msd-core/capabilities/claude-orchestration/fragments/execute-wave-pre.md

Claude orchestration — Workflow execution backend (BETA)

Injected at execute:wave:pre into: executor only when claude_orchestration.enabled is true. Default-off; onError: skip.

When this contribution is active

The Claude orchestration capability is default-off and BETA. It activates only when ALL of the following hold:

1. claude_orchestration.enabled is true in .planning/config.json, AND
2. the active runtime is Claude Code (the Workflow tool is Claude / Agent SDK-specific), AND
3. claude_orchestration.execution_backend resolves to workflow — either explicitly, or via auto — and the Agent SDK version is >= claude_orchestration.min_agent_sdk_version (default 0.3.149). The SDK floor applies in both auto and workflow modes (fail-closed: a pre-release or older SDK never activates the preview backend).

Detection is fail-closed: any miss degrades to inline, manual, one-agent-per- message dispatch — exactly today's behaviour. On a non-Claude runtime this contribution is a no-op.

Why execute:wave:pre (not execute:wave:post)

This is a dispatch-backend selector — it decides HOW a wave's executor agents are spawned. That decision has to be made BEFORE the wave's Agent() calls in execute-phase.md step 3, not after the wave has already finished (#2285). The capability previously registered at execute:wave:post, which fires only after worktree merge/post-merge tests/tracking updates — by then the wave was already dispatched inline, so the contribution was structurally unable to change how dispatch happened. This fragment is injected at the point that actually precedes dispatch.

What the orchestrator does when the Workflow backend is active

Before spawning executor agents for the current wave (execute-phase.md step 3), resolve the dispatch backend through the single composed CLI seam:

gsd-tools claude-orchestration resolve-wave-dispatch \
  --waves "$WAVE_MANIFEST_PATH" --run-id "$PHASE_RUN_ID" \
  --runtime "$RUNTIME" \
  --phase-dir "$PHASE_DIR" --raw

--agent-sdk-version is no longer passed here (#2590). The router resolves the installed Agent SDK version itself; see Agent SDK version below. The former ${AGENT_SDK_VERSION:+--agent-sdk-version "$AGENT_SDK_VERSION"} line was also shell-dependent: zsh does not word-split unquoted parameter expansions, so it collapsed to a SINGLE argv element there, argValue() never matched, and the run failed into agent_sdk_version_unknown — indistinguishable from genuinely unknown. Pass --agent-sdk-version <ver> explicitly only to pin a version.

This composes detectWorkflowBackend (the gate ladder above) with emitWorkflowScript (the wave→plan mapping below) in ONE call — the pure function backing it is resolveWaveDispatch in gsd-core/bin/lib/claude-orchestration.cjs. Response shape: { backend: 'inline'|'workflow', reason, script?, summary? }.

Manifest construction ($WAVE_MANIFEST_PATH, $PHASE_RUN_ID, $PHASE_DIR)

These are NOT pre-existing execute-phase.md variables — the orchestrator builds them at this step, from data it already has in-context from discover_and_group_plans (the PLAN_INDEX JSON) and step 2.5 (the per-plan USE_WORKTREES_FOR_PLAN decision):

1. $PHASE_DIR — reuse {phase_dir} from the INIT bundle (already loaded in the initialize step). No new value needed.

2. $PHASE_RUN_ID — a stable identifier for THIS phase-execution attempt, so resumeFromRunId can resume an interrupted run without re-dispatching plans the Workflow tool already completed. Construct it deterministically — execute-{phase_number}-{phase_slug} — from INIT's phase_number/phase_slug (both are already validated identifiers used elsewhere in this workflow, so they satisfy emitWorkflowScript's isScriptableIdentifier check). Do NOT mint a new random id per wave — the SAME $PHASE_RUN_ID is reused for every wave in the phase so the Workflow tool can correctly track cross-wave resume state.

3. $WAVE_MANIFEST_PATH — a fresh temp file for THIS wave's manifest (one wave = one waves array with a single entry, matching the wave-by-wave dispatch loop; do not batch multiple waves into one manifest — waves are dispatched in wave order, not all at once):

   WAVE_MANIFEST_PATH=$(mktemp "${TMPDIR:-/tmp}/gsd-wave-dispatch-XXXXXX") && mv "$WAVE_MANIFEST_PATH" "$WAVE_MANIFEST_PATH.json" && WAVE_MANIFEST_PATH="$WAVE_MANIFEST_PATH.json"
   

   Then use the Write tool (not a bash/jq pipeline — the orchestrator already has every field parsed in-context) to write the manifest JSON to $WAVE_MANIFEST_PATH:

