchanged (weight 1). Adds harness regression tests (heavy split vs light control). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
97972ca7fd |
fix(#1575): lower MAX_FILES_PER_CHUNK from 90 to 60 to fix macOS Node 22 timeout
Shard 2/3 chunk 2 (~80 files including state.test.cjs, perf-*, worktree-cleanup) exceeded the 600s per-chunk timeout on macOS Node 22. Reducing the cap from 90 to 60 splits this into two ~40-file chunks, each well within the 600s budget. Three chunks at ~5 min each = ~15 min, safely under the 20m job cap. |
||
|
Jeremy McSpadden
|
e5ef323b15 |
feat(#1787): add /gsd:next smart entry workflow (#1798)
* docs: design spec for /gsd smart-entry command
Hybrid approach porting gsd-pi's smart-entry wizard to gsd-core:
deterministic classifier (gsd-tools smart-entry --json) + markdown
command/workflow with AskUserQuestion + --text fallback. Routing-first
('what now?' menu), 10 situations redesigned for gsd-core's phase loop.
* feat: add /gsd-start smart-entry command
State-aware front door adapted from gsd-pi's smart-entry wizard,
redesigned for gsd-core's markdown-first, multi-runtime architecture.
- src/smart-entry.cts: deterministic situation classifier (no-project,
paused, blocked, verify-failed, needs-first-phase, planning, executing,
verify-pending, idle-stranded, complete, unknown). Reads STATE.md,
ROADMAP.md, git, and verify signals; emits JSON the workflow consumes.
- gsd-tools.cjs: wire case + help listing.
- commands/gsd/start.md + gsd-core/workflows/gsd.md: thin markdown
dispatcher presenting an AskUserQuestion menu (with --text fallback for
non-Claude runtimes) and dispatching to existing commands. Falls back
to /gsd:progress if detection is unavailable.
- help.md: document /gsd:start (parity with bug-2954).
- tests: smart-entry.unit.test.cjs (classifier behavior across all
situations + priority + JSON shape) and gsd-workflow.structure.test.cjs
(markdown-layer invariants + every emitted command resolves to a real
slash command).
Spec: docs/superpowers/specs/2026-06-27-gsd-smart-entry-design.md
Note: command-contract (ADR-0002) requires a gsd:* prefix, so the bare
/gsd from the spec surfaces as /gsd-start.
* refactor: rename smart-entry command to /gsd:next
Rename the command from /gsd:start to /gsd:next per feedback. The
command file is now commands/gsd/next.md (name: gsd:next) and the
backing workflow is gsd-core/workflows/smart-entry.md (named for the
smart-entry classifier and gsd-tools smart-entry subcommand; does not
collide with the existing workflows/next.md, which is the progress
--next sub-workflow). help.md and the spec updated to match.
All affected tests (188) pass; lint:ci clean.
* fix: smart-entry reads real STATE.md schema (nested progress YAML + body Phase field)
Codex review found the classifier misread this repo's own STATE.md: it
looked only for scalar current_phase/total_phases frontmatter and body
fields named 'Current Phase'/'Total Phases', but real STATE.md stores
the phase as body 'Phase: N' and total_phases/percent under a nested
'progress:' YAML object. Both came back null, so active projects
(e.g. this repo at Phase 3 / verifying) wrongly classified as
needs-first-phase.
- detectSignals now reads total_phases + percent from nested progress{}
first, then scalar fm, then body; current_phase falls back to the
body 'Phase:' field (parseProsePhaseField lineage).
- Add regression tests against the real schema (nested progress YAML +
body Phase field) covering verify-pending + executing situations.
Verified against this repo: now classifies verify-pending (was
needs-first-phase). Coverage 93.25% lines / 86.99% branches.
* fix(workflow): tiered fallback when gsd-tools is broken (not just smart-entry)
Live test exposed a self-defeating fallback: when smart-entry --json
failed because gsd-tools itself was broken (missing
markdown-sectionizer.cjs), the workflow fell back to /gsd:progress —
which also depends on gsd-tools and would dead-end too.
Replace the single /gsd:progress fallback with a tiered recovery:
1. Probe gsd_run state-snapshot. If it ALSO errors, the whole tool
layer is down — read .planning/STATE.md directly with the Read tool
and synthesize a minimal situation + actions menu so /gsd:next stays
useful. Surface a rebuild hint.
2. Only if smart-entry alone is missing (older gsd-core), fall back to
/gsd:progress as before.
Matches the direct-read resilience the live agent already did by hand.
* docs: add gsd-next skill surface
* chore: trigger no-mistakes validation
* no-mistakes(review): Fix smart-entry phase ordering
* no-mistakes(review): Fix decimal smart-entry phase ordering
* no-mistakes(test): Fix smart-entry next test contracts
* no-mistakes(document): Docs synced for smart entry
* chore: add changeset fragment for #1798 (/gsd:next smart-entry workflow)
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
* fix: shorten next.md description and update golden install parity fixtures
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
* fix: update /gsd-next refs to /gsd:next in docs and add Smart Entry topic alias
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
* chore: trigger no-mistakes validation
* fix: regenerate INVENTORY-MANIFEST.json for new /gsd-next files
Full CI caught that adding commands/gsd/next.md + gsd-core/workflows/smart-entry.md
left docs/INVENTORY-MANIFEST.json stale (not in the affected-test scope that
no-mistakes' test gate runs, so it surfaced in CI). Regenerated via
node scripts/gen-inventory-manifest.cjs --write; inventory-manifest-sync
test now passes.
* fix: add 'next' to core_loop cluster, update INVENTORY-MANIFEST, fix gates.md ref
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
* fix: regenerate golden install parity fixtures for /gsd:next
Full CI (shard 3/3) caught that adding commands/gsd/next.md + the
smart-entry workflow/lib made the per-runtime golden install parity
fixtures stale across all 16 runtimes. Regenerated via
UPDATE_GOLDEN=1 node --test tests/golden-install-parity.test.cjs.
All 16 fixtures + inventory-manifest-sync now pass.
