6140627f5c5d8a994b1625805efa90b47e82003a
294 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Tom Boucher
|
448e148058 |
fix(#2455): abort remaining chunks when one hits the per-chunk timeout (#2465)
The per-chunk timeout exists so a bad chunk fails loudly 'rather than silently burn the job's wall-clock budget until the CI runner cancels the whole job' (run-tests.cjs:633-637). The control flow defeated that: after a timeout kill the loop fell through to the next chunk. Since the timeout (600000ms) is half the 20m job cap and a healthy Windows full pass is ~11m42s, continuing after a timeout can essentially never finish. Observed on run 29749380190 (windows shard 2/3): chunk 1/5 was killed at exactly 600s, the loop pressed on through chunks 2-4, and the job was cancelled mid-chunk-5 at the 20m wall. The failure surfaced as '##[error]The operation was canceled.' — the timeout diagnostic ended up ~38,000 log lines from the end and 'gh run view --log-failed' returned nothing, making the real cause very hard to find. Abort the remaining chunks on a timeout so the diagnostic survives as the visible failure. Ordinary test failures still run every chunk, so the operator keeps seeing all failures in one pass. Fixes #2455 Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
953b8043ea |
fix(#2456): weight test chunks by measured cost and pack with LPT (#2463)
* fix(#2456): weight test chunks by measured cost and pack with LPT scripts/run-tests.cjs guessed each test file's cost from its filename (basename matching /^(?:install|codex-)/ scored 12, everything else 1). Measured durations show that guess is wrong in both directions: installer-migration-authoring.test.cjs scored 12 while running ~0.1s, and the two most expensive files in the suite both scored 1 — run-tests-harness.test.cjs never matched the prefix, and release-tarball-smoke.install.test.cjs was missed because the regex is anchored to the START of the basename. Chunks were therefore balanced by file COUNT, not cost. On the real shard 2/3 the two heaviest files packed into the SAME chunk, leaving the slowest chunk 2.8x the lightest and sitting near the 600s per-chunk timeout while other chunks idled. Weight each file by its measured duration from a checked-in, regenerable timings table and pack with LPT (heaviest first, into the lightest chunk). On the same shard this drops the slowest chunk from 383s to 238s and the imbalance from 2.79x to 1.00x, and separates the two heavy files. Timings are advisory, never gated: an unknown file falls back to the table's median weight, a missing or corrupt table falls back to uniform weight, and a count-based floor guarantees the packer never produces fewer chunks than plain count-based packing would. Closes #2456 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2456): harden chunk packing against degenerate knobs and table keys Follow-up hardening found while reviewing the packer, fixed inline. The chunk knobs are read from the environment with Number(), so a typo (RUN_TESTS_MAX_FILES_PER_CHUNK=abc) yields NaN and an explicit 0 yields 0. Both flow into the new chunk-count arithmetic: NaN made Math.ceil return NaN, Array.from({length: NaN}) produce zero bins, and packChunks' retry loop spin forever — a hung CI job with no output. Zero made the count Infinity and threw RangeError: Invalid array length. The previous count-based packer degraded to a single chunk instead, so this was a regression introduced by the LPT rewrite. Normalize the knobs at the environment boundary (positiveNumberEnv: anything not a positive finite number falls back to the default) and guard packChunks itself, since it is exported and cannot assume its caller normalized. Non-finite weights from an arbitrary weightOf are clamped too. RUN_TESTS_CHUNK_TIMEOUT_MS gets the same treatment. Also resolve timing-table lookups with Object.hasOwn: the table is JSON-parsed, so a bare index would walk the prototype chain and return a function for a file named constructor.test.cjs or toString.test.cjs. The typeof guard already rejected that, but the lookup now resolves correctly rather than relying on the downstream check. Refs #2456 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2456): correct prototype-lookup rationale and guard generator keys Two findings from independent security review, fixed inline. The makeFileWeigher comment claimed a bare table lookup "would return a FUNCTION for a file named constructor.test.cjs". That premise is false: basename('constructor.test.cjs') is 'constructor.test.cjs', which is not an Object.prototype key, and walkTestFiles only ever collects *.test.cjs. The prototype chain was never reachable from a real selection, and the existing typeof guard already rejected the function it would return, so Object.hasOwn is defense-in-depth rather than a behavior change. The comment now says that instead of asserting something untrue. The accompanying test inherited the same false premise: it fed constructor.test.cjs and asserted a median fallback that would have held with or without the guard, so it passed for a reason unrelated to what it claimed to prove. It now uses BARE keys (constructor, toString, valueOf, hasOwnProperty, __proto__) — the only inputs that actually resolve on Object.prototype — and asserts the real exported contract: any key absent from the table weighs the median, never a function. gen-test-timings.cjs built its output object by computed-key assignment from basenames taken out of a reporter stream it does not control — the js/prototype-polluting-assignment shape, and this repo has a CodeQL barrier for exactly that pattern. It was not exploitable (the value is always a rounded number, so the __proto__ setter is a silent no-op), but it silently DROPPED such an entry rather than reporting it. Validate every key against a test-basename pattern and fail loudly instead, and build the table with a null prototype. Refs #2456 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2456): replace tautological chunking tests and clamp chunk count Six findings from independent correctness review, all reproduced and fixed inline. The two subprocess tests written to carry the #2088 guarantee forward were tautological: every seeded file weighed exactly 1, so both passed under the OLD prefix-heuristic packer and with the timings file deleted entirely. Neither could fail for the reason it existed. Both are rebuilt so the old algorithm produces a different packing and the assertion goes red: the spread test now uses three expensive files named so the old heuristic scored them 1 alongside three trivial `install-`-prefixed files it scored 12 — inverted from real cost, giving {2,2,1,1} under the old packer versus {2,2,2} under measured weights. The companion test covers the other direction: four trivial `install-` files the old heuristic split into four single-file chunks now stay in one. packChunks clamped the chunk count from below but not above, so a legitimate but tiny budget (RUN_TESTS_MAX_FILES_PER_CHUNK=1e-9, which positiveNumberEnv accepts) asked for 637,000,000,000 bins and threw RangeError. More chunks than files is never useful; the count now clamps at one file per chunk. The generator's basename-collision guard compared full dirnames, so two OS lanes reporting the same file under different container roots (/work/tests vs C:/work/tests) flagged every shared basename as a collision — on the script's own documented multi-lane usage. Detection is now scoped per stream, where the root is constant; a genuine same-lane collision is still caught. Also: the LPT tie-break compared raw paths, so a path separator (0x2F vs 0x5C) could order a subdir file differently per platform, contradicting the documented byte-identical guarantee — it now normalizes separators. loadTestTimings now honors schema_version instead of writing it and never reading it, falling back to uniform weight on an unknown version. A comment claiming an all-uniform suite "chunks exactly as it did before" was false and contradicted by this PR's own test: the chunk count is preserved, the composition is not. And the missing-table test created a temp dir it never cleaned up, for a path that only needed to not exist. Refs #2456 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
d0bacc2517 |
fix(#2351): replace hardcoded timeout with portable run-with-timeout (#2426)
