06845717fe
* test(#4740): pin the per-step role-family partition Failing-first coverage for the Loop Host Contract role partition. At this commit crossCheckRoleFamilies does not exist, so the rows throw "crossCheckRoleFamilies is not a function" -- the RED proof they bind to behavior rather than restating it. ADR-894 section 3 assigns roles per step but parenthesises the assignment as "(illustrative roles)", and nothing enforced it. The only thing standing in the way was a single deepEqual in this same file, which is editable prose. Rows cover: each step's own family accepted; a strict subset accepted; a foreign role rejected at every step; an unknown role rejected; an unknown step failing CLOSED; capitalization not silently matched; every offending role reported rather than only the first; and purity, because buildContract puts the same array into the generated contract. Two rows exist because an earlier cut of this suite was vacuous. The purity fixture is deliberately UNSORTED -- an alphabetically-sorted fixture cannot fail an in-place sort(), and the mutant was being killed by three unrelated rows instead. A parity row asserts ROLE_FAMILY and ROLE_TO_AGENT cover the exact same role-name domain, both directions: they are parallel constants over one domain, so divergence is the generative-fix class CLAUDE.md names. Every negative row asserts the offending ROLE NAME and the STEP NAME appear in the message. A count-only assertion survives a mutant that reports the wrong role, which the 80% Stryker gate would surface only after a full CI round-trip. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * feat(#4740): reject a cross-family agent-role declaration Orchestration and execution are distinct functions of the loop and must not drift into one another. That partition was real but unenforced: ADR-894 section 3 calls its own role assignment "illustrative", and the generator accepted anything. Adding orchestrator to execute-phase.md's agent-roles line compiled, --check passed once regenerated, and capability-validator.cjs then began accepting into:"orchestrator" at every execute point. ROLE_FAMILY maps every role to one of orchestration, planning or execution. EXPECTED_FAMILY_BY_STEP gives each of the five steps exactly one family. crossCheckRoleFamilies rejects a cross-family role, a role outside the vocabulary, and an unknown step. It reports every offender, not the first. It fails CLOSED on an unknown step, deliberately diverging from assertPointsCoverage's "unknown step -- caught elsewhere". For points that is true: the canonical-set and duplicate checks catch it. For roles there is no second net, so failing open would leave an unknown step as the one input that bypasses the gate. crossCheckRoles' orchestrator exemption is untouched. ROLE_TO_AGENT maps roles to agent FILES and the orchestrator is the host, owning none -- admissibility and agent-file presence are separate concerns with separate checks. Additive to section 3's existing rule that contribution.into must be a member of the step's agentRoles, which is unchanged. That governs what a CAPABILITY may target; this governs what a WORKFLOW may declare. No capability is affected, and all five workflows already declare single-family sets, so the gate is green on the commit that introduces it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * docs(#4740): make the ADR-894 role assignment normative Section 3 parenthesises its per-step role assignment as "(illustrative roles)". That word was accurate about the list's PURPOSE -- it illustrated the shape of a generated contract entry -- and wrong about its STATUS, because the assignment was load-bearing from the moment the generator consumed it. Read literally it makes the partition an example rather than a rule. Appended as a dated in-place section per docs/contributor-standards.md, which records that an accepted ADR is never rewritten and names this the default pattern. Section 3's original body is untouched. The amendment states the three disjoint families, the one family each step admits, that a step may declare a strict subset but never outside it, and why this is a clarification rather than a new decision: the contract is generated from the workflow markers "so it cannot drift into a lie", and all five workflows have always declared single-family sets. What was absent was any statement that it is required, and any check that it holds. It also pins the distinction that is easy to re-merge: contribution.into being a member of agentRoles governs what a CAPABILITY may target and is unchanged; the family rule governs what a WORKFLOW may declare. The CONTEXT.md glossary entry for the Loop Host Contract records the same, beside the agent-reference drift guard it already documented. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * chore(#4740): add changeset fragment pr:0 placeholder is backfilled with the real number once the PR exists. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * chore(#4740): backfill changeset pr number Replaces the pr:0 placeholder with 4742 now that the PR exists. Verified with GITHUB_BASE_REF=next, the way CI runs them: changeset lint and lint:docs both go from invalid_pr(0) to ok. Without that env both report success without evaluating the branch at all. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(#4740): stop injecting the orchestrator procedure into executors claude-orchestration declared a contribution at execute:wave:pre with into:"executor". loop-hook-dispatch.md defines a contribution as "inject fragment.inline verbatim into the context for the role named in into", so its 267 lines were injected into EXECUTOR prompts whenever the capability was enabled. Those lines are orchestration end to end -- construct a wave manifest, resolve the dispatch backend, invoke the Workflow tool to spawn executors, bridge per-agent results into the merge chain. An executor can act on none of it. Retargeting to into:"orchestrator" would not have been a fix. ROLE_TO_AGENT carries no orchestrator entry by design: the orchestrator IS the host, and the host's procedure lives in execute-phase.md. A step's agentRoles enumerates agents a capability may inject context INTO, so adding orchestrator there would model the host as an injectable agent -- the same category error pointed the other way, and it would need an exception carved into the partition the same issue just made normative. So the defect is the mechanism, not the label. A contribution injects into an agent's context; "replace step 3's inline dispatch loop" is a change to what the HOST does. The contribution channel was serving as a host-behaviour directive because it was the only channel available at an execute point. The entry is removed. plan:post into:"planner" is correct and untouched. The procedure is preserved verbatim at docs/workflow-backend-dispatch.md inside the capability -- it is the only copy in the repo -- and is no longer injected anywhere. Consequence, not softened: the Workflow backend now has no loop wiring. Detection, emission and config remain and the design is intact, but nothing dispatches it. Under the separation ADR-1143 itself asserts it never had a legitimate channel; ADR-1143's own audit already records the end-to-end path has never been exercised. Wiring it properly needs a host-level mechanism that does not exist today. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> * fix(#4740): invert the stale execute:wave:pre registry assertions Removing the contribution left four surfaces asserting or describing the old state. Caught by an isolated review before a verification run was spent, which is the point of reviewing first: the first of these was a guaranteed CI red. execute-wave-post-gate-pipeline-e2e asserted against the REAL generated registry that byLoopPoint['execute:wave:pre'] held exactly one contribution with capId claude-orchestration. It now holds zero. Inverted to assert exactly 0 -- not a vague >= 0 -- and the #2285 comment above it now explains the current state rather than the one it was written for. CONTEXT.md's Claude Orchestration entry claimed two contributions at wired points. It is now one, and the entry's execute:wave:post label was already wrong before this change: the manifest said execute:wave:pre. Rewritten to one plan:post contribution, why the execute-point one was removed, and where the procedure now lives. One assertion in claude-orchestration.test.cjs could not fail. It tested for the prose "(into the executor)" while the doc says "(`into: executor`)", so no plausible wording matched it and the paired plan:post assertion was carrying the row. Replaced with a check on the structural claim, and proved RED by restoring the two-contribution wording before reverting. The moved procedure keeps section headings that speak as a live contribution -- "When this contribution is active", "Why execute:wave:pre". Preserving the body verbatim was deliberate, so the headings stay and an editor's note under the header explains why they read that way. A sweep of all 17 files referencing byLoopPoint found no further siblings: the remaining hits are a synthetic capability fixture and an empty-points test that already expected no active hooks, both correct before and after. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> --------- Co-authored-by: sim <sim@local> Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