* Fix smart-entry verify-failed phase scoping and empty resolve shim step
Scope detectVerifyFailed to STATE.md's current phase so leftover higher
phase directories cannot force verify-failed routing. Move the gsd_run
shim resolver into the workflow resolve step so agents define gsd_run
before the detect step runs smart-entry.
* fix: recapture golden fixtures with updated gates.md hash (/gsd:next)
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
* fix: recapture all 16 golden fixtures with updated smart-entry.md hash
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
* chore: regenerate fixtures + inventory manifest after rebase onto next
Rebased onto next which adopted #1837 (package-version normalization to
<VERSION> in golden-install-parity hashes). Recaptured the golden fixture
that needed it (hermes), re-sorted INVENTORY-MANIFEST.json, and regenerated
the gsd-next / ns-workflow skill descriptions to match the command surface.
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
* refactor(#1787): delegate /gsd:next in-project advancement to gated /gsd:progress --next
Reconciles the /gsd:next smart-entry front door with the existing
/gsd:progress --next engine (davesienkowski review on PR #1798). The
classifier previously recommended /gsd:execute-phase directly for the
`executing` situation, bypassing workflows/next.md Route 0
(resume-incomplete-phase invariant, #160) and Gates 1-3 — reproducing the
duplication that got the old flat /gsd-next removed (#3054), plus a
correctness hazard (executing the recorded current phase while an earlier
phase is silently incomplete).
Now planning/executing/verify-pending recommend `/gsd:progress --next`
(single gated engine); the specific command stays an explicit secondary.
Off-path states (no-project, paused, blocked, verify-failed,
idle-stranded, complete) keep direct recommendations — smart-entry's
distinct value over --next. Adds docs/adr/1787-gsd-next-smart-entry.md and
a regression test locking the delegation contract.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* docs(#1787): avoid literal /gsd-next token in ADR (bug-3054 guard)
The repo-invariants #3054 guard bans the removed /gsd-next slash form in
docs surfaces. Refer to the removed command as `gsd-next` (prose) — the
historical reference is unchanged, just the banned token is dropped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* chore: gitignore compiled host-integration-sdk + handshake-serialized .cjs
Pre-existing gap from #1683: these two src/*.cts modules compile to
gsd-core/bin/lib/*.cjs but were omitted from the per-file ignore list, so
`npm run build`/`npm test` left them as untracked build artifacts (dirty
tree + accidental-commit footgun). Adds them alongside their siblings
(host-integration.cjs, mcp-server.cjs, …). Found while finishing #1798.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* test(#1787): lock per-situation action invariants for all 11 situations + ADR typo
Adversarial-review follow-ups:
- Add a test asserting every situation's action set has exactly one
recommended action, 1-4 unique-id /gsd:* actions (previously the
one-recommended/1-4 invariant was only sampled for 6 of 11 situations).
- Fix ADR typo: /gsd-progress → /gsd:progress.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(#1798): split oversized test chunks so a slow shard can't trip the per-chunk timeout
Root-cause of the intermittent `full test (windows-latest, 22, shard 1/3)`
failure. It was NOT a leaked handle (the runner's kill message guesses that,
but --test-force-exit already exits leaks cleanly). Diagnosis:
- Ran every shard-1/3 file WITHOUT --test-force-exit + a 45s kill-timer:
zero hangs, zero leaks — every file self-exits. So no leaked handle / hang.
- CI activity profile: output kept flowing (slowly) right up to the 600.0s
kill — a dead hang would go silent. => pure slowness.
- Per-file timing: install-minimal-hooks.test.cjs is a 4987-line / 250-case
consolidation file doing dozens of real installs — 41s even on a fast Mac
(much worse on the slow Windows I/O path), plus an install-heavy cluster.
Mechanism: MAX_FILES_PER_CHUNK=180 packed the whole ~171-file shard into ONE
`node --test` chunk, so the entire shard's wall-clock ran against a single
600s per-chunk backstop. On slow Windows runners that single chunk crossed
600s and was killed mid-run — an intermittent false-negative gate that also
hits `next` directly.
Fix: lower MAX_FILES_PER_CHUNK 180 -> 90 so each shard splits into ~2 chunks,
each with its own fresh 600s budget and a fresh node process (also relieves
per-process memory pressure). Verified locally: shard 1/3 now runs as
chunk 1/2 (90 files) + chunk 2/2 (81 files), 5323 tests, 0 fail. Also made the
timeout kill-message name slowness as a cause instead of asserting a leak, so
the next debugger isn't sent hunting a nonexistent handle leak.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Tom Boucher <trekkie@nomorestars.com>
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
|
||
|
Tom Boucher
|
b188c0d085 |
fix(#1967): build hooks/dist once upfront in run-tests to close scoped-CI empty-dir race (#1968)
* fix(#1967): build hooks/dist once upfront in run-tests to close scoped-CI empty-dir race hooks/dist/ is gitignored and not built by prepare (build:lib only), so the scoped CI lane starts with it absent. The first install test's before() hook triggers build-hooks.js, which creates DIST_DIR empty then fills it file-by- file; a concurrently-spawned install.js reader can observe the empty window and fail with 'Failed to install hooks: directory is empty' (intermittently failing e.g. bug-3683-workflow-colon-namespace-leak on scoped legs). Add ensureBuiltHooks() to scripts/run-tests.cjs — the same upfront chokepoint as ensureBuiltArtifacts — to build hooks/dist once, single-process, before any concurrent test spawns install.js. Completeness is checked against build-hooks.js HOOKS_TO_COPY (absent/empty/partial/zero-byte -> rebuild; complete -> no-op). Folds regression coverage into bug-969-test-infra-flake-hardening (Part C), proven fail-first (ensureBuiltHooks undefined on next). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * chore(#1967): set changeset pr to 1968 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
353f63d170 |
feat(#1431): runtime capability registry overlay (ADR-1244 Phase 2) (#1440)
