`gsd-tools effort sync` crashed in every installed runtime (e.g. ~/.claude/gsd-core/)
with `Cannot find module '../../../bin/install.js'`: cmdEffortSync (src/commands.cts)
required the package-root bin/install.js for its install-time effort resolvers, but the
installer only copies the gsd-core/ subtree into a runtime home — bin/install.js is never
present there. So `effort` config changes silently never reached installed agents without
a full reinstall (exactly the gap #488 was meant to close). 4th instance of the recurring
"runtime code under gsd-core/ requires a file outside the shipped subtree via ../../../"
anti-pattern (#1223/#1920/#1383 were the prior three, all already mitigated).
Fix (ADR-457 direction — extract, single source): move readGsdEffectiveEffortConfig +
resolveInstallTimeEffort (with their _getGsdEffortCatalog + _readGsdConfigFile helpers)
out of the hand-authored bin/install.js into a new src/install-effort-resolver.cts that
compiles into the shipped gsd-core/bin/lib/install-effort-resolver.cjs. commands.cts now
requires it as a sibling (`./install-effort-resolver.cjs`) — always present in the
installed tree — instead of `../../../bin/install.js`. bin/install.js imports the same four
symbols back from the new module (it still calls them + re-exports them), so there is one
source of truth and no duplication/drift. The lazy manifest read is repointed from the
package-root layout (`.., gsd-core, bin, shared`) to the bin/lib layout (`.., shared`).
Scope note: this is one of four instances of the anti-pattern; the other three are already
shipped/guarded. A build-time guard rejecting new cross-boundary requires whose target isn't
in the installer copy manifest (to prevent instance #5) is recommended on the issue but kept
out of this fix.
Tests: tests/effort-sync-installed-runtime.test.cjs does a real minimal install into a temp
home (the golden-parity helper) and runs the issue's exact repro
(`gsd-tools effort sync --config-dir <temp>`), asserting no MODULE_NOT_FOUND for
bin/install.js. Fail-first verified: against pristine next the same test throws
`Cannot find module '../../../bin/install.js'` at cmdEffortSync; post-fix it syncs cleanly.
New module registered in .gitignore (ADR-457), eslint ignores, docs/INVENTORY.md +
INVENTORY-MANIFEST.json. bin/install.js is not shipped and the new module is under bin/lib
(excluded from golden parity), so no golden fixtures change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
model_overrides / models.<phaseType> were silently inert for gsd-assumptions-analyzer,
gsd-code-reviewer, and gsd-code-fixer on Claude Code: resolveModelInternal honors them,
but the workflows spawned these agents with no model= param, so the resolved value
never reached the Agent tool and the agents inherited the session model — no warning.
Fix — thread each agent's resolved model at every spawn site (the established
plan-phase pattern; the architecture-consistent Claude mechanism, since 13 other
agents already thread their model):
- discuss-phase-assumptions.md: `resolve-model gsd-assumptions-analyzer --raw`
→ ANALYZER_MODEL, threaded.
- code-review.md + code-review-fix.md (re-review): `resolve-model gsd-code-reviewer --raw`
→ REVIEWER_MODEL, threaded.
- code-review-fix.md (both fixer spawns): `resolve-model gsd-code-fixer --raw`
→ FIXER_MODEL, threaded (same silently-inert bug, same file — folded in per review).
- quick.md review step: was reusing `{executor_model}` for gsd-code-reviewer (so the
reviewer's own override was ignored); init.quick now resolves `reviewer_model`
(gsd-code-reviewer) and the spawn threads it.
resolve-model --raw returns the bare model string (resolve-execution --raw would
return effort — wrong). The resolver maps these agents to phaseType discuss /
verification / execution, so models.<phaseType> apply too.
Scope: the three agents reachable from the two issue-named workflows + quick.md. The
wider systemic class (other agents in UNTOUCHED workflows with the same pattern) stays
documented on the issue for a maintainer-scoped structural decision (thread-at-source
vs embed-at-install like #2256), not widened here.
Docs: the stale "discuss — reserved, no subagent today" model-profile tables now list
gsd-assumptions-analyzer and the verification row includes gsd-code-reviewer, across
the English docs, the shipped gsd-core/references/model-profiles.md reference, and the
ja-JP / zh-CN / ko-KR / pt-BR locale mirrors.