* fix(#2351): replace hardcoded gnu timeout with portable run-with-timeout Stock macOS ships neither `timeout` nor `gtimeout` (GNU coreutils). The 10 hardcoded `timeout <n> <cmd>` calls across the workflow/agent/reference gates exited 127 ("command not found") on such hosts, and the gates — which only distinguish 0/124/other — misreported a passing build or test as a FAILURE. Fix: a single Node-based `gsd_run run-with-timeout <secs> [--] <cmd…>` verb in gsd-tools.cjs. Coreutils-independent (stock macOS AND Windows), keeps GNU `timeout`'s exit-code contract (124 timeout, passthrough, 127/126 ENOENT/EACCES, 128+signum on signal), inherits stdio so pipes/redirects work, and reaps the whole process group so a watch-mode runner cannot outlive its budget. Runs before gsd-tools' flag parsing so the wrapped argv stays opaque. Hardened per adversarial review: - On timeout, SIGKILL the group SYNCHRONOUSLY before resolving — a descendant that traps SIGTERM was otherwise orphaned holding stdout, hanging captured gates (the exact watch-mode hang the feature prevents). - Forward SIGINT/SIGTERM to the child tree instead of dying and orphaning it. - Reject blank/whitespace <seconds> (was a silent unbounded run); clamp the timer to the 32-bit setTimeout ceiling (was a spurious immediate timeout). - Lint detector: catch GNU long options / `-k5` / `$((...))`; anchor to command position so prose "timeout 30 seconds" no longer false-positives. Resolution lives once in the CLI; all 10 sites call the shared verb. A parity guard (scripts/lint-portable-timeout.cjs, wired into lint:ci) fails the build if a bare `timeout`/`gtimeout` execution reappears (the portable `command -v timeout` probe form is intentionally allowed). Also fixes the identical bug in the zh-CN checkpoints translation, updates the tests that asserted the old strings, trims a redundant phrase in gsd-verifier.md to keep it under its size hard cap, and refreshes the size baselines + golden install-parity fixtures. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * chore(#2351): add changeset (#2426) * chore: regenerate golden/size baseline after rebase onto next --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
f2c077df38 |
chore(#2387): refactor CONTEXT.md legacy content + add glossary drift gate (#2391)
* chore(#2387): refactor CONTEXT.md legacy content + add glossary drift gate Apply the audit-and-enforce concept from the ADR index (#2356) to CONTEXT.md: correct stale facts, and add a CI gate so the machine-verifiable claims can't silently re-rot. CONTEXT.md was entirely hand-maintained with nothing checking its claims against the shipped tree, so it had rotted. An audit against live code (Memtrace + filesystem + gh), each finding adversarially re-verified, drove 38 factual corrections + 1 surfaced by the new gate: - Dead references: Package Identity named @opengsd/get-shit-done-redux (package is @opengsd/gsd-core); Shell Command Projection named run-git/run-npm/run-tool (real exports execGit/execNpm/execTool); a partial docs/adr/1606 ref; retired sdk/ framing. - Superseded facts: allRuntimes 15 -> 17 (pi #2102, zcode); "seven nested-loader runtimes" -> five (claude reverted flat #924, antigravity flat); stacked-PR examples rebasing onto main -> next; QUOTA_SENTINELS precedence corrected to match src/agent-command-router.cts. - Drifted CONTRIBUTING.md line citations refreshed. Per CONTRIBUTING.md:179, only stale FACTS were corrected -- no maintainer intent, lesson, or opinion was rewritten, and the append-only session log is untouched except one dated in-place superseding note. The three tests that assert on CONTEXT.md content (phase6-capstone-conformance, tracer-bullet, external-job-waiting) keep all their anchors. New scripts/check-glossary-refs.cjs (--check, wired into lint:generated-sync): - Check A: every backticked file reference under a TRACKED_PREFIXES allowlist resolves on disk. Generated gsd-core/bin/lib/*.cjs (77 refs, gitignored), ~/-paths, .planning/, and bare filenames are deliberately skipped so a clean CI checkout never false-fails. - Check B: the allRuntimes count + member set in the glossary prose match bin/install.js's allRuntimes literal (drifts on every runtime addition). tests/check-glossary-refs.test.cjs covers both, including the false-positive guard that a missing bin/lib/*.cjs ref does NOT trip the gate. Closes #2387 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2387): confine glossary-gate file refs to ROOT (no `..` traversal) Pre-PR security review finding (low): extractTrackedRefs fed tokens straight to fs.existsSync(path.join(ROOT, token)), and PATH_TOKEN_RE admits `.` in a segment, so a CONTEXT.md token like `src/../../../etc/passwd` passed the `src/` prefix check and normalized to an out-of-tree absolute path — turning the doc lint into a filesystem-existence oracle on the CI host (existsSync only; CONTEXT.md is a trusted committed file, hence low severity, but a defense-in-depth gap). Add isWithinRoot() confinement in extractTrackedRefs: a token is dropped unless path.resolve(ROOT, token) stays within ROOT. A CONTEXT.md reference is always a plain in-repo path, so a `..` escape is never legitimate. Regression test asserts a `..`-bearing token is skipped and never named in output. Refs #2387 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2387): drop legacy `get-shit-done` name from a CONTEXT.md defect entry CI lint-legacy-dir-name failed: the line-928 upstream-issue re-point I applied wrote the historical provenance as "gsd-build/get-shit-done#3545", and scripts/lint-legacy-dir-name.cjs forbids the legacy `get-shit-done` name. Reword to "moved from #3545 in the predecessor repo" — same provenance, no legacy name. Caught by `npm run lint:ci` (the CI lint chain), which I had not run locally — lint:generated-sync + eslint do not include lint-legacy-dir-name. Refs #2387 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
dcb4954131 |
fix(#2335): normalize volta node image paths to the stable shim (#2375)
Adds a volta branch to normalizeNodePath() that rewrites the version-pinned node image path to volta's stable shim, so managed hooks survive a volta node prune (the fnm/Homebrew/mise class, now covered for volta). Also unifies the release-smoke install timeout into one shared 600s constant across before() and runSmoke() so slow benches no longer spuriously time out. Closes #2335. Admin-merged (self-review bypass) with full green CI. |
||
|
Tom Boucher
|
67a9243cf1 |
chore(#2356): make the ADR index a generated artifact and enforce ADR lifecycle invariants (#2367)
* chore: rebuild ADR index as a generated artifact and enforce lifecycle invariants
The ADR index in docs/adr/README.md was hand-maintained with nothing checking
it, and had drifted to 40 of 65 ADRs. The absent rows included the entire
capability family (857/894/959/1016/1143/1213/1244) and ADR-1239 (EoS) itself,
so the decisions a reader most needed were the ones they could not find.
Make the index a derived artifact, matching the repo's existing generated-file
idiom (lint:generated-sync), and enforce the corpus' lifecycle invariants:
- scripts/gen-adr-index.cjs generates the index between markers and validates
the status vocabulary (Accepted/Proposed/Superseded/Legacy/Retired),
successor links, id/filename agreement, and supersession symmetry.
- Wire --check into lint:generated-sync so drift fails CI.
Correct the lifecycle metadata the gate surfaced, without flipping any status:
- ADR-1239 (EoS) declared it subsumed ADR-1016/58/3660/894; none recorded it.
Add reciprocal "Subsumed by" pointers + dated amendments. Subsumption keeps
the target Accepted -- these are live adapters, not dead decisions.
- ADR-857/894 carry dated status caveats: they read Proposed while the
capability system shipped and epic #857 is closed. Ratification is a
maintainer act and is deliberately left open.
- Link ADR-0005/0007/0012/3524 -> ADR-0174 and ADR-0010 -> ADR-0009; record
the reciprocal Supersedes on ADR-0009.
- ADR-218 declared itself "ADR-0175" -- an unfinished rename.
- The 0011 PRD moves from the non-canonical "Draft" to "Legacy".
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* test: capture stderr via spawnSync; record ADR-0010 draft supersession
Two fixes surfaced by the first gsd-test run and by regenerating the index:
- tests/adr-index-gate.test.cjs used execFileSync, which only surfaces stderr
through the thrown error on non-zero exit. The `--write` path exits 0 while
reporting outstanding violations on stderr, so the helper always saw ''.
spawnSync captures both streams on both outcomes.