* feat(#1431): runtime capability registry overlay (ADR-1244 Phase 2) Promote the registry from a frozen data file to loadRegistry({includeInstalled}), composing the first-party registry with a validated installed overlay (ADR-1244 D2): - Extract the conformance validator to a shared runtime-callable module (gsd-core/bin/lib/capability-validator.cjs); the generator re-exports it verbatim, guarded by a generative-parity test (no build-time/runtime drift). - capability-loader.cts: loadRegistry({includeInstalled}) composes first-party ∪ validated overlay from $GSD_HOME/.gsd/capabilities (global) and <root>/.gsd/capabilities (project) via the canonical buildRegistry. First-party always wins (id/skill/agent/config/command-family + reserved gsd-/anthropic- prefixes); full merged-set cross-capability validation; engines.gsd load-time re-gate (skip-with-warning); gate-kind capabilities FAIL CLOSED; fragment-path escapes rejected. - semverSatisfies (hand-written, no dep) for the engines.gsd gate, fail-closed. - Wire surface/state + loop to the overlay; loop injects a blocking gate for each skipped gate-kind overlay (fail-closed). - cwd-aware overlay config-key federation: config-loader _federatedConfigSchema(cwd) + config-schema isValidConfigKey(key, cwd) compose the overlay per loadConfig/ config-set call (never eager at module load, never wrong-cwd); first-party path unchanged with no cwd. - run-tests.cjs sandboxes GSD_HOME (idempotent — nested spawns reuse it) for test hermeticity; capability-loader.cjs git+eslint-ignored (tsc artifact); capability-validator.cjs stays linted (#551 migration coverage). Closes #1431 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * docs(#1431): add changeset for runtime capability registry overlay Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * test(#1431): kill config-schema cwd-aware federation mutants (Stryker ≥52) The cwd-aware overlay config-key federation added to config-schema.cts (_capabilityConfigSchema(cwd) + isCapabilityConfigKey/isValidConfigKey cwd threading) introduced mutable surface uncovered by config-schema's mutation test set, dropping its score to 39.58% (below the 52 break threshold). Add a real-overlay-fixture describe block exercising every branch (cwd guard, overlay loadRegistry, found-branch, first-party fallback, cwd threading); local Stryker score 39.58% -> 77.08%. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
120f85164b |
feat(#1355): detect-and-warn guard for claude-code agent-teams (#1371)
* feat(#1355): detect-and-warn guard for claude-code agent-teams GSD's multi-agent orchestration can stall under claude-code's experimental agent-teams (a subagent's completion fails to route to the orchestrator). Per the maintainer decision, the accepted scope is a read-only detector + one non-fatal warning — NOT the declined run_in_background/TaskOutput conversion. - New Teams Status Module (src/teams-status.cts → gsd-core/bin/lib/teams-status.cjs): pure resolveTeamsStatus({runtime, env}) + thin CLI cmdTeamsStatus reusing resolveRuntime. active = strictly-truthy env flag AND runtime === 'claude'. - Wire `gsd-tools query teams-status [--active]` (read-only; no capability registration needed — conformance gates govern features, not query commands). - One non-fatal warning in plan-phase.md before the first Agent spawn, gated on `query teams-status --active`; zero behavior change on non-claude/teams-off. - Hermeticity: clear CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS in run-tests.cjs + SESSION_ENV_KEYS. Docs reference + CONTEXT.md glossary. Built lib gitignored. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * chore(#1355): add changeset for teams-detect guard Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * test(#1355): bump plan-phase.md workflow size baseline (+407B for teams warning) The non-fatal agent-teams warning block added to plan-phase.md grew it 92759 → 93166 bytes, past its committed per-file baseline ratchet. The growth is small, deliberate, and still well under the workflow tier hard cap. Regenerate the baseline via `npm run size:baseline` (only plan-phase.md changed). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * chore(#1355): register teams-status.cjs in the inventory manifest The new teams-status CLI module is a tracked surface; regenerate docs/INVENTORY-MANIFEST.json (cli_modules family) via gen-inventory-manifest.cjs --write so the inventory-manifest-sync gate passes. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
22f56f4431 |
ci(#1212): shard windows full-test lane to remove timeout cliff (#1222)
The `full test (windows-latest, *)` lane ran the entire unit suite (~740+ files) in one job whose wall-clock crept against the 20m cap and intermittently CANCELLED (false-negative gate, observed on PR #1207). Prior tactical fixes #869 (15→20m bump) and #1051 (handle-leak) deferred the cliff structurally. Shard the unit suite across 3 parallel runners per OS/node leg so per-job wall-clock is O(total/3) and stays under the cap as the suite grows. - scripts/run-tests.cjs: add `--shard <i>/<n>` — a deterministic, balanced round-robin partition (fileIndex % n === i-1) over the SORTED selected file list. parseShardArg strictly validates i∈1..n, n≥1, integer-only; n=1 is a pure no-op. The 28K Windows argv chunking is preserved within each shard. A legitimately-empty shard (n > file count) exits 0; a selection empty BEFORE sharding still hits the discovery hard error. Composes with --suite and is order-independent (sorted before partition). Exports selectShard/parseShardArg. - .github/workflows/test.yml: test-full becomes the 3 legs × 3 shards = 9-job cross-product (explicit include rows — a base shard dim does not cross-product with include legs, and a nested matrix.leg.os is unresolvable by the H1 shell-policy linter). Unit suite runs sharded; integration/security run once per leg (shard 1). The Required tests fan-in is unchanged: it already needs test-full and checks the matrix-aggregate result, so a failed/cancelled shard fails the gate; the branch-protection check name is preserved. - tests: partition/CLI + pure selectShard contract (completeness, disjointness, balance, determinism, boundaries, fast-check property) + parseShardArg validation, in run-tests-harness.test.cjs; a DEFECT.GENERATIVE-FIX parity guard (per-row shard values 1..N, every leg runs all shards, N == --shard /N denominator) + Required-tests name/needs pin, in ci-test-scope.test.cjs. Closes #1212 Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Tom Boucher
|
5fa4dcd78c |
fix: recover silently-excluded test dirs + test-architecture audit hardening (#1195)
* fix: recurse test discovery so subdir test suites actually run
scripts/run-tests.cjs discovered tests with a flat readdirSync(testDir),
silently excluding tests/observability/ (4 files), tests/dispatch/ (1) and
tests/installer-migrations/ (1) — 94 passing tests — from `npm test` and all
CI lanes. Walk the tree recursively (relative subpaths preserved), classify
suites by basename, and add a fail-on-zero-executed guard for suite/default
runs (escape hatch GSD_ALLOW_EMPTY_SUITE=1) while preserving the empty
--files/--files-from path the CI inert lane relies on.