Tests:
- tests/model-resolver.test.cjs: #2072 acceptance — model_overrides and
models.discuss/verification/execution resolve for all three agents.
- tests/model-routing-spawn-threading.test.cjs: every spawn of the three agents threads
a resolved model (fails pre-fix); a header-precise parity guard fails the suite if a
new un-threaded spawn of any of them regresses.
All 16 golden-install-parity fixtures + the workflow size baseline regenerated for the
changed shipped files (4 workflows + the reference doc); bin/lib is excluded from parity.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Full API Coverage by Default — Opt Out, Never Opt In. A phase that integrates
an external API/SDK/service can no longer seal without a decided coverage matrix.
- src/api-coverage.cts: deterministic detector (compound verb+noun signal +
<Service> API/SDK surface; stopword-guarded; strips fenced code) + matrix
parse/validate/render with field-length caps.
- check api-coverage.verify-pre: blocking seal-time gate; phase arg resolved as
a token under .planning/phases/ only (traversal-neutralized); validates
COVERAGE.md or blocks iff a strong integration signal is detected and no
matrix exists; fail-closed when phases tree exists but phase unresolvable.
- capabilities/ai-integration: workflow.api_coverage_gate config key (default
true), plan:pre contribution, blocking verify:pre gate. Data-driven.
- gsd-core/workflows/verify-work.md: generic verify:pre gate dispatch.
- Tests: detector FP/FN + matrix validation + fast-check bijection; gate e2e.
Code+security review findings fixed (stopword FP, scope containment, pipe/cap
rejection, prompt-injection message hygiene).
- Regenerated registry/matrix/loop-host-contract/goldens/baseline + docs.
Closes#1562
Two code-confirmed defects in `gsd-tools phase complete` (re-verified against
next; the three severe corruption paths the issue filed are superseded by the
ADR-1769 Transition Module migration + #2012, so this is the confirmed remainder).
1. Milestone-end mislabel (isLastPhase). The milestone-end determination only
cleared isLastPhase when a HIGHER-numbered phase existed, so completing the
numerically-highest phase out of order (e.g. Phase 10 before Phase 9) stamped
STATE.md `Status: Milestone complete` while a lower phase was still outstanding.
Added a lower-phase check: after the existing higher-phase scans, if any earlier
phase in the current milestone has an unchecked roadmap checkbox (`[ ]`),
isLastPhase becomes false AND next_phase/next_phase_name point at the LOWEST
outstanding lower phase — so STATE.md advances to the real gap instead of
parking on the just-completed phase. A completed phase always has `[x]`
(phase.complete sets it), so all-lower-complete still reports milestone-end;
heading-only roadmaps (no checkboxes) retain prior behavior. The checkbox regex
mirrors the sibling phasePattern's anchoring (whitespace/bold + required `:`) so
unrelated checklist lines mentioning "Phase N" don't match.
2. Workstream root-fallback (no guard). cmdPhaseComplete resolves every path via
planningDir(cwd); with a `workstreams/` dir present but no active workstream and
no --ws, that returns root `.planning`, so phase.complete wrote STATE.md/
ROADMAP.md (and the mislabel) into the shared root other workstreams read.
Added the same #1912 fail-safe guard init.progress got: refuse (asking for
`--ws`/active workstream) instead of silently writing root. Resolution itself
was already wired globally (resolveActiveWorkstream: --ws > GSD_WORKSTREAM >
pointer, set in bin/gsd-tools.cjs), so only the refusal guard was missing.
The workstream-mode detection (`listAvailableWorkstreams`) is extracted into
planning-workspace.cts as the single source of truth and consumed by BOTH
init.progress and phase.complete, so the two fail-safe paths cannot drift.
Tests (tests/phase.test.cjs, new #2028 describe): out-of-order completion becomes
`Ready to plan` with is_last_phase=false, next_phase pointing at the outstanding
phase and Current Phase advancing to it (not the completed phase); all-lower-
complete still reports milestone-end; workstream-mode-no-active refuses with an
`--ws` hint; `--ws` completes in the workstream leaving root untouched; flat mode
unaffected. Fail-first verified locally via direct gsd-tools invocation.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A GSD verification gate resolves a project's test command and runs it. vitest
defaults to WATCH mode in an interactive TTY — exactly where a user runs
`gsd-execute-phase` — so a resolved `npm test`/`pnpm test` backed by vitest never
exited and the orchestrator waited indefinitely. Recovery needed the user to
manually prompt "something blocking?".
