msd-core/docs/how-to/plan-a-phase.md

How to plan a phase

Goal: Turn phase decisions and research into an atomic, verifiable task plan ready for execution.

Prerequisites: .planning/ROADMAP.md exists. A {phase}-CONTEXT.md from /gsd-discuss-phase is strongly recommended but not required.

---

Run the standard planning flow

/gsd-plan-phase 2

This runs three stages in sequence:

1. Research — A gsd-phase-researcher subagent investigates the domain and writes {phase}-RESEARCH.md.
2. Plan — A gsd-planner subagent reads context, research, and requirements, then writes one or more {phase}-{N}-PLAN.md files.
3. Verify — A gsd-plan-checker subagent validates plan quality across eight dimensions and triggers a revision loop (up to three iterations) until quality gates pass.

If no phase number is given, GSD Core targets the next unplanned phase from the roadmap.

---

Skip or force research

If the domain is familiar and you do not need new research:

/gsd-plan-phase 3 --skip-research

If RESEARCH.md already exists but you want to force a refresh:

/gsd-plan-phase 3 --research

If you want to run research only — write RESEARCH.md and exit before planning:

/gsd-plan-phase --research-phase 4

If RESEARCH.md already exists, you are prompted to update, view, or skip. To force-refresh without the prompt:

/gsd-plan-phase --research-phase 4 --research

To print existing RESEARCH.md to stdout without spawning the researcher:

/gsd-plan-phase --research-phase 4 --view

Note: --research-phase <N> is a flag on /gsd-plan-phase. There is no standalone research-phase command — the removed standalone research command was retired in favour of this flag.

---

Override the planning granularity for one phase

If you want fewer, larger tasks for a simple or well-understood phase:

/gsd-plan-phase 2 --granularity coarse

If you want more, smaller tasks for tighter control over a risky or complex phase:

/gsd-plan-phase 2 --granularity fine

--granularity accepts coarse, standard, or fine. It overrides all granularity config keys (granularities.planning, granularity, planning.granularity) for this invocation only — no config edit required. Invalid values are rejected immediately with an error.

If you want this granularity applied permanently, set it in config — see CONFIGURATION.md. For the full flag reference see COMMANDS.md.

---

Plan vertical feature slices instead of horizontal layers

If you want tasks organised as thin end-to-end slices (UI → API → DB per feature) rather than by technical layer:

/gsd-plan-phase 1 --mvp

On Phase 1 of a new project with no prior phase summaries, --mvp also produces SKELETON.md — a Walking Skeleton covering project scaffold, routing, one real DB read/write, one real UI interaction, and dev deployment.

You can persist MVP mode for a phase without the flag by adding **Mode:** mvp to that phase's entry in ROADMAP.md.

---

Require a failing test per behaviour-adding task

If you want TDD enforcement — each behaviour-adding task begins with a failing test before implementation:

/gsd-plan-phase 1 --tdd

Composable with --mvp:

/gsd-plan-phase 1 --mvp --tdd

This produces vertical slices where every behaviour-adding task follows RED → GREEN → REFACTOR. The planner applies type: tdd to eligible tasks (business logic, API endpoints, data transformations) and uses standard type: execute for UI, configuration, and glue code.

TDD mode can also be persisted in config:

node gsd-tools.cjs config-set workflow.tdd_mode true

---

Replan using cross-AI review feedback

If you have run /gsd-review --phase N and a REVIEWS.md exists:

/gsd-plan-phase 3 --reviews

The planner reads REVIEWS.md and revises plans to address the feedback. Cannot be combined with --gaps.

If you want an automated loop — replan and re-review until no HIGH concerns remain:

/gsd-plan-review-convergence 3

The convergence loop runs plan → review → replan → re-review cycles (up to three by default). Use --max-cycles N to override the cap.

---

Close gaps after a failed verification

If VERIFICATION.md exists with unresolved gaps and you want to replan against those gaps only:

/gsd-plan-phase 3 --gaps

Research is skipped; the planner reads the verification gaps directly.

---

Validate project state before planning begins

/gsd-plan-phase 2 --validate

Runs state validation before spawning the researcher. Use this if you suspect ROADMAP.md or STATE.md has drifted.

---

Run an external bounce validation after planning

If workflow.plan_bounce_script is configured and you want external validation of the finished plan:

/gsd-plan-phase 1 --bounce

To skip bounce even if it is enabled in config:

/gsd-plan-phase 1 --skip-bounce

---

Suppress interactive confirmations

/gsd-plan-phase --auto

Skips all prompts. Useful in automated pipelines. Research is skipped if research_enabled is false in config.

---

What the plan produces

A successful run writes:

File	Purpose
{phase}-RESEARCH.md	Domain research, package legitimacy audit, validation architecture
{phase}-VALIDATION.md	Nyquist test-mapping — the test cases the plan must satisfy (Dimension 8)
{phase}-{N}-PLAN.md	Executable task plan with frontmatter, wave assignments, and acceptance criteria
{phase}/SKELETON.md	Walking Skeleton (MVP mode, Phase 1 of new project only)

Each PLAN.md contains tasks with mandatory <read_first> and <acceptance_criteria> fields. Every <acceptance_criteria> entry is verifiable as a source assertion, behaviour assertion, test command, or CLI output — never subjective language.

For the full field reference see PLAN.md schema.

Plan quality dimensions

The gsd-plan-checker validates plans across eight dimensions before allowing execution:

1. Task atomicity — each task is a single concern
2. Dependency correctness — wave ordering is consistent
3. Acceptance criteria verifiability — no subjective criteria
4. <read_first> completeness — the file being modified is always listed
5. Concrete <action> values — no vague "align with" instructions
6. must_haves derived from phase goal
7. Requirement ID coverage — every phase requirement ID appears in at least one plan
8. Nyquist test mapping — plans address the validation strategy in VALIDATION.md

The revision loop runs up to three times. If quality gates have not passed after three iterations, the checker surfaces remaining issues for manual review.

---

Replanning a closed phase

If a phase has VERIFICATION.md with status: passed, it is considered closed. Attempting to replan it stops with an error. If the closeout was incorrect, override with --force:

/gsd-plan-phase 2 --force

A warning is emitted into the transcript and any committed plan docs.

---

Related

• Discuss a phase
• Execute a phase
• PLAN.md schema
• Commands