Unit suite 735 -> 741 files; surfaces ADR-227's observability/dispatch seam.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* test: retire 5 verified-worthless tests
Adversarial verification confirmed these 5 prove nothing — their coverage is
provided more strictly elsewhere:
- enh-2790 'has a name: field' spot-checks (command-contract enforces /^gsd[:-]/)
- command-routing-hub duplicate construct + duplicate ERROR_KINDS assertions
- no-cjs-sdk-handsync-tooling (guarded files that never existed on main; bug-190
covers the real retired SDK artifacts)
- runtime-artifact-layout cline edge case (subsumed by the explicit-global test
and bug-782-cline-skills-emission)
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* test: add ADR-218 release version-validation coverage
ADR-218 (reject leading-zero versions like 1.01.0; npm duplicate pre-check) had
zero tests — the logic lived only in release.yml bash. Add a test that extracts
the actual rejection regexes from the workflow and exercises them against a
boundary table (leading-zero/malformed rejected, valid accepted) plus structural
wiring assertions. Goes red if the regex is reverted to [0-9]+.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* test: redesign weak tests into behavioral, deterministic assertions
Per the ADR test audit, rewrite 27 weak test files (test-only, no source
changes) so each can go red for the defect it guards:
- kill pass-always assert.ok(true) placeholders (research-cli, worktree-baseref,
bug-260 security guard, eslint-rules x24, clusters '|| true')
- replace source-text grep with behavioral calls (install Kilo, sh-hook-paths,
plan-review-convergence) and add a repo-layout governance test
- de-flake real-clock/Math.random coupling (phase last_updated, bug-3707 mtime,
context-utilization property, feat-3594)
- fix independence/shared-state violations (bug-492 singleton, issue-844 tmpRoot,
core reapStaleTempFiles, active-workstream TTY, feat-488 GSD_HOME)
- strengthen property/shape-only tests (research-provider/store classification +
collision) and unconditional plugin.json schema validation (issue-766)
Verified: all 28 files run together 1220 pass / 0 fail / 1 skip.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* chore: add no-tautological-assert lint rule, error in test suite
New custom ESLint rule (eslint-rules/no-tautological-assert.cjs) bans asserts
that can never fail: assert(true)/assert.ok(<always-truthy literal>),
'cond || true' inside an assert, and equality asserts comparing two identical
literals. Wired as error on tests/**; full sweep confirmed zero existing
violations so the suite stays green. Prevents the placeholder-assert regressions
the audit redesigns just removed. RuleTester coverage added (6 valid, 8 invalid).
Note: no-only-tests was already enforced via eslint-plugin-no-only-tests, so no
duplicate rule was added.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* chore: gate new allow-test-rule exemptions to require an issue ref
ADR-456 requires any allow-test-rule exemption added after the ADR to carry a
tracking issue number, but nothing enforced it. New ratchet gate
(scripts/lint-allow-test-rule-refs.cjs, wired into lint:ci) fails when a NEW
allow-test-rule comment lacks a #NNN/URL reference; the 323 existing untracked
exemptions are grandfathered in an allowlist that ratchets down as they gain
refs. Red-green verified (novel untracked offender fails; compliant passes).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* docs: add ADR test-audit evidence report (#1192)
Full risk-first qa-test-architect audit of the ADR portfolio (37 ADRs + 4
platform lenses, adversarial verification of retire verdicts) that drove the
P0 discovery fix, ADR-218 coverage, 5 retires, 27 redesigns, and the two new
lint gates. Filed as point-in-time evidence under docs/issueevidence/, named
for tracking issue #1192.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* test: replace pre-existing raw NUL byte with escape in feat-3594 fixture
feat-3594's null-byte parser fixture contained a literal NUL byte (pre-existing
on next at
|
||
|
Tom Boucher
|
fd01e7a12e |
feat(#1132): complete contribution hook prerequisite
Closes #1132 |
||
|
Tom Boucher
|
4698b3e349 |
fix(#1051): force-exit + per-chunk timeout for the windows full-test lane; close leaked test handles (#1054)
The `full test (windows-latest, 22)` job intermittently got CANCELLED at its 20m wall-clock cap with no failed test step — a false-negative gate (recurrence of #869). Root cause: a unit test leaves an open event-loop handle, so the chunk's `node --test` child hangs ~150s on Windows after its last test prints; two such stalls push the already-~13m job past 20m. Fix (defense in depth): - run-tests.cjs: pass --test-force-exit (Node >=22; engines requires >=22.0.0) so the runner exits once all tests finish regardless of lingering handles — the durable backstop. Account for the flag in the argv-length ceiling. - run-tests.cjs: add a per-chunk execFileSync timeout (default 600000ms, env RUN_TESTS_CHUNK_TIMEOUT_MS) that fails loudly with a diagnostic naming the chunk's files, so a hung chunk can never silently eat the job budget. - perf-316 test: terminate both Worker threads on all paths (afterEach + finally) so they cannot outlive the test. - locking-bugs test: kill spawned children in a finally that wraps the whole spawn -> waitFor -> barrier-release -> Promise.all sequence, so a barrier timeout no longer leaks live child processes. - Refresh the stale synckit comment (synckit/SDK bridge was removed). Regression tests in run-tests-harness: a hung chunk hits the per-chunk timeout and fails with a clear message; force-exit lets a chunk with a leaked handle exit cleanly. Closes #1051 Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
adaf3e17d8 |
fix(#1001): make bug-969 hardening tests hermetic + move build tsbuildinfo out of shipped tree (regression from #996) (#1002)
* fix(#969): make bug-969 hardening tests hermetic and move build tsbuildinfo out of shipped tree (regression from #996) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * fix(#969): self-heal legacy bin-local tsbuildinfo and make sentinel test hermetic (adversarial-review follow-ups) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * chore(changeset): set pr number to 1002 * docs(#1001): record DEFECT.SHARED-ARTIFACT-MUTATION-IN-CONCURRENT-TEST anti-pattern in CONTEXT.md --------- Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
Tom Boucher
|
88e30d5342 |
test(#969): fix stale-build flake (incremental + re-emit-on-missing) and make runGsdTools retry-once before surfacing subprocess kills (#996)