   {
     "waves": [
       {
         "id": "wave-{N}",
         "plans": [
           {
             "id": "{plan_id}",
             "brief": "{the SAME <objective>...<success_criteria> prompt block step 3 builds for this plan's inline Agent() call}",
             "files_modified": ["{from PLAN_INDEX.plans[].files_modified for this plan}"],
             "use_worktree": {true unless step 2.5 set USE_WORKTREES_FOR_PLAN=false for this plan}
           }
         ]
       }
     ]
   }
   

   • id — the plan id from PLAN_INDEX, e.g. "01-01".
   • brief — MUST carry the same task content as step 3's inline Agent() prompt (the <objective>/<execution_context>/<files_to_read>/ <success_criteria> block, with {plan_number}/{phase_number}/ {phase_name} substituted) — a short summary here would NOT reproduce step 3's behavior and would violate the "identical artifacts" contract.
   • files_modified — copy verbatim from the plan's PLAN_INDEX entry.
   • use_worktree — true for every plan UNLESS step 2.5's per-plan worktree gate (execute-phase/steps/per-plan-worktree-gate.md) set USE_WORKTREES_FOR_PLAN=false for that plan (submodule-touching plan, or project-level USE_WORKTREES=false) — in which case pass false here so emitWorkflowScript omits isolation: "worktree" for that plan (#2772 / #2285 finding 1). Never hardcode true — that would force worktree isolation on a plan the inline path explicitly keeps out of worktrees.

4. $AGENT_SDK_VERSION — no longer built here; the router resolves it.

Agent SDK version: the orchestrator has no bash-computable way to introspect the live Agent SDK version — but the router runs in Node, so it resolves the version itself (#2590), in this order:

1. an explicit --agent-sdk-version <ver> (pin a version),
2. GSD_AGENT_SDK_VERSION,
3. the installed @anthropic-ai/claude-agent-sdk package version, read from its package.json on disk by walking node_modules up the tree. (Read directly rather than via require.resolve: the SDK's exports map does not expose ./package.json, so require.resolve throws ERR_PACKAGE_PATH_NOT_EXPORTED.)

Previously nothing computed this at all, so gate 5 returned agent_sdk_version_unknown on every automated run and the Workflow backend could never activate — while gsd-tools capability state still reported the capability active: true. Fail-closed is preserved: when no version can be resolved, gate 5 still declines to inline. What changed is that a resolvable version is now actually found, so a genuinely-too-old SDK reports agent_sdk_version_below_floor — the truthful reason — instead of unknown.

If backend == "workflow": run the emitted script via the Workflow tool for THIS wave instead of the per-message Agent() loop in step 3. The script composes the SAME gsd-executor agent type the inline path uses, with worktree isolation applied PER PLAN from the manifest's use_worktree field (see emitWorkflowScript):

• waves → one or more sequential parallel() barriers — each wave is a barrier group; when plans within a wave share files_modified, they are split into separate sequential stages within that wave's barrier.
• plans → agent(brief, { agentType: 'gsd-executor', isolation: 'worktree' }) when use_worktree is not false, or agent(brief, { agentType: 'gsd-executor' }) (no isolation) when it is — so the produced SUMMARY.md and commits are identical to inline dispatch, INCLUDING the inline path's submodule safety gate (#2772 / #2285 finding 1).
• files_modified overlap → separate sequential stages — the same overlap rule execute-phase already applies inline (step 1 of the wave loop).
• resumeFromRunId — pass summary.resumeRunId as the Workflow tool's resumeFromRunId INPUT when you invoke the tool. It is a tool parameter, not a script function; the script deliberately does not call it (#2590 — doing so threw "resumeFromRunId is not defined" and rejected the entire script). Omitting it from the tool invocation silently regresses phase-resume to a no-op: an interrupted phase re-runs completed plans.

The orchestrator still runs steps 4–5.8 (wait for completion, worktree cleanup, post-merge gate, tracking update) exactly as it does for inline dispatch — the Workflow backend only replaces HOW agents are spawned for this wave, not what happens after they return.

If backend == "inline" (any gate miss, or resolve-wave-dispatch itself unavailable/erroring): proceed to step 3's standard per-message Agent() dispatch — the default, byte-identical-to-today path. onError: skip on this contribution means a resolve-wave-dispatch command failure is treated exactly like an inline result, never as a fatal wave error.

Fallback contract

Detection is fail-closed end-to-end: capability disabled, non-Claude runtime, execution_backend:"inline", missing/incapable host descriptor, unknown or below-floor Agent SDK version, or an emitWorkflowScript failure on a malformed wave manifest — ANY of these degrades to backend:"inline" and execute-phase's standard inline dispatch (step 3) runs unmodified. The Workflow backend never partially activates; the executor MUST NOT assume parallelism, a shared budget, or resume-from-run-id semantics when backend == "inline".