Fix — one shared helper + a bounded, surfacing timeout on the test-command gates:
- New pure module src/normalize-test-command.cts + `gsd-tools query
normalize-test-command` verb: rewrites a resolved command to a best-effort
one-shot form (direct vitest → `vitest run`; jest `--watch` → `--watchAll=false`;
a package-manager `test` script whose package.json runner is watch-vitest →
`CI=true` prefix; handles `--dir`; already-one-shot commands unchanged —
never double-flagged). Named `normalize-test-command` (not `test-*`) so the
file does not match node --test's default `test-*` discovery glob.
- The three gates that HUNG or silently-continued route through that ONE helper
and bound execution with `timeout $(config-get workflow.test_gate_timeout)`
(new config key, default 600s): the regression gate (extracted to
execute-phase/steps/regression-gate.md since execute-phase.md is size-frozen —
it shrank 93528→93132; ABORTS on exit 124), the post-merge gate, and the
audit-fix gate (previously an UNBOUNDED `eval`). All name watch/dev mode on 124.
- verify-phase's gate was ALREADY bounded (a fixed `timeout 300`, not a hang), so
it only gains the normalizer (so a watch runner exits fast) + a watch-mode hint
on 124, staying under its frozen 40960-byte tier cap.
Security hardening (review): the normalizer only rewrites a runner named as a
standalone command TOKEN (so `run-vitest.js`/`make test-vitest`/paths are never
mangled), is length-capped and uses only linear-time split-based scanning (no
super-linear backtracking on an adversarial `workflow.test_command`), and reads
package.json only when it is a regular file (never blocks on a FIFO via `--dir`).
Config key `workflow.test_gate_timeout` (seconds, default 600) registered in the
schema manifest + templates/config.json + docs/CONFIGURATION.md (mirrors
workflow.cross_ai_timeout). New module registered in .gitignore, eslint ignores,
inventory manifest/index. All 16 golden-install-parity fixtures + workflow size
baseline regenerated for the changed shipped files; bin/lib is excluded from the
parity manifest.
Tests: tests/normalize-test-command.test.cjs (normalizer units incl. security
hardening) and tests/test-gate-watch-mode.test.cjs (the three core gates route
through the shared helper + configured timeout + exit-124 watch-mode hint;
verify-phase asserted as normalize-only/already-bounded).
tests/execute-phase-active-flags.test.cjs repointed at the extracted step;
tests/planner-language-regression.test.cjs allowlist comment updated.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A phase whose slug's first word is a bare single digit (dir
`46-6-rs-pipeline-orchestrator`, roadmap phase "6 Rs Pipeline Orchestrator" →
slug `6-rs-…`) had its phase token over-collected as `46-6` instead of `46`, so
`gsd-tools` phase-by-number lookups (init.plan-phase, init.phase-op, and
downstream execute/verify/ship) resolved phase_dir=null / has_context=false.
Root cause: an over-broad "looks numeric" test (`/^\d/`, `\d+(?:-\d+)*`)
classified token segments and could not distinguish a legitimate zero-padded
sub-phase segment (`01`, `02`) from a single-digit slug word (`6`). Zero-padded
phase/sub-phase segments are always ≥2 digits, so requiring ≥2 digits is the
structural distinguisher. Applied consistently across every same-class
implementation the triage identified (fixing extractPhaseToken alone leaves the
health-check and milestone-filter subsystems exposed):
- src/phase-id.cts extractPhaseToken — a pure-numeric leading segment continues
only with ≥2-digit segments; a letter-prefixed milestone id (`M1`) still
admits its single-digit sub-phase (`M1-2`).
- src/validate.cts PHASE_TOKEN_FROM_DIR_RE (W005/W006/W007 health checks) and
canonicalPlanStem (I001 plan/summary pairing).
- src/roadmap-parser.cts isDirInMilestone numericRe (getMilestonePhaseFilter —
highest blast radius: a false negative silently excludes a phase from the
milestone).
- src/core-utils.cts + its verbatim duplicate src/phase.cts extractCanonicalPlanId.
Regression tests added across tests/{phase-id,health-validation,core-utils,
roadmap-parser}.test.cjs using the shared `46-6-rs-…` fixture, asserting the
token resolves to `46` (not `46-6`) while legit multi-segment tokens
(`01-02`, `02-03-04`, `M1-2`, `68-01`, `02-01`) are unchanged. The
roadmap-parser test exercises the real getMilestonePhaseFilter end-to-end.
The residual ≥2-digit-leading-slug case (e.g. `NN-2024-roadmap`) stays out of
scope — subsumed by the #612 / #565 phase-ID convention work, per the issue.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
`gsd-tools config-set <key> null` — the "Clear" action documented in
settings-integrations.md / settings-advanced.md — previously fell through the
value parser as the literal STRING "null" and persisted it. Consequences:
"cleared" keys stayed set (config-get returned truthy "null"), and for secret
keys (brave_search/firecrawl/exa_search) a masked success line hid a truthy
4-char value on disk that integrations could pass along as a real credential.
There was also no unset/delete verb at all.
Fix: parse a bare `null` to JS null and short-circuit to a real UNSET that
DELETES the key from config.json — the semantic the docs already describe
("Remove the stored key" / "remove the key by setting it to null"). Deleting
(not persisting JSON null) is the correct clear: a persisted null is still a
present value consumers must special-case.
- src/config.cts:
- parse block: `else if (val === 'null') parsedValue = null;`
- cmdConfigSet: when parsedValue === null, short-circuit BEFORE the typed
per-key validator gauntlet (so clearing an enum/boolean/number key removes
it rather than being rejected) and before the project_code special-case;
mask the previous value for secret keys in the output.
- new `unsetConfigValue()` + `_unsetNestedValue()` mirroring setConfigValue/
_setNestedValue: same prototype-pollution guard, but never creates missing
intermediates and never prunes empty parents; returns { previousValue,
existed }. Unsetting a never-set key is an idempotent no-op success.
- tests/config.test.cjs: new suite covering non-secret routing key, secret key,
typed-enum-key bypass (context), idempotent unset, literal-"null"-on-disk
guard, the unset-path prototype-pollution guard (alert #26 parity), and a
4-segment deep-nested unset.
- tests/review-model-config.test.cjs: update the stale round-trip test that
codified the bug (asserted config-set null → config-get returns "null") to the
fixed contract — the model key is removed; the review workflow's
`[ -n "$VAR" ] && [ "$VAR" != "null" ]` guard handles the empty read as
"no override → reviewer default", same as the old "null" sentinel.
The 4 documented "Clear" flows (settings-integrations.md, settings-advanced.md)
were verified — their prose already describes removal, so the fix makes them
accurate rather than aspirational; no doc wording change required.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Kilo and ZCode both declare `hooksSurface: 'none'` and have no plugin surface,
so the GSD installer staged lifecycle hook scripts (hooks/*.js, hooks/*.sh,
hooks/lib/) plus a `{"type":"commonjs"}` package.json marker into their config
dirs where nothing ever invokes them — dead weight (#1821).
The installer's two hook-copy guards at bin/install.js were still on the legacy
hardcoded runtime-name list and never excluded Kilo or ZCode. Add
`&& !isKilo && !isZcode` to both (isZcode added to the install() runtimeFlags
destructure).
OpenCode — which #1821 also named — is deliberately NOT excluded: since the
issue was filed, #1914 shipped a native OpenCode plugin (plugins/gsd-core.js)
that spawns those exact staged hooks via OpenCode's event bus and requires both
the hook scripts and the CommonJS package.json marker. Excluding OpenCode would
regress #1914, so its hooks stay live. The genuinely-dead cases are Kilo & ZCode.
- bin/install.js: add `&& !isKilo && !isZcode` to the hooks/dist copy guard and
the hooks/lib copy guard; document the OpenCode-vs-Kilo/ZCode split.
- tests/install-minimal-hooks.test.cjs: regression test asserting Kilo and ZCode
receive no gsd-*.js/.sh hooks or hooks/lib, while OpenCode keeps its hooks +
#1914 plugin and Claude keeps its hooks (over-exclusion guard).
- tests/fixtures/golden-install-parity/{kilo,zcode}.json: drop the 21 hooks/*
entries and the package.json marker they no longer receive (opencode unchanged).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A skills-only role:feature third-party capability installed 'active' but its skills never reached the runtime surface, capability enable/set rejected it as 'unknown capability', and capability list disagreed with capability state. Three defects, fix shape 1b (teach resolveSurface, no on-disk linking):
D1 (materialization): resolveSurface built the surfaced skills Set only from the on-disk manifest; third-party cap skills live at ~/.gsd/capabilities/<id>/skills/ and never entered the Set -> surfaced:false. Fix: union registry.capabilityClusters values into the Set in the full-profile branch (idempotent for first-party, additive for third-party; prototype-pollution guarded).
D2 (enable/set unknown): setCapabilityState validated the capId against the static first-party registry instead of the composed overlay-aware registry. Fix: validate against loadRegistry({includeInstalled}) like capability-state.cts does.
D3 (list vs state): capability list derived status purely from ledger existence, never surface composition. Fix: add a 'surfaced' field to list rows sourced from the same resolver capability state uses, so list and state agree.
Regression coverage: tests/issue-2045-third-party-skills-surface.test.cjs asserts all five acceptance criteria (resolveSurface union, state surfaced:true, enable/set not-unknown, list/state agreement, first-party + unknown-id regression). gsd-test: 23916/23916 green (linux-node22 + linux-node24).
- Teach applySurface to build agentCtx (pathPrefix + attribution) and pass it
to kind.stage() for agents kind, mirroring createRuntimeArtifactInstallPlan
(ADR-1235 §1). Surface-path agents now receive path-rewrite + attribution +
converter + normalize, matching install output byte-for-byte.
- Pass skills:'*' sentinel for agents staging when no surface state modifications
exist, so ALL agents are staged (not just those referenced by _calls_agents_).
- Declare converted agents kind in copilot and antigravity capability.json;
add to _DESCRIPTOR_AGENTS_RUNTIMES in bin/install.js.
- Handle copilot .agent.md filename rename in both _copyStaged (install path)
and _syncGsdDir (surface path).
- Ship golden-parity harness (ADR-1235 §0): tests/issue-1575-agent-descriptor-
parity.test.cjs asserts applySurface output is byte-identical to
installRuntimeArtifacts for all 7 descriptor-driven runtimes, plus stale-
cleanup convergence and prune data-loss coverage.
- Update ADR-1235 with cutover progress.
Cline remains deferred (rules-only local branch + local/global complication).
Add ZCode as a first-party runtime via a declarative capability descriptor
(capabilities/zcode/capability.json) with zero hardcoded runtime === 'zcode'
branches — exercising the de-hardcoded, data-driven runtime path that 1.7.0
(ADR-1016 / ADR-1239) enables.
Descriptor (all axes sourced verbatim from zcode.z.ai docs):
- configHome ~/.zcode; nested skills + flat commands/agents; profile-marker install
- Claude-shaped skill format reuses convertClaudeCommandToClaudeSkill (no new converter)
- hostIntegration: declarative / slash-file / mcp / electron; dispatch background=false
(foreground-only per docs); nested+maxDepth undocumented; passive model mode
Installer registration (data, not branches): --zcode flag, allRuntimes, runtimeMap,
interactive menu, --all list. getGlobalConfigDir + resolveRuntimeArtifactLayout +
ALLOWED_CONFIG_RUNTIMES + resolveInstallPlan all derive from the descriptor.
Revamped the brittle per-runtime golden-master tests to be count-agnostic,
descriptor-derived property tests (1.7.0 makes runtimes pluggable data, so pinning
frozen '15 runtime' snapshots is the wrong invariant): getdirname, label-policy,
config-adapter-registry (intent + install-plan golden master), capability-registry,
host-integration-descriptors (counts derive from curated maps). Adding a runtime
descriptor now extends coverage with zero edits to those suites.
Welcome banner, --zcode help, supported-runtimes how-to, and the host-integration
capability matrix (every axis cited) updated.
The compiled gsd-core/bin/lib/*.cjs modules are gitignored build artifacts
(ADR-457) shipped prebuilt in the npm tarball. A Claude Code plugin-marketplace
/ git-clone install materializes the repo tree directly and never runs
`npm run build:lib`, so those ~148 files are absent and every CLI command dies
at load with `Cannot find module './lib/cli-exit.cjs'`.
gsd-tools.cjs now calls ensureRuntimeBuild() before its ./lib requires: a new
committed bin helper that compiles the tree once on demand (lock-guarded,
incremental-cache-cleared, portable `node <tsc>` invocation) when the sentinel
cli-exit.cjs is missing, and surfaces an actionable error when TypeScript is
unavailable. The already-built npm path is a single fs.existsSync no-op.
ADR-457 (gitignored, build-at-publish) is preserved; no release-pipeline change.
Verified against a simulated marketplace checkout (148 build outputs removed):
the CLI self-heals and the result is byte-identical to `npm run build:lib`.
Closes#2002
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
* fix(#2012): scope Progress-row regex to ## Progress section (was binding to earlier table)
The Progress-row writer used a non-global regex that matched ANY table row
starting with the phase number. When an earlier table (e.g. Requirements
coverage | Phase | Requirements | Count |) preceded ## Progress, the regex
bound to the wrong row (3-column), no-op'd, and never reached the real
Progress row. roadmap_updated stayed true (it's existsSync), masking the
failure.
- src/phase.cts: scope the tableRowPattern regex to the ## Progress section
(indexOf + slice) so it only matches Progress-table rows.
- tests/phase.test.cjs: regression test — ROADMAP with a phase-numbered
Requirements table before ## Progress → Progress row updated, Requirements
row untouched.
Closes#2012
* docs(#2012): backfill changeset pr 2032
* fix(#2018): applySurface empty manifest no longer deletes gsd-* agents
The agent-prune loop in _syncGsdDir deleted any gsd-*.md not in the staged
set. When the manifest resolved empty (null/non-object, no entries, no files
key, or unresolvable install source root), the staged set was empty → every
gsd-* agent was deleted. Skills were guarded by pruneSkillDirs' manifest-
membership check; agents had no equivalent.
- src/surface.cts: skip the agent-prune loop when the manifest is empty/absent
(copy still runs — genuinely new agents are added).
- tests/surface-empty-manifest-agents.test.cjs: boundary matrix — empty
manifest preserves agents (Map() + undefined); non-empty manifest + empty
staged still prunes (boundary); empty manifest + new staged copies new +
preserves existing.
Closes#2018
* docs(#2018): backfill changeset pr 2031
* fix(#2017: grant mcp__plugin_context7_context7__* for plugin-marketplace context7
The 8 context7-using agents granted only mcp__context7__* (standalone server
form). Claude Code's plugin-marketplace context7 install names tools
mcp__plugin_context7_context7__*, so the grant never matched and every
researcher/planner/executor silently lost doc lookup (fell back to WebSearch).
- 8 agents: add mcp__plugin_context7_context7__* alongside mcp__context7__*.
- scripts/research-profiles.cjs: update the researcher profile tools to match.
- tests/context7-plugin-grant-parity.test.cjs: regression guard — no agent
grants the standalone form without the plugin form.
Closes#2017
* docs(#2017): backfill changeset pr 2029
* fix(#2022): gate roadmap update-plan-progress checkbox on verification passed
cmdRoadmapUpdatePlanProgress stamped the phase checkbox + completion date
the moment all summaries landed, with NO verification gate — unlike
cmdPhaseComplete (phase.cts:1436) which checks readVerificationStatus. Since
update-plan-progress is called after every wave and every plan, the checkbox
fired before gsd-verifier confirmed the phase.
- src/roadmap.cts: isComplete now requires summaryCount >= planCount AND
readVerificationStatus(phaseDir).status === 'passed'.
- tests/roadmap.test.cjs: 2 regression tests (no VERIFICATION.md → not
complete; gaps_found → not complete) + updated 3 existing complete tests
to include a passed VERIFICATION.md.
Closes#2022
* docs(#2022): backfill changeset pr 2030
* fix(#2020): remove dead SDK file refs that triggered infinite find.exe on Windows
gsd-executor.md referenced sdk/src/query/QUERY-HANDLERS.md and reapply-patches.md
referenced sdk/dist/cli.js — both retired with the SDK (ADR-0174). AI runtimes
that locate doc refs via filesystem search ran find /, which on Git Bash for
Windows traverses the whole drive (14h+, orphaned find.exe, 4M+ handles).
- agents/gsd-executor.md: drop dead QUERY-HANDLERS.md ref.
- workflows/reapply-patches.md: drop dead sdk/dist/cli.js clause.
- tests/no-dead-sdk-refs.test.cjs: regression guard — no sdk/src|dist|handlers
file refs in agents/workflows/references markdown.
Closes#2020
* docs(#2020): backfill changeset pr 2027