Closes #969 Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> |
||
|
Tom Boucher
|
a480510f54 |
fix(#872): make roadmap-phase-fallback tests hermetic against ambient GSD env (#873)
extractCurrentMilestone reads STATE.md via planningDir(cwd), which is workstream-aware (honours GSD_PROJECT/GSD_WORKSTREAM). The fixtures write STATE.md to the plain <tmp>/.planning/STATE.md, so a developer shell inside a GSD workstream (GSD_WORKSTREAM exported) redirected the read to a non-existent workstream subdir -> version=null -> closed milestone sections leaked into the slice and assertions failed. Clean CI/Docker env never hit it. Not a Node-26 regex bug; reproduces identically on any Node with GSD_WORKSTREAM set. - scripts/run-tests.cjs: strip GSD_PROJECT/GSD_WORKSTREAM before spawning test children so the local runner env matches clean CI/Docker. - tests/roadmap-phase-fallback.test.cjs: file-level beforeEach/afterEach save/delete/restore of both vars; new regression test pinning workstream-aware STATE.md resolution. - tests/run-tests-harness.test.cjs: guard asserting the runner strips both vars (so removing the deletion fails clean CI). Closes #872 Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
f729101eec |
refactor(scripts): replace process.exit() with ExitError + runMain handler (#739) (#740)
Part 1 of 2 of the n/no-process-exit cleanup (umbrella #738): convert every process.exit() call in standalone scripts/** CLIs to the rule-compliant pattern. - New shared helper scripts/lib/cli-exit.cjs: ExitError(code,message) + runMain() which translates a thrown ExitError / returned number into process.exitCode (never process.exit()), flushing output and still firing process.on('exit'). - main()-based entrypoints: throw new ExitError(code) for errors, return <code> for verdicts; invoked via runMain(main). Child exit codes preserved via return. - top-level-only scripts: imperative body extracted into main() so mid-flow aborts (throw ExitError) actually halt; pure consts/helpers stay at module scope. - diff-touches-shipped-paths.cjs: stdin event handling restructured to an async read so the whole flow runs under runMain; uncaughtException/unhandledRejection nets replaced by an in-band catch that preserves EXIT_ERROR=2. Exit codes verified unchanged for every converted script (success/error/help and the 0/1/2 semantic codes in diff-touches). Rule stays warn here; flipped to error in part 2 (#738) once gsd-core/bin/** is also clean. Refs #739 Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
a41d8d0cf6 |
fix(#641): teach --files-from to expand bare suite tokens (#647)
When ci-test-scope falls back to the 'unit' sentinel (#408 intent) and ci-prepare-test-scope writes it verbatim, run-tests --files-from received a bare 'unit' token that was not a filename, causing exit 2 with "requested test file(s) not found: unit". selectExplicitFiles() now recognises any SUITES member and delegates to the existing selectFiles() resolver before the path-existence check, reusing the suite expansion logic rather than reimplementing it. Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
Tom Boucher
|
463cffd894 |
chore(#604): rename get-shit-done/ runtime directory to gsd-core/ (#615)
* chore(#604): rename get-shit-done/ runtime directory to gsd-core/ Renames the installed runtime directory `get-shit-done/` to `gsd-core/` so the on-disk name matches the package (`@opengsd/gsd-core`), repo, and binary (`gsd-tools`). The npm package name and binary are unchanged; npx/npm consumers are unaffected. Mechanical (bulk, ~90% of the diff): - `git mv get-shit-done gsd-core` - Swept path/identifier references across the repo via `perl -pe 's/get-shit-done(?!-\w)/gsd-core/g'`. The negative lookahead preserves the five legitimate slug variants that are NOT the directory: get-shit-done-{OLD,cc,classic,cli,redux} (old package/repo names). - Build/manifest wiring: package.json (bin, files, coverage globs), tsconfig.build.json (outDir), ~86 .gitignore build-output entries, stryker.config.mjs, scan-ignore files, install.js path strings. - Frozen (not rewritten): CHANGELOG.md history; translated docs (README.<locale>.md and docs/{ja-JP,ko-KR,pt-BR,zh-CN}/). New logic (review here): - src/installer-migrations/003-rename-get-shit-done-to-gsd-core.cts: a proper ADR-0008 installer migration. On upgrade it walks the legacy `~/.claude/get-shit-done/` tree, classifies each file via the prior install manifest, and emits remove-managed / backup-and-remove for managed files while PRESERVING unknown user-added files. Symlink-safe (skips a symlinked root and symlinked entries; bounds-checks every path under configDir). The framework rolls back on install failure. Emptied dirs may remain (framework has no recursive dir-removal primitive) — documented. - scripts/lint-legacy-dir-name.cjs: CI regression guard forbidding the bare `get-shit-done` directory token (split token to avoid self-match; case- insensitive; `(?!-\w)` lookahead allows the slug variants; allowlists CHANGELOG, translated docs, and `gsd-allow-legacy-name` marker lines). Wired into the lint-tests CI job. - Restored scripts/lint-package-identity-drift.cjs detection regexes (the mechanical sweep had wrongly rewritten the old-name patterns it exists to detect) and marked them as intentional legacy references. - TDD tests for the migration and the guard; do.md slash-command guard regex tightened so a `/gsd-core/bin` path segment is not mistaken for a command; changeset + docs/installer-migrations.md row added. Breaking: the installed runtime path moves `~/.claude/get-shit-done/` -> `~/.claude/gsd-core/`. Migration 003 removes the stale legacy dir's managed files (preserving user files) on upgrade. Users with custom hooks/configs hardcoding the old path must update them. Closes #604 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#604): unsweep pending changesets + allowlist injection-example docs CI fixes for the rename PR: - Do not sweep pending .changeset/*.md (ephemeral release-note fragments, like CHANGELOG); reverted those body edits so 5 pre-existing malformed fragments (missing type/pr) no longer enter the PR diff and trip docs-lint. Allowlisted .changeset/ in the legacy-name guard accordingly. - Allowlisted TEST-EXAMPLES.md and docs/explanation/security-model.md in prompt-injection-scan.sh: they contain intentional injection examples / security-model prose; the path-reference rewrites are kept. CodeQL alerts on this PR are pre-existing (alert lines unchanged by this PR; none in the new migration/guard) and are out of scope for the rename. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#604): resolve CodeQL alerts surfaced on this PR The rename diff touched files carrying pre-existing CodeQL findings; per the no-pre-existing-dismissal rule, fixing every surfaced alert rather than waving them off. All behavior-preserving: - scripts/ci-test-scope.cjs: build the config-path match from string .includes() instead of a RegExp over an arg-derived value (js/regex-injection). - src/profile-output.cts: escape backslashes before pipe-escaping desc/safeName so the table-cell escape is complete (js/incomplete-sanitization). - tests/{bug-2643,bug-2808,docs-parity-live-registry}: two-pass HTML-comment strip so a bare/unclosed `<!--` cannot survive (js/incomplete-multi-character-sanitization). - tests/inline-plan-threshold: drop the no-op `\s`->`\s` identity replace, keep the meaningful POSIX-class conversion (js/identity-replacement). Verified: build:lib green; the touched test files + ci-test-scope + profile-output suites pass; lint:legacy-name clean. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#604): correctly resolve remaining CodeQL alerts (regex-injection + sanitization) The prior commit's fixes for two alerts were ineffective: - ci-test-scope.cjs js/regex-injection: the alert is the CLI-arg-derived `file` reaching static regex `.test(file)` calls (not the config rule). Removed ALL regex over file/t — startsWith/includes/=== string checks + an isWindowsHint helper — so there is no regex sink for the tainted value. - js/incomplete-multi-character-sanitization (3 test files): a single `.replace(/<!--...-->/g,'')` can let `<!--` re-form. Replaced with a fixpoint loop (replace until stable) plus a final bare-opener strip. Verified: no regex over file/t remains; ci-test-scope + the 3 test suites pass; lint:legacy-name clean. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#604): make ci-test-scope + comment-strippers regex-free to clear CodeQL CodeQL flags the regex PATTERNS syntactically (regex-injection on the --files arg split; incomplete-multi-character-sanitization on the <!--...--> replace), so loop fixes do not satisfy it. Made these paths regex-free: - ci-test-scope.cjs splitFiles: char-by-char separator tokenizer (no /[,\\s]+/). - 3 test files: indexOf/slice HTML-comment stripper (no .replace(/<!--/)). Behavior preserved; ci-test-scope + the 3 suites pass; guard clean. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#604): unblock security base64 scan on the large rename diff The security job hit its 10m timeout: base64-scan.sh choked on the binary test fixture tests/feat-3594-parser-property-style.test.cjs (embedded NUL/ non-UTF8 bytes -> thousands of bogus blobs + "ignored null byte" warnings), and the ~800-file rename diff is slow to scan regardless. - scripts/base64-scan.sh: skip binary-by-content files (grep -Iq .) — they can't carry base64-obfuscated *text* and feeding NUL bytes through the per-line scanner is pathologically slow. collect_files already filtered binary *extensions*; this catches binary *content* in text extensions. - .github/workflows/security-scan.yml: raise the security job timeout 10m->30m to accommodate very large diffs (the scan itself is unchanged). Verified locally: scan skips the fixture, 0 "ignored null byte" warnings, 0 findings, exit 0. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#604): sweep get-shit-done refs introduced by merging next The branch was updated with next (#614/#384/#618 etc.), which reference the get-shit-done/ dir (still named that on next). Swept the stale references in the merged files to gsd-core so the rename stays consistent and lint:legacy-name passes: - commands/gsd/discuss-phase.md (runtime-launcher shim paths) - src/core.cts (getAgentsDir layout comments) - tests/bug-384-agents-runtime-aware.test.cjs (require path to runtime lib) Verified: guard 0 violations; build green. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#604): exclude gsd-core/ path segments from bug-3683 command cross-ref invariant The #614 runtime-launcher shim added to discuss-phase.md references `${_GSD_RUNTIME_ROOT}/gsd-core/bin/...`. bug-3683's REF_PATTERN excluded path-y refs only via lookbehind, but `}` precedes `/gsd-core/` in the shim, so it mis-read the directory path as a dangling `/gsd-core` command ref (same class as the #604 bug-2954 fix). Added a trailing `(?![\w-]*\/)` so `/gsd-<x>/...` path segments are not treated as slash-command references. Verified locally on BOTH platforms before pushing: - mac (node 26) full suite: 0 failures - gsd-test-runner (linux, node22 image) full suite: 0 failures - bug-3683 + bug-2954 pass. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#604): lazily resolve findProjectRoot in gsd-tools (harden flaky CI) CI intermittently failed state.test's gsd-tools subprocess with "findProjectRoot is not a function" (flip-flopping across legs; not reproducible on mac full suite, gsd-test linux full suite, test:unit, or state.test x8). findProjectRoot is a re-export from core.cjs (sourced from project-root.cjs); binding it via destructure at module-load can be undefined under a load-ordering edge. Resolve it lazily at call time via a small wrapper so the lookup happens after core.cjs is fully initialized. Verified green on BOTH platforms before pushing: - mac (node 26) full suite: 0 failures - gsd-test-runner (linux, node22) full suite: 0 failures - state.test.cjs: 106/106; gsd-tools loads cleanly. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#604): allowlist verification-patterns.md placeholder examples in secret scan The rename git-mv'd references/verification-patterns.md into gsd-core/, pulling it into the secret-scan diff. It documents stub/placeholder RED-FLAG env-var examples (illustrative Stripe test-key / database-URL / API-key placeholders) — not real credentials. Added it to .secretscanignore with the strict annotation, mirroring the existing gsd-core/workflows/plan-phase.md exception. Verified locally: secret-scan-lint --strict OK; secret-scan --diff origin/next exits 0 with 0 findings. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
5cd52eb151 |
enhancement(#537): pilot TS build-at-publish for bin/lib (semver-compare) (#541)