- The hand-maintained index recorded 0010-skill-surface-budget-module.md as
"earlier draft superseded by ADR-0011" while the file itself still said
Proposed. Deriving the index from the files would have dropped that
assertion and resurrected a superseded draft as a live decision, so it is
recorded at its source, with the reciprocal Supersedes on ADR-0011.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix: drop the dead sdk/ model-catalog candidate retired by ADR-0174
src/model-catalog.cts resolved model-catalog.json through three candidates, the
second being sdk/shared/model-catalog.json three levels up. That was the legacy
source-repo fallback kept by the #3288 fix ("check the co-located path FIRST,
before the legacy source-repo path").
ADR-0174 then retired the @opengsd/gsd-sdk package boundary and deleted the sdk/
tree (
|
||
|
Tom Boucher
|
cf004df678 |
refactor(#2360): host dispatch table + state cutover pilot (ADR-2346 P1) (#2364)
* refactor(#2360): host dispatch table + state cutover pilot (ADR-2346 P1) Pilot cutover for ADR-2346 Phase 1 (epic #2345). Introduces the Layer-2 host dispatch table — dispatchHostCommand + HOST_COMMAND_ROUTERS, consulted in runCommand's default case after capability/overlay dispatch, before the unknown-command error. Migrates 'state' as the pilot: removes the hardcoded case 'state': arm; state now dispatches default -> dispatchHostCommand -> routeStateCommand, byte-identical to the old path (proven by the new state-command-cutover equivalence test, 5-category template). Host commands are NOT capabilities (core, non-toggleable, no tier/activationKey) — the capability registry stays reserved for toggleable feature bundles per ADR-959. This is the host-vs-capability distinction the merged ADR-2346 lacked; the ADR is corrected here alongside the code that realizes it. - gsd-core/bin/gsd-tools.cjs: HOST_COMMAND_ROUTERS + dispatchHostCommand (prototype-pollution-safe); wired into default case; case 'state': removed; dispatchHostCommand + HOST_COMMAND_ROUTERS exported for tests. - tests/state-command-cutover.test.cjs: UNIT/DISPATCH/BEHAVIOR/REGISTRY equivalence (recording-mock + runGsdTools end-to-end + pollution guard). - docs/adr/2346-*.md: refine Decision 1/2 to the host-table vs capability- registry model (correction that did not land in the merged #2355). Behavior-preserving. Subsequent P1b/c PRs migrate phase/init/roadmap/validate/ verify using this proven template. Closes #2360. * test(#2360): regenerate golden fixtures + allowlist for state cutover Bookkeeping for the gsd-tools.cjs change: npm run gen:golden regenerates the install-parity fixtures (gsd-tools.cjs content hash changed), and the new tests/state-command-cutover.test.cjs is added to the lint-test-file-count allowlist under the 'state' prefix. * refactor(#2360): migrate remaining Tier-1 routers (phase/init/roadmap/validate/verify) Completes P1: all 6 Tier-1 host routers now dispatch via HOST_COMMAND_ROUTERS (state landed in the pilot commit). init preserves its #1688 warnIfStaleBake pre-hook; validate binds the output emitter. Cutover test extended to assert all 6 are consumed + owned. Golden install-parity fixtures regenerated. |
||
|
Tom Boucher
|
b2961c3f69 |
fix(#2070): accept adaptive model_profile in validate health; warn on invalid models tiers (W022) (#2336)
* test(#2070): fail-first tests for adaptive model_profile and models tier validation Encodes the three acceptance criteria from #2070 plus the boundary cases the resolver silently ignores today (non-string values, empty string, mistyped phase-type key), and pins VALID_TIERS to a catalog-derived set. Red phase: these fail against current src/ by design. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SLufH5sDuqA1AiEGu45cuA * fix(#2070): accept adaptive model_profile in validate health; warn on invalid models tiers (W022) W004 sourced its profile list from a hand-maintained literal that predated the adaptive profile, so `"model_profile": "adaptive"` was false-flagged. It now reads VALID_PROFILES, which model-catalog.cts derives from model-catalog.json. models.<phase_type> was validated nowhere: the resolver's tier gate silently drops unknown values, so a typo like `"planning": "opuss"` was an undiagnosable no-op. A new W022 flags unknown phase-type keys and invalid tier values (including non-string values, which the same gate also drops). VALID_TIERS moves from a function-local literal in model-resolver.cts to a catalog-derived export, so health and the resolver cannot disagree by construction rather than by parity test. Object.values(adaptiveTierMap) is ['opus','sonnet','haiku'] plus 'inherit' — identical to the previous literal, so resolution behavior is unchanged. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SLufH5sDuqA1AiEGu45cuA * docs(#2070): changeset for validate health adaptive profile + W022 Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SLufH5sDuqA1AiEGu45cuA * fix(#2070): close review findings — malformed models, tier-list duplication, changeset gate Review of the initial fix surfaced three real defects, folded in per the no-defer rule: 1. verify.cts: the W022 guard skipped a top-level `models` that is present but not a plain object (`[]`, `"opus"`, `5`, `true`). The resolver ignores those identically, so they were the same undiagnosable no-op #2070 targets — just one level up. They now warn; absent/null/{} stay silent. 2. config-loader.cts: RUNTIME_OVERRIDE_TIERS was a second hardcoded copy of the tier vocabulary this change had just de-hardcoded elsewhere. It now derives from the catalog via ADAPTIVE_TIER_VALUES (no 'inherit' — runtime overrides resolve to a concrete tier). Byte-equivalent to the old literal. 3. scripts/changeset/lint.cjs: USER_FACING_PREFIXES omitted `src/`. Post-ADR-457 the product source is src/*.cts compiled to a gitignored gsd-core/bin/lib, so the `gsd-core/` prefix is dead coverage for library code and a src/-only PR could merge with no release note — including this one. Adding `src/` closes the gate; tests/ stays non-user-facing. Also corrects a false docstring in the VALID_TIERS test: value-equality cannot detect a re-hardcoded literal, so the test no longer claims it does. Two review findings were rejected with evidence rather than actioned: - W021 double-allocation is governed by ADR-612 ("W021 renumber -> void ... kept, message-disambiguated"), not a defect. - Global-defaults validation would be a false-positive generator: config-loader reads ~/.gsd/defaults.json only on the "no .planning/" branch, and health early-returns E001 without .planning/, so those values provably never affect resolution in any context health can run. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SLufH5sDuqA1AiEGu45cuA * test(#2070): regenerate install goldens for the changeset-lint change scripts/ ships as an installed artifact, so scripts/changeset/lint.cjs's content hash is pinned in all 18 runtime golden fixtures. Adding 'src/' to USER_FACING_PREFIXES changed that hash and tripped every golden parity check. Regenerated via `npm run gen:golden`; the only delta is the lint.cjs hash. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SLufH5sDuqA1AiEGu45cuA * docs(#2070): backfill PR number 2336 into changeset Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01SLufH5sDuqA1AiEGu45cuA --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Tom Boucher
|
89b1bef881 |
refactor(#2267): golden-parity file-set snapshot + anti-staleness CI selection (#2274)
Phase 2 of golden-parity redesign (epic #2264). Adds an install file-set snapshot (golden-install-tree) and a ci-test-scope rule selecting golden-parity whenever any installed-source path changes, closing the silent-staleness hole behind the #2266 red. ADR-2264 amended (the copy/transform split premise was unsound). Closes #2267. |
||
|
Tom Boucher
|
6a474db3aa |
refactor(#2266): single-source golden-parity manifest builder + fixture correction (#2273)
Phase 1 of golden-install-parity redesign (epic #2264). Consolidates buildParityManifest + exclusion constants into tests/helpers/install-shared.cjs (fixes realRoot divergence), adds anti-divergence guard, corrects 12 stale golden fixtures to portable values. Closes #2266. |
||
|
Tom Boucher
|
c1885df9e5 |
chore(#2143): prohibition-with-teeth + migrate remaining ad-hoc table sites — Phase 4 (final) (#2253)
* chore(#2143): prohibition-with-teeth + migrate remaining table sites — Phase 4 Phase 4 of epic #2143 (ADR-2143 §7). Completes the markdown table/mutation consolidation by (a) giving the ad-hoc-parsing prohibition teeth and (b) migrating the last ad-hoc table sites onto the shared seam. - src/markdown-table.cts: new formatting-preserving `updateTableCell` primitive (self-contained, ragged-row-tolerant header/delimiter/cell-range scan; splices only the target cell's raw span, preserving all other bytes incl. padding/CRLF; no-op-preserves-padding when a transformer returns the current value). Exports splitTableRow/isDelimiterRow/findTableStartOffset for tolerant reuse. - eslint-rules/no-adhoc-markdown-parsing.cjs: TABLE-REGEX detector extended to `new RegExp(<literal|static-template>)`; new `.replace()`-mutation detector for roadmap/state/content receivers with a table/section-shaped pattern. - scripts/lint-table-schema-drift.cjs (wired into lint:ci): fails if a TABLE_SCHEMA header drifts from its authored table; tests import its logic (single source). - Migrated onto the seam (behaviour-preserving vs pre-Phase-4 HEAD, verified byte-diff old-vs-new): roadmap.cts cmdRoadmapUpdatePlanProgress, phase.cts cmdPhaseComplete + traceability, milestone.cts cmdRequirementsMarkComplete, uat.cts read path, state.cts metrics/decisions/By-Phase. - Incidental correctness gains from the migration: a decoy table can no longer swallow a phase-progress update (## Progress scoping); a ragged neighbouring row no longer silently aborts an edit; completing integer phase N no longer touches a decimal sub-phase N.x row; record-metric no longer drops trailing section content or duplicates the ## Performance Metrics section. - Kept justified allow-adhoc-markdown markers only where genuinely not a table (security.cts <|role|> token) or a loose non-GFM section (uat human-verify). Two orthogonal isolated reviews (correctness/adversarial + security) passed; correctness found 4 behaviour regressions in the first migration pass, all fixed and re-verified byte-identical-or-better vs OLD. Surfaced for maintainer (pre-existing, ambiguous domain logic, NOT changed here): templates/state.md places a By-Phase table under ## Performance Metrics while cmdStateRecordMetric assumes a Plan|Duration|Tasks|Files table. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2143): match traceability row by first-cell value, not Requirement header Phase 4's migration matched the REQUIREMENTS.md traceability row by a column literally named `Requirement` (`row['Requirement']`), but real tables head that column `REQ-ID`. The by-name lookup found nothing, so `phase complete` and `requirements mark-complete` left the Status cell `Pending` (regressed #2769 / #2203, caught by gsd-test — 8 failures, both node 22/24). - src/phase.cts, src/milestone.cts: match the row by its FIRST cell's value (the requirement-ID column) regardless of that column's HEADER name, via `Object.values(row)[0]` (updateTableCell builds the record in header order). This mirrors OLD's first-cell `\|\s*<id>\s*\|` anchor, restoring header-name independence while keeping the seam. - src/milestone.cts hasTable: broadened from `Requirement`-only to also recognize `Requirement ID` / `REQ-ID` / `REQ ID` headers, kept in sync with the now-positional rowMatch/hasRow so a REQ-ID-headed table participates in the ADR-2143 §6 write-set and the #2140 table_unmatched drift check (it was silently omitted before — a checkbox-only partial reconcile against a REQ-ID table could report as fully reconciled). The `Requirement`-headed path is byte-identical to OLD. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * test(#2143): replace stale structural milestone guards with behavioural suite The `milestone.cjs regex global state fix` block was a source-structure guard (allow-test-rule: structural-regression-guard) — it readFileSync'd the compiled milestone.cjs and asserted removed regex idioms (`tablePattern.test`, `afterTable !== reqContent`, `doneTable = new RegExp(...)`). Phase 4's migration deleted those regexes (table update is now updateTableCell), making the assertions obsolete. Per the Test Cleanup rule, replace them in-PR with a behavioural suite driving the compiled CLI: - multi-ID mark-complete flips all IDs (guards the lastIndex/global-state class), - Pending->Complete flip under both `REQ-ID` and `Requirement` headers (#2769), - idempotent already_complete detection with no corruption, - REQ-ID-headed table participates in write_set (traceability entry, applied), - REQ-ID-headed table trips #2140 table_unmatched drift on a missing row. Pruned the now-nonexistent structural-regression-guard entry from the lint-allow-test-rule-refs allowlist (the source-text-is-the-product entry for the same file remains valid). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * chore(changeset): backfill PR number 2253 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2143): record-metric targets its own metrics table, not By-Phase velocity `state record-metric` appended its per-plan row (`| Phase 1 P1 | 5min | 3 tasks | 4 files |`) into the FIRST table under `## Performance Metrics` — which on a real template-derived STATE.md is the By-Phase velocity table `| Phase | Plans | Total | Avg/Plan |`, polluting it on EVERY plan completion (execute-plan.md:414 is a per-plan call). The command's own metrics table is `| Plan | Duration | Tasks | Files |`, which the template does not ship, so the row never reached it; the scaffold branch also emitted a wrong `| Phase | Plan | Duration | Notes |` header matching neither the row nor the canonical table. Pre-existing (predates Phase 4); surfaced while migrating this site and fixed here per no-defer, on the user's explicit go-ahead. - src/state.cts cmdStateRecordMetric: locate the metrics table by its own header shape (`Plan|Duration|Tasks|Files`, via splitTableRow/isDelimiterRow) rather than "first table in the section". When the section exists but has no metrics table (only the By-Phase table), self-heal by appending a fresh **Per-Plan Metrics:** table to the END of the section body — By-Phase table, Recent Trend and footer preserved verbatim, no duplicate `## Performance Metrics` heading, created stays false. Absent-section scaffold header corrected to the canonical `| Plan | Duration | Tasks | Files |`. Ragged-tolerance + None-yet preserved. - Not touching templates/state.md (golden-install-parity hashed) — record-metric self-creates the table on first use instead. Failing-first regression test (tests/state.test.cjs) demonstrates the By-Phase pollution on the pre-fix build, then green after. Verified: no pollution, self- heal idempotency, both-tables isolation, content/heading preservation, flags, None-yet, corrected scaffold header (23-check adversarial harness + all existing record-metric scenarios). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * feat(#2143): deleteSection seam primitive (level-bounded whole-section removal) ADR-2143 §4 shipped withSection/collectSection (replace a section BODY) but no way to DELETE a section (heading + body). Phase 4 suppressed the phase-remove section delete instead of building it. deleteSection(content, predicate, opts) locates the section via the collectSection machinery and splices out from the heading's start offset to the next same-or-higher-level heading — so a level-3 `### Phase N` delete stops at a following level-2 `## Progress`, never past it. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2143): phase remove no longer deletes ## Progress on last-phase removal updateRoadmapAfterPhaseRemoval deleted a `### Phase N` detail section with a greedy raw regex whose lazy scan, on the LAST phase, ran to EOF and destroyed the following `## Progress` heading and its entire tracking table — silent data loss, uncovered by tests (removal tests only exercised a middle phase). Migrated onto the new deleteSection seam (level-bounded, stops at `## Progress`); dropped the allow-adhoc-markdown SECTION-DELETION suppression. Failing-first regression (tests/phase.test.cjs) removes the LAST phase and asserts the ## Progress heading + table survive; middle-phase removal is byte-identical. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * feat(#2143): deleteTableRow seam primitive (row removal, ragged-tolerant) Sibling of updateTableCell: locates the first GFM table, matches a DATA row by predicate (ragged-tolerant record build, header order), and splices out that row's whole line preserving every other byte. Returns {ok:false,reason} on no table / no match. Enables migrating the phase-remove Progress-table row delete off its ad-hoc regex (ADR-2143 §7 — the "future row-delete seam" Phase 4 punted). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2143): phase remove deletes the Progress row via deleteTableRow The Progress-table row delete used a whole-document regex with two defects: (a) `\.?\s` required whitespace after the phase number, so a COMPACT row `|2|Beta|` was never deleted (stale row left behind); (b) unscoped — it could strike a row in a different table (e.g. an earlier `| Phase | Requirements |` table). Migrated onto deleteTableRow, scoped to the `## Progress` section (mirrors deriveProgressFromRoadmap), matching the row by first-cell phase number (integer zero-pad-insensitive; decimal exact; removing `2` never touches `2.5`). Both allow-adhoc-markdown suppressions removed. New behavioural tests: compact unpadded row deleted; padded byte-parity on the surviving rows (their ordinal correctly renumbers via the pre-existing renumber block). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2143): deleteTableRow leaves no dangling newline on last EOL-less row Deleting the final row of a table with no trailing EOL sliced from the row's start to end-of-string, stranding the newline that terminated the previous line. Back rowStart over the preceding \r?\n in that branch so the table ends cleanly. (Caught by the primitive's own unit test on gsd-test; local scenario checks missed the no-trailing-EOL edge.) Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2143): migrate read-only section-collects onto collectSection Six hand-rolled `## Section` read-extract regexes replaced by the collectSection seam (behaviour-preserving; extracted bodies feed the same downstream parsers): state.cts matchSessionSection (## Session / ## Session Continuity) + ## Blockers, smart-entry.cts ## Blockers, audit.cts ## Current Focus + ## Open Questions. Removes 6 allow-adhoc-markdown "pending #1372" suppressions. Incidental fix: the old Session regex `## Session[ \t]*\n` silently failed on a CRLF `## Session\r\n` heading (Windows STATE.md), nulling all session fields; collectSection is CRLF-safe, so session state now resolves on Windows. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2143): fence-safe state-transition section writes + dedup stripFrontmatter - milestoneCompleteCore's `## Current Position` and `## Operator Next Steps` section resets used fence-blind raw regexes that a fenced `##` inside the body could truncate/mis-target (#2130/#2067/#2080 class). Migrated onto a fence-aware tokenizeHeadings-based helper (resetSectionVerbatim) that is byte-identical to the old output on the canonical path (9/9 fixtures) and correctly ignores a fenced fake heading (proven robustness gain). - mutateCurrentPositionFirstTime: hand-rolled locate+splice → collectSection + replaceSection (byte-parity). - stripFrontmatter was inlined byte-identically in state.cts AND state-transition.cts; hoisted the single canonical copy into frontmatter.cts (both call sites now import it) + unit tests — eliminates the divergence risk per CLAUDE.md "Generative Fix Divergence". Removes 3 allow-adhoc-markdown / #1372 markers. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2143): name-address By-Phase sum + uat parse, eslint recall hole, catches - state.cts By-Phase "Total plans completed" sum: positional 2nd-cell regex → name-addressed splitTableRow read (correct on a reordered header, where the old code silently summed the wrong column). Marker removed. - uat.cts parseVerificationItems: loose pipe regex → splitTableRow within the existing table/numbered/bullet union scan (item list byte-identical; does NOT reintroduce the reverted strict-parseMarkdownTable item-drop). Marker removed. - eslint no-adhoc-markdown-parsing: close the `new RegExp(identifier)` recall hole — resolve a const-declared table-shaped regex identifier (mirrors the .replace() detector) + RuleTester cases; param/call args stay out (boundary). - commands.cts: delete a lying comment that claimed the scaffold date "stays on raw UTC / deferred" — #2136 already moved it to realClock.localToday(). - Empty catches (classified, not blind-swept): removed 4 dead try/catch; fixed 3 error-hiding (phase-insert decimal-dir I/O collision now fails loud; phase-remove rename partial-failure surfaced; milestone-archive true count via finally); left best-effort swallows with justification comments. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2143): extractFencedBlock seam + migrate api-coverage named fence parseCoverageMatrix extracted its ```coverage fenced block with an ad-hoc regex (the last real allow-adhoc-markdown suppression). Added extractFencedBlock to the markdown-sectionizer seam (reuses stripFencedCode's CommonMark fence engine — info-string match, ~~~/backtick, nesting, indent) and migrated onto it; byte- parity on the parsed CoverageMatrix across 8 fixtures. Only security.cts:367 (a genuine `<|role|>` protocol-token false-positive, not a GFM table) remains marked in src/ — the "prohibition with teeth" goal (nothing grandfathered but a true FP) is met. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2143): By-Phase row insert is name-addressed (insertTableRow seam) updatePerformanceMetricsSection's INSERT-new-row branch located the By-Phase table with a canonical-column-order-only regex + a hardcoded positional row literal, so on a reordered header it silently inserted nothing — inconsistent with the now name-addressed UPDATE and SUM halves of the same function. Added insertTableRow (markdown-table seam sibling of updateTableCell/deleteTableRow: name-addressed, header-order-agnostic, EOL-preserving) and migrated the branch onto it, mapping By-Phase values by column NAME. Canonical-order output is byte-identical; a reordered header now inserts a correctly-mapped row; a pre-existing CRLF mixed-EOL splice glitch is incidentally fixed. Retired the now-dead byPhaseTablePattern const. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2143): phase-list checkbox flip via updateBullet seam Added updateBullet (markdown-sectionizer): a fence-aware, offset-tracked single-bullet write primitive (GFM 1–4-space marker tolerance) — the write counterpart to read-only iterateBullets. Migrated mutateMilestonePhase's phase-list checkbox flip (`- [ ] Phase N …` → `- [x] … (completed <date>)`) off its whole-slice regex onto it, same milestone-slice scope + clock seam. Byte-identical across simple / idempotent / metachar-title / double-space / CRLF scenarios. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2143): scope the Progress-ordinal renumber to ## Progress via seam phase remove's integer-renumber decremented Progress-table phase ordinals with a whole-document `content.replace(/(\|\s*)(\d+)(\.\s)/g, …)` — unscoped, so it also rewrote any `| N. …` cell in an unrelated/decoy table (same class as the batch-2 row-delete scoping bug). Migrated onto updateTableCell, scoped to the ## Progress section, decrementing each affected row's leading phase ordinal by column name. Byte-identical on canonical Progress tables + multi-row + decimal-sibling cases; a decoy `| 3. … |` row before ## Progress is now correctly left untouched. The sibling heading / checkbox-bullet / PLAN.md-filename / Depends-on-prose renumbers are not GFM-table mutations (outside ADR-2143's table/section mandate) — left as-is. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2143): review fixes — scope traceability write, restore Current Position H3-stop Adversarial review of the remediation (BLOCK verdict) — all 9 findings fixed: - F1 (BLOCKER): requirements mark-complete / phase complete flipped the checkbox but NOT the traceability row on the shipped template, because updateTableCell bound to the FIRST table (## Out of Scope, no Status column) instead of the ## Traceability table — the #2140 silent-divergence class, re-introduced by the seam migration and missed by tests (fixtures had Traceability first). Scoped the write + hasRow probe to the ## Traceability section slice (updateTraceability Cell helper) in milestone.cts + phase.cts. Failing-first tests on the Out-of-Scope-before-Traceability layout; the #2769 first-cell match preserved. - F2 (MAJOR): mutateCurrentPositionFirstTime restored to locateCurrentPosition (STOP_H2_PLUS) — collectSection's default H2-stop swallowed a level-3 subsection and the field regexes clobbered it (#2130 class). - F3/F8: Progress-ordinal renumber re-escapes via escapeCell + keys padding recovery by row index (was de-escaping `\|` and losing padding on dup values). - F4: insertTableRow escapes cell values internally. - F5: updateBullet accepts a tab after the marker (`[ \t]{1,4}`). - F7: resetSectionVerbatim consumes CRLF blank lines (byte-parity on CRLF). - F6/F9: corrected two misleading comments. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * chore(changeset): data-loss + CRLF-session user-facing fixes (#2253) Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * test(#2143): de-flake the G10 windsurf ReDoS-guard wall-clock assertion The G10 test asserted `elapsedMs < 1000` for a 200k-char payload — a wall-clock assertion (CLAUDE.md: never assert on wall-clock time) that flaked on a loaded node24 bench at ~1.1s. It was redundant: runHook's spawnSync `timeout: 10000` already SIGKILLs a catastrophic-backtracking hook, so the exit-0 assertion is the real ReDoS guard. Removed the timing assertion; kept exit-0 + documented the subprocess-timeout mechanism. Surfaced (not caused) by this branch's gsd-test runs loading the bench; unrelated to the markdown-parsing changes but fixed in place per the no-flaky-tests rule. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
d49ac81306 |
chore(#2143): markdown table model + schema registry + fail-loud pilot — Phase 1 (#2248)
* chore(#2143): markdown table model + schema registry + fail-loud pilot — Phase 1 Phase 1 of epic #2143 (ADR-2143): consolidate markdown table parsing onto a canonical seam and migrate the pilot reader. - Add src/markdown-table.cts: parseMarkdownTable (GFM tables -> typed {columns, rows} addressed by column NAME; ragged rows are typed parse errors, not silent), a single-source TABLE_SCHEMAS registry (RoadmapProgress / RequirementsTraceability / QuickTasks / Security, with variants under one id), matchTableSchema, and findTableBySchema. Result<T> is scoped to this seam (distinct from the dispatch Result). - Migrate deriveProgressFromRoadmap (src/phase-lifecycle.cts) off the position-anchored regex to name-based resolution via the seam — fixes #2137 (the 5-column milestone-grouped Progress table previously returned all-null). - Add a schema-backed `gsd-tools quick-tasks-append` subcommand and route fast.md's log_to_state through it, retiring the inline `awk NF-2` column arithmetic — fixes #2133 (addresses #2012, #2119). Cell values are escaped (| and newlines) and the STATE.md read-modify-write is atomic under readModifyWriteStateMd (lost-update race, cf. #500/#905/#1230). - Writer/reader/template parity test guards TABLE_SCHEMAS against drift (ADR-2143 §3 Generative-Fix-Divergence). Registration: .gitignore, eslint.config.mjs, docs/INVENTORY.md + INVENTORY-MANIFEST.json, CONTEXT.md glossary, docs/CLI-TOOLS.md. Behaviour-preserving for the canonical 4-column Progress table; the named bugs are driven fail-first. Extend-never-mutate (ADR-2143 §2). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * chore(#2242): backfill changeset PR number (#2248) Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2242): escape backslash before pipe in markdown-table cell escaping CodeQL js/incomplete-sanitization (high): escapeCell escaped | -> \| but not the backslash itself. Now escapes \ -> \\ before | -> \|, and splitTableRow unescapes both \\ -> \ and \| -> | symmetrically so cell values (incl. literal backslashes) round-trip exactly. Added backslash round-trip tests. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * fix(#2242): read ROADMAP Progress table by column name — supersede #2168 ad-hoc scan Rebase reconciliation with #2168 (the tactical #2137 fix that marked itself "pending #2143"). deriveProgressFromRoadmap now resolves the Progress table via a new seam helper findTableWithColumns (first table whose header is a superset of Phase/Plans Complete/Status/Completed, any order, extra columns ignored) and reads cells by NAME — order/injection-invariant per ADR-2143 §3 — instead of the exact TABLE_SCHEMAS match. This satisfies #2168's column-invariance property test while staying seam-based and preserving its `## Progress` scoping (#2012/#1445). Ragged Progress tables now resolve to null (ADR-2143 fail-loud); updated the stale state.test.cjs assertion that predated the Phase-1 migration. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
4bb846b67a |
fix(#2112): scope commit to --files pathspec, not entire index (#2148)
* fix(2112): scope commit to --files pathspec, not entire index cmdCommit/cmdCommitToSubrepo/cmdPrSubrepo staged exactly the files named in --files but then ran a bare 'git commit' with no pathspec, absorbing anything else in the index into a commit whose message described only the named files (#2112). Fix: append '-- ...stagedPaths' to the commit args when the caller declared a scope. Three guards are load-bearing: - stagedPaths (not filesToStage) excludes skipped missing files (#2014) - explicitFiles gate keeps the default .planning/ path byte-identical - MERGE_HEAD check via 'git rev-parse' falls back to bare commit during merge - --amend is left without pathspec (different operation) cmdPrSubrepo pathspec uses changedFiles (old+new for renames) so the full rename is captured atomically. Also fixes workflow markdown in spec-phase.md and add-tests.md. All-files-missing now short-circuits to nothing_to_commit instead of absorbing the entire index under a message describing files that were not committed. * docs(changeset): backfill PR number (#2148) * test: update golden-install-parity fixtures for workflow markdown changes (#2112) * test: update golden fixtures + workflow baselines for #2112 changes - claude-local.json golden fixture (now generated via gen script) - workflow-size-baseline.json (add-tests.md +16, spec-phase.md +42 bytes) - Extended gen-golden-install-parity-zcode.cjs to also regenerate the claude local-layout fixture |
||
|
Tom Boucher
|
8022c5c864 |
fix(#2198): remove dead scan exports, correct injection-scan docs
scanEntropyAnomalies + shannonEntropy were dead exports with zero production callers — the live hooks (gsd-prompt-guard.js, gsd-read-injection-scanner.js) inline their own pattern subsets for hook independence and never called these functions. Changes: - Remove scanEntropyAnomalies + shannonEntropy from src/security.cts - Remove scanEntropyAnomalies test block from tests/security.test.cjs - Correct REQ-SCAN-INJ-02/-03 in FEATURES.md (EN/zh-CN/ja-JP) to describe what actually runs live (injection patterns, invisible Unicode) vs CI-only (base64-decode, codebase scan) - Correct docs/security/baseline.md §2.4 to clarify live hooks inline patterns, not import from security.cts - Add regression test asserting the corrected contract - scanForInjection retained: it serves as the CI codebase-scanner engine |
||
|
Tom Boucher
|
0137f9b76f |
Merge pull request #2188 from open-gsd/feat/2182-capability-registry
feat(#2182): add Community Capability Registry discoverability catalog |
||
|
Tom Boucher
|
bd613566cb |
feat(#2100): drive Windsurf through the EoS descriptor + wire Cascade's blocking hook bus (ADR-1239)
Fold all 10 residual isWindsurf branches in bin/install.js onto descriptor-driven hostBehaviors (byte-parity — no fold changes any install output): - 2 dead destructures dropped (uninstall, finishInstall); the dead `else if (isWindsurf)` legacy agent-loop arm removed (windsurf ∈ _DESCRIPTOR_AGENTS_RUNTIMES → unreachable). - skipSharedHooksInstall:true folds the two `!isWindsurf` shared-hooks exclusions. - legacyDevinSkillsCleanup:true folds the `.devin`→`.windsurf` one-time cleanup gate. - installsCommandBodiesForWorkflowDelegation:true folds the #1629 command-body copy (workflow-delegation target — load-bearing; local-install verified intact). - verificationStyle:"windsurf-workflows" folds the workflow-count report. - Corrected stale _LEGACY_SCAN_SUBDIR_NAMES + hooks-json manifest comments (cursor + windsurf). Zero live runtime==='windsurf'/isWindsurf branches remain across bin/install.js, install-engine.cts, surface.cts, runtime-artifact-conversion.cts (AC2 guard scans all four). UPGRADE (Cascade hook bus): wire GSD's write/command safety guards into Windsurf's native hook bus. New hooksSurface 'windsurf-hooks-json' (VALID_HOOKS_SURFACES 7→8, GATE A profile-marker-only allowlist, the HooksSurface union) + writeWindsurfHooksJson (Cursor-templated, Cascade's flat {hooks:{<event>:[{command}]}} shape) writing .windsurf/hooks.json with two BLOCKING pre-hooks: - pre_write_code → gsd-windsurf-pre-write.js: blocks writes to a file outside the active git worktree / into .git internals. - pre_run_command → gsd-windsurf-pre-command.js: conservative destructive-command deny-list (rm -rf of root/home incl. sudo/env/path-prefixed forms; fork bombs; force-push refspec forms — HEAD:main, +main, --force/-f — to main/master/next). Both use Cascade's protocol (stdin JSON, exit 2 + stderr to block, exit 0 to allow, fail-open on error/timeout). Tokenize-based classifier (no catastrophic-backtracking regex; 4096-char cap) with the fail-closed false-positives fixed post-review. The 4 advisory GSD guards + pre_mcp_tool_use + 5 post_* logging events are deliberately NOT wired: Cascade has no context-injection channel for advisory hooks and GSD has no MCP guard — porting them would be non-functional padding (documented; codebuddy #2098 / copilot #2099 faithful-subset precedent). extendedHookEvents stays []. Golden: the 2 guard scripts ship in the shared hook bundle (HOOKS_TO_COPY + the shared managed-hooks-registry), exactly like cursor's 6 gsd-cursor-*.js scripts — so the 8 shared-bundle runtimes' fixtures gain the 2 inert windsurf scripts + the registry hash (functionally inert for non-windsurf; the established cursor pattern). No install-output change beyond that (the folds are byte-parity; skip-bundle runtimes untouched). New scripts registered in managed-hooks-registry + build-hooks + INVENTORY. Tests: declarative-reference- windsurf (adapter/axes/fail-closed + AC2 guard) + windsurf-hooks-bridge (live exit-2 blocking + allow/fail-open + ReDoS-bound + writer/reconcile/remove idempotency); VALID_HOOKS_SURFACES pin updated to 8. Matrix hookBus delta + changeset (Changed). capability-registry regenerated. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
79670a0285 |
fix(#2182): harden registry rendering + validation against injection (review)
Addresses findings from the orthogonal /code-review + /security-review passes: - Markdown-injection (CRITICAL/HIGH): escape untrusted free-text (name, description, license, author, eos axes) with mdInline() and size install/uninstall code fences dynamically so a crafted entry cannot inject phishing links, break the summary table, or escape the code fence in the committed, GitHub-rendered catalog. - validateEntries no longer throws on a null/non-object array element (kept the --json contract); rejects control characters in free-text fields; caps field lengths and entry count; tightens the discussion and license regexes so neither admits Markdown metacharacters / newlines. - gen-registry treats a missing capabilities.json as an error (only eos.json is optional pre-PR2); disambiguated from gen-capability-registry.cjs. - Renders the required 'author' field (was captured but never shown). - Adds tests for every fix: escaping/link-hijack/fence, null guard, control chars, length + entry caps, tightened regexes, eos render path, interactions guards. Refs #2182 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
bcf1376727 |
feat(#2182): implement community capability registry validation + generation
Implements the three pure functions in registry-schema.cjs (isValidGsdRange, validateEntries, renderMarkdown) that were stubbed in the previous commit, turning the red suite green: strict per-type schema validation (capability + eos), a self-contained engines.gsd range validator (no semver dep), and deterministic Markdown generation with shields.io release badges + per-entry Discussion links. Regenerates docs/registries/capability-registry.md and adds the Added changeset. Also hardens the isValidGsdRange fast-check property (letters-only major) so it cannot intermittently generate a valid prerelease range and flake. Closes #2182 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
60e3c4988a |
feat(#2182): scaffold community capability + EoS registry (tests + stubbed core)
Adds the discoverability-registry surface for issue #2182: JSON-sourced capability/eos catalogs, a pure schema/vocab module (registry-schema.cjs) with the ADR-857 loop points + ADR-1239 axes, thin validate/gen CLIs, the registry-entry PR template, README spec, and CONTEXT.md glossary terms. The three pure functions (isValidGsdRange/validateEntries/renderMarkdown) are stubbed here so the comprehensive test suite fails first (red), per the feature-implementation red-first directive; the next commit implements them. Refs #2182 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
ab04916682 |
feat(#2095): migrate Kimi CLI onto EoS imperative adapter + native hook-bus + background dispatch (ADR-1239)
Fold all runtime==='kimi'/isKimi logic branches into descriptor-driven hostBehaviors (localInstallDeferred, verificationStyle, agentManifestStyle, reapplyCommand, doneBannerStyle) + add 'kimi' to _DESCRIPTOR_AGENTS_RUNTIMES. Kimi's skills/kimi-agents dispatch was already descriptor-driven (converter-by- name + kimi-agents kind). Zero isKimi/runtime==='kimi' branches remain. UPGRADE 1 (native hook bus): new hooksSurface 'kimi-hooks-toml' + a marker- delimited config.toml [[hooks]] emitter (buildKimiHooksTomlBlock/writeKimiHooksToml in runtime-hooks-surface.cts; resolveKimiHooksTomlDir in runtime-homes.cts). GSD's lifecycle hooks now wire into Kimi's native ~/.kimi/config.toml (Context7- confirmed path) at SessionStart/PreToolUse/Stop/PreCompact/SubagentStart/ SubagentStop — kimi becomes a hooks/ consumer (the 3 && !isKimi exclusion guards removed). config.toml holds absolute install paths so it's golden-excluded via an exact relative-path (.kimi/config.toml), not a basename (which would blind Codex's config.toml). New hooksSurface value added to the closed enum in capability-validator + runtime-config-adapter-registry. UPGRADE 2 (background dispatch): flip dispatch.backgroundDispatch true (Kimi's Agent tool takes run_in_background; root agent already gets the Agent tool), so negotiation no longer flattens dispatch. subagentToolkit stays 'undocumented' per AC (coder/explore/plan have distinct tool policies). MCP transport explicitly deferred (no installer-driven MCP for any runtime). Golden: only kimi.json changes (hooks/ scripts now installed); all 15 others + claude-local byte-identical (kilo/zcode keep their own exclusions). Tests: kimi-imperative-reference (adapter/axes/fail-closed/hostBehaviors + source-grep guard) + kimi-upgrades (config.toml [[hooks]] SessionStart + marker idempotency + backgroundDispatch negotiation). CONTEXT.md glossary + matrix + how-to updated; changeset (Added). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
a1de52d71b |
fix(#2128): sanctions must be a dedicated // comment line (decoy-proof)
Re-review found the `// phase-id-owner:` suppression treated a `//` embedded in a string literal as a comment — help/doc text quoting the sanction syntax (the exact string the scanner's own main() prints) would silently suppress a real re-derivation. Require the marker to LEAD its own comment line (`^\s*//…`), so a `//` inside a string or trailing a code line never counts. All 5 real sanctions are already dedicated lines (scanRepo stays green); trailing same-line sanctions are no longer honored — put the comment on the line directly above. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
e2eaa5b046 |
fix(#2128): address review — migrate 9 mis-allowlisted sites, harden scanner + guards
Correctness review of the Phase 4 guard found the allowlist over-broad and the scanner/guards evadable. Fixed all findings: - Migrate 9 sites that were wrongly sanctioned: their regex is the PURE canonical token (`\d+[A-Z]?(?:\.\d+)*`, no variant), byte-identical to already-migrated siblings. The old justification argued against swapping to the extractPhaseToken() FUNCTION (behavior-risky) — but the guard only wants the same regex built from the SOURCE string (byte-equal, zero risk). Coverage is now 32 migrated / 5 sanctioned, not the overstated 23 / 14 (audit.cts x3, uat.cts, init.cts x4, roadmap-upgrade.cts). Each conversion proven byte-equal (.source + .flags). - Harden the drift detector: also catch the `[0-9]`-in-place-of-`\d` variant; document the accepted limits (cross-line split, semantic restructuring — covered by the identity guard + review, not a text scan). - Sanction robustness: a `phase-id-owner:` marker now counts only inside a `//` comment (a bare substring in a string no longer suppresses a real flag), and the preceding-line window skips blank lines (an auto-formatter's blank line no longer reactivates the flag). - roadmap-parser.cts:462 comment: corrected — that regex carries no /i flag, so its [A-Za-z] class does real case work (matches state.cts:1409's rationale). - Identity guard: surface require failures instead of silently skipping, and floor coverage at >75% of consumer modules (inspects 156/157). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
09be501eb7 |
feat(#2128): phase-id anti-divergence guard — canonical token source + drift scanner + guards
Phase 4 of epic #2121 (ADR-2121 Decision 7), closing the recurrence loop that produced #2111 / #2114 / #2104: no module outside src/phase-id.cts may re-implement phase-ID parsing without failing CI. - phase-id.cts: add PHASE_NUMBER_TOKEN_SOURCE — the canonical phase-number-token grammar (\d+[A-Z]?(?:\.\d+)*) for enumeration/scan call sites, the ANY-phase counterpart to phaseMarkdownRegexSource(n)'s known-number lookup. Extend-only (never touches normalizePhaseName; blast radius 79 fns / CRITICAL). - scripts/lint-phase-id-drift.cjs: pure findPhaseIdRegexDrift(text) + scanRepo(root), wired to `npm run check:phase-id-drift`. Flags a literal re-derivation of the canonical token (both /\d/ and new-RegExp `\\d` escaping, plus the [A-Za-z] and [.-] near-variants) anywhere in src/** outside phase-id.cts, unless sanctioned with `// phase-id-owner: <reason>`. Narrow by design: bare \d+, digits-only captures, \w ids, status-message text and pipe-tables are not flagged. - tests/phase-id-drift-guard.test.cjs: fail-first drift cases (AC1) + live scanRepo(ROOT) zero-drift (AC3) + identity guard — phase-id.cjs exports the complete locked surface and no consumer re-exports a divergent copy (AC2). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
24896ddac7 | fix(#2089): register 4 new cursor hook scripts in build + managed-hooks whitelists | ||
|
Tom Boucher
|
8b99f4f3c3 |
fix(#2088): weight install-heavy test files so they spread across chunks
The targeted CI lane runs changed files UNSHARDED; #2088 touched 13 install-heavy test files that all landed in one chunk, blowing the 600s per-chunk backstop on the slow Windows runner (pure slowness, not a leak — per run-tests.cjs's own comment). Weight install*/codex-* files (~10x a unit file) toward the per-chunk budget so they spread across chunks instead of clustering; light-file chunking is unchanged (weight 1). Adds harness regression tests (heavy split vs light control). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
080bacdb4b | Merge branch 'next' into codex/gsd-onboard | ||
|
Tom Boucher
|
97972ca7fd |
fix(#1575): lower MAX_FILES_PER_CHUNK from 90 to 60 to fix macOS Node 22 timeout
Shard 2/3 chunk 2 (~80 files including state.test.cjs, perf-*, worktree-cleanup) exceeded the 600s per-chunk timeout on macOS Node 22. Reducing the cap from 90 to 60 splits this into two ~40-file chunks, each well within the 600s budget. Three chunks at ~5 min each = ~15 min, safely under the 20m job cap. |
||
|
Tom Boucher
|
4ceedafe9f |
chore(#1925): generalize golden-install-parity generator to all runtimes + args
Support regenerating a single runtime (node scripts/gen-golden-install-parity-zcode.cjs zcode) or all runtimes (no args). Needed when a shared payload file changes and every fixture must be recaptured. |
||
|
Tom Boucher
|
7acbdc71b8 |
test(#1925): register zcode across installer surfaces + fluidify count pins
Resolve the zcode test cascade exposed by gsd-test: - model-catalog.json: add zcode runtimeTierDefaults (null tiers, matching the other profile-marker-only runtimes) so KNOWN_RUNTIMES stays parity with allRuntimes. - runtime-name-policy: add zcode to GLOBAL_CONFIG_HOME_FRAGMENTS (~/.zcode) so getGlobalConfigHomeFragment stops falling through to the .claude default. - installer-migration-install: add the zcode fresh-install contract (flat-skills, no settings, no package.json — same shape as trae). - golden-install-parity: capture the zcode fixture via a standalone generator script (not node --test — the gate stays gsd-test). - capability-matrix.md: regenerate so zcode appears as a first-party row. Fluidify the remaining count-pinned guards so adding a runtime no longer trips a hand-pinned snapshot: gemini-runtime-removed (flag count derives from the registry), non-claude-runtimes-registry-derivation (golden list derived from the registry). |
||
|
Tom Boucher
|
68a5258d45 |
fix(#2017): grant mcp__plugin_context7_context7__* for plugin-marketplace context7 (8 agents) (#2029)
* fix(#2017: grant mcp__plugin_context7_context7__* for plugin-marketplace context7 The 8 context7-using agents granted only mcp__context7__* (standalone server form). Claude Code's plugin-marketplace context7 install names tools mcp__plugin_context7_context7__*, so the grant never matched and every researcher/planner/executor silently lost doc lookup (fell back to WebSearch). - 8 agents: add mcp__plugin_context7_context7__* alongside mcp__context7__*. - scripts/research-profiles.cjs: update the researcher profile tools to match. - tests/context7-plugin-grant-parity.test.cjs: regression guard — no agent grants the standalone form without the plugin form. Closes #2017 * docs(#2017): backfill changeset pr 2029 |
||
|
Codesmith
|
425d2f2c8b |
fix(#1990): keep onboard resolver delegation in sync with canonical launcher
onboard.md delegates the gsd_run preamble to
gsd-core/references/gsd-run-resolver.md via @-include, but two guards
regressed once the canonical launcher snippet advanced to
${CLAUDE_CONFIG_