74 lines
3.9 KiB
JSON
74 lines
3.9 KiB
JSON
{
|
|
"id": "claude-orchestration",
|
|
"role": "feature",
|
|
"version": "1.14.0",
|
|
"title": "Claude orchestration (Workflow backend)",
|
|
"description": "Default-off, BETA, claude-only capability that adopts Claude Code's Workflow tool (the engine behind /effort ultracode) as an optional parallel-execution backend for the GSD loop. When the runtime exposes the Workflow tool and claude_orchestration.execution_backend resolves to 'workflow', execute-phase emits a generated Workflow script (waves -> parallel() barriers, plans -> agent({ agentType: 'gsd-executor', isolation: 'worktree' }), files_modified overlap -> separate sequential stages, resumeFromRunId wired to the phase run id, shared token budget) that composes the SAME gsd-executor agent and worktree isolation the inline path uses, restoring the wave parallelism the #853 backgrounded-agent nesting limitation forces inline on Claude Code. (The plan-checker and verifier remain inline until separately wired — this capability delivers the parallel-execution backend, not those gates.) Also folds the ultraplan plan-offload under one runtime gate (plan:* surface). On any runtime lacking the Workflow tool, or when the capability is disabled, behaviour is byte-identical to today (inline/manual dispatch). Detection + emission live in gsd-core/bin/lib/claude-orchestration.cjs (pure, fail-closed). Mirrors the existing gsd-ultraplan-phase BETA-isolation posture.",
|
|
"tier": "full",
|
|
"requires": [],
|
|
"engines": {
|
|
"gsd": ">=1.7.0"
|
|
},
|
|
"runtimeCompat": {
|
|
"supported": [
|
|
"claude"
|
|
],
|
|
"unsupported": []
|
|
},
|
|
"skills": [],
|
|
"agents": [],
|
|
"hooks": [],
|
|
"commands": [
|
|
{
|
|
"family": "claude-orchestration",
|
|
"module": "claude-orchestration-command-router.cjs",
|
|
"router": "routeClaudeOrchestrationCommand",
|
|
"subcommands": [
|
|
"detect-backend",
|
|
"emit-workflow",
|
|
"resolve-wave-dispatch"
|
|
]
|
|
}
|
|
],
|
|
"activationKey": "claude_orchestration.enabled",
|
|
"config": {
|
|
"claude_orchestration.enabled": {
|
|
"type": "boolean",
|
|
"default": false,
|
|
"description": "Master toggle for the Claude orchestration capability. Default-off + BETA: the Workflow-tool execution backend and the ultraplan plan-offload surface are inert unless this is true. When false, loop behaviour is byte-identical to a non-Claude runtime (inline/manual dispatch)."
|
|
},
|
|
"claude_orchestration.execution_backend": {
|
|
"type": "enum",
|
|
"values": [
|
|
"auto",
|
|
"workflow",
|
|
"inline"
|
|
],
|
|
"default": "auto",
|
|
"description": "Which execute-phase dispatch backend to use when the capability is enabled. 'auto' (default) activates the Workflow backend only when the runtime is Claude AND the Workflow tool is detected AND the Agent SDK meets claude_orchestration.min_agent_sdk_version; otherwise it falls back to inline. 'workflow' forces the Workflow backend when the tool is present AND the Agent SDK meets the floor (still fails closed to inline if the tool is absent or the SDK is too old — the floor applies in both modes). 'inline' forces today's manual one-agent-per-message dispatch regardless of tool availability."
|
|
},
|
|
"claude_orchestration.min_agent_sdk_version": {
|
|
"type": "string",
|
|
"default": "0.3.149",
|
|
"description": "Minimum Agent SDK version required to activate the Workflow backend under execution_backend='auto'. Defaults to 0.3.149 (the release that introduced the Workflow tool). Raise to pin a higher floor; the detection seam fails closed to inline for any runtime reporting an older or unknown version."
|
|
}
|
|
},
|
|
"steps": [],
|
|
"contributions": [
|
|
{
|
|
"point": "plan:post",
|
|
"into": "planner",
|
|
"fragment": {
|
|
"path": "fragments/plan-post.md"
|
|
},
|
|
"produces": [],
|
|
"consumes": [
|
|
"CONTEXT.md"
|
|
],
|
|
"when": "claude_orchestration.enabled",
|
|
"onError": "skip"
|
|
}
|
|
],
|
|
"gates": []
|
|
}
|