* docs(#457): rewrite ADR-457 to ground truth and accept build-at-publish The prior draft asserted a codebase state that never existed (13 tsc-generated files, src/ trees, a tests/cjs-ts-parity.test.cjs). Corrected to verified ground truth (84 bin/lib .cjs, 1 value-baked package-identity.cjs, no tsc pipeline), distinguished value-baking from transpilation so package-identity stops being miscited as precedent, made check-in-the-artifact vs build-at-publish the central decision, and flipped status to Accepted (build-at-publish). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * build(#537): pilot TS build-at-publish for bin/lib (semver-compare) First hand-written module collapsed to a TypeScript source of truth per ADR-457. src/semver-compare.cts compiles (tsc, strict, noEmitOnError) to a gitignored get-shit-done/bin/lib/semver-compare.cjs. build:lib is wired into build, pretest, pretest:coverage, and prepublishOnly so the artifact is built before test and shipped on publish. Type-aware ESLint on src/**/*.cts immediately caught the params were over-typed as `unknown` (no-base-to-string); narrowed to a honest VersionInput domain type. Behavior preserved: semver-compare.test.cjs (14) and bug-10 (4) pass against the generated output; runtime consumer changeset/cli.cjs unaffected. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#537): make build-at-publish robust across all CI paths (codex review) Adversarial review found the pilot's generated artifact would be missing on clean CI checkouts. `pretest`/`pretest:coverage` only fire for `npm test`, but CI runs `test:unit`/`test:integration`/`test:install` and `node run-tests.cjs` directly — none of which built the artifact, so any suite requiring semver-compare.cjs would hit module-not-found on a clean checkout, and install-smoke's `npm pack` could ship without it. - Add a `prepare` script (`npm run build:lib`). `npm ci` runs it automatically, so every CI test job and install-smoke's pack emit the artifact before use. This is the idiomatic npm mechanism for compiled-output-not-in-git and fixes both the test and pack paths in one place. - Add `src/` + `tsconfig.build.json` to ci-test-scope and the install-smoke / mutation path filters, so a source-only edit to a migrated module still triggers its tests and mutation coverage (prevents silent CI skips). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#537): map src/*.cts to built artifact in mutation changed-files detection Follow-up to the codex re-review. The prior commit added src/**/*.cts to the mutation workflow's path trigger but left its "compute changed core lib files" step diffing only get-shit-done/bin/lib/**/*.cjs — which are now gitignored and never appear in a diff. A source-only edit would trigger the workflow then early-exit ("no core lib files changed"), silently skipping mutation testing. Map each changed src/*.cts to its built get-shit-done/bin/lib/*.cjs path (the on-disk artifact Stryker mutates after prepare/build:lib), merge with the hand-written .cjs diff, and apply the test/excluded-module filters once. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#537): use 'src/' pathspec in mutation diff (git glob doesn't match top-level) Codex review caught that `git diff -- 'src/**/*.cts'` returns empty for a top-level file like src/semver-compare.cts — git's default pathspec glob does not match `**` across zero directories (verified on git 2.50.1). The prior commit's src-detection therefore never fired, so source-only changes still skipped mutation. Switch to the dir-scoped pathspec 'src/' + a `.cts` grep (robust for flat and nested layouts), and broaden the workflow path trigger to 'src/**' to match install-smoke. Verified end-to-end: a change to src/semver-compare.cts now resolves to get-shit-done/bin/lib/semver-compare.cjs in the --mutate list. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * chore(#537): add changeset fragment for build-at-publish pilot Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#537): replace prepare with prepack + build-if-missing; defer mutation wiring CI surfaced three real issues the local run and codex review missed: 1. lockfile-sync failed on every platform. Root cause: `npm ci --dry-run` (the repo's lockfile health check) RUNS the `prepare` script, but in dry-run the devDependencies aren't installed, so `tsc` is not found (exit 127) and the check reports a misleading "out of sync". `prepare` is the wrong hook for a build needing a devDep. Replace it with `prepack` (runs only on pack/publish, when node_modules exists) for the tarball path, and build the artifact inside scripts/run-tests.cjs (build-if-missing) for the test path — the universal chokepoint every CI test invocation funnels through, including the direct `node run-tests.cjs --files-from` step that bypasses npm lifecycle hooks. The guard is a no-op once built, so the run-tests harness test is unaffected. 2. The Stryker mutation gate ran only 1 test against semver-compare (~0% score, 71/71 mutants surviving) — a Stryker test-selection problem orthogonal to the build migration, and raising the score needs property tests (ADR-456). Revert the mutation.yml src wiring; mutation coverage for src-authored modules is a separate follow-up tracked in #537. (The deletion of the gitignored top-level .cjs does not match the workflow's `bin/lib/**/*.cjs` git pathspec, so the gate skips cleanly.) Verified: clean-room `npm ci --dry-run` exits 0; deleting the artifact then running a suite rebuilds it; run-tests harness 22/22 green; `npm pack` includes the built artifact via prepack. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
8c8887f00e |
fix(#370): scope affected-tests runner to PR suites, exclude push-only install/slow (#395)
Root cause: the affected-tests runner called runAllSuites() on critical-path changes (running every suite including install/slow on all matrix cells including Windows), and pickAffectedTests injected DEFAULT_SMOKE_TESTS (an install test) as the empty-selection fallback — causing install suite tests to run on PR lanes where they are push-only per docs/TESTING-SUITES.md. Fix: PR_EXCLUDED_SUITES filter at the pickAffectedTests chokepoint strips install/slow from every selection path (direct-change, reverse-index, stem-match). Empty selection now returns [] and the caller runs the unit suite as smoke. Critical-path fallback replaces runAllSuites with PR_FULL_SUITES (unit, integration, security). suiteOf exported from run-tests.cjs (with require.main guard) so affected-tests-lib reuses canonical detection. Fixes #370 Co-authored-by: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |
||
|
Tom Boucher
|
9dd2c87c6c |
ci: supersede #367 with combined tiered PR pipeline redesign (#369)
* ci: streamline PR pipeline gates * test: annotate ci-test-scope stderr assertions for lint rule --------- Co-authored-by: Colin <colin@solvely.net> |
||
|
Tom Boucher
|
3169d5cda6 |
fix(ci): reduce Windows test concurrency 4→2 to prevent synckit worker exhaustion on Node 24 (#173)
Under Node 24 on Windows, running node --test with --test-concurrency=4 causes 4 concurrent gsd-tools subprocesses to each spawn a synckit worker_threads worker for the SDK bridge. The 4 workers simultaneously contend on SharedArrayBuffer + Atomics.wait under Windows Defender scanning and NTFS latency, triggering OS-level resource exhaustion that kills worker processes with empty stderr before any output is flushed. The symptom: intermittent exit 1 with 0 test failures, varying affected test files per run, all sharing the pattern of invoking gsd-tools as a subprocess. Empty stderr distinguishes OS crash from gsd-tools app error (the error() path writes to stderr before exiting). Fix: platform-aware concurrency default — 2 on win32, 4 on Linux/macOS. The existing TEST_CONCURRENCY env-var override is preserved. Also adds a [stderr: (empty) exit:N] diagnostic note in helpers.cjs runGsdTools catch block so future empty-stderr crashes are visible in CI logs. Fixes gsd-build/get-shit-done#3869 Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
Tom Boucher
|
7fa5eb7e63 |
fix(3597): resolve CR threads — drop substring-assertion guidance, use $testDir
Two CodeRabbit threads from PR #3649 review: - docs/TESTING-SUITES.md:75 — removed the "stable message substring" fallback from the error-assertion guidance. Project rule (per the no-source-grep lint and lint-no-source-grep.cjs) is structured/typed checks only — err.code, JSON fields, enums. Substring matching re-introduces the exact prose-coupling we banned. - scripts/run-tests.cjs:106 — the "no test files found" error now reports the resolved testDir variable instead of the hardcoded 'tests/' string, so when GSD_TEST_DIR points elsewhere the message names the actual directory the harness searched. Local: docker gsd-test-summary 11224/0 on holodeck. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |
||
|
Tom Boucher
|
52f23ac0a0 |
fix(3597): chunk node --test spawn to survive Windows CreateProcess limit
Windows CreateProcess caps lpCommandLine at 32,767 chars. The original `execFileSync(node, ['--test', ...546 paths])` exceeded that on every Windows runner and exited within ~70ms with no test output. Linux/macOS allow ~2 MB ARG_MAX so the same call worked there. `scripts/run-tests.cjs` now splits selected files into chunks that keep each spawn's argv under 28,000 chars (operator-overridable via RUN_TESTS_MAX_CMDLINE_CHARS), runs them sequentially, and reports the first non-zero exit. Cross-platform regression test forces chunking with a low ceiling and asserts the `run-tests: chunk N/M …` stderr marker. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com> |
||
|
Tom Boucher
|
e82876fe45 |
feat(3597): split test suites and add Node 22/24/26 OS matrix
scripts/run-tests.cjs gains `--suite <name>` filtering using a filename
suffix convention (`*.security.test.cjs`, `*.integration.test.cjs`, …).
Files with no marker are `unit` (the default fast lane); files with a
marker land in the matching suite. No `--suite` flag preserves the prior
behavior of running every test (backcompat for `npm test` and
`npm run test:coverage`).
New package scripts wire the suites to stable entrypoints:
test:unit, test:integration, test:install, test:security, test:slow,
test:coverage:unit, test:coverage:all. Unknown suite → exit 2 with the
list of valid suites; empty suite → exit 0 with a stderr notice so empty
lanes (e.g. `security` before adversarial tests land) don't gate CI.
CI matrix grows from `ubuntu × {22,24}` + a single macOS lane to
`{ubuntu, macos, windows} × {22, 24, 26}`. `fail-fast: false` so one
lane failure doesn't cancel siblings. Node 26 is `continue-on-error`
until actions/setup-node stabilises that image. PR CI runs unit +
integration + security on every cell; `install` and `slow` only on
`main` push. A dedicated `coverage` job runs `test:coverage:unit` on
ubuntu/Node 24 and uploads the report.
Grouping policy lives in docs/TESTING-SUITES.md with a pointer from
CONTRIBUTING.md. New harness test covers arg parsing, filter selection,
empty-suite behavior, and failure propagation.
Closes #3597.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
|
||
|
Tom Boucher
|
2703422be8 |
refactor(tests): standardize to node:assert/strict and t.after() per CONTRIBUTING.md (#1675)
* refactor(tests): standardize to node:assert/strict and t.after() per CONTRIBUTING.md
- Replace require('node:assert') with require('node:assert/strict') across
all 73 test files to enforce strict equality (no type coercion)
- Replace try/finally cleanup blocks with t.after() hooks in core.test.cjs
and hooks-opt-in.test.cjs per the test lifecycle standards
- Utility functions in codex-config and security-scan retain try/finally
as that is appropriate for per-function resource guards, not lifecycle hooks
Closes #1674
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* perf(tests): add --test-concurrency=4 to test runner for parallel file execution
Node.js --test-concurrency controls how many test files run as parallel child
processes. Set to 4 by default, configurable via TEST_CONCURRENCY env var.
Fixes tests at a known level rather than inheriting os.availableParallelism()
which varies across CI environments.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(security): allowlist verify.test.cjs in prompt-injection scanner
tests/verify.test.cjs uses <human>...</human> as GSD phase task-type
XML (meaning "a human should verify this step"), which matches the
scanner's fake-message-boundary pattern for LLM APIs. This is a
false positive — add it to the allowlist alongside the other test files
that legitimately contain injection-adjacent patterns.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
|
||
|
Lex Christopherson
|
02a5319777 |
fix(ci): propagate coverage env in cross-platform test runner
The run-tests.cjs child process now inherits NODE_V8_COVERAGE from the parent so c8 collects coverage data. Also restores npm scripts to use the cross-platform runner for both test and test:coverage commands. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
Lex Christopherson
|
ccb8ae1d18 |
fix(ci): cross-platform test runner for Windows glob expansion
npm scripts pass `tests/*.test.cjs` to node/c8 as a literal string on Windows (PowerShell/cmd don't expand globs). Adding `shell: bash` to CI steps doesn't help because c8 spawns node as a child process using the system shell. Use a Node script to enumerate test files cross-platform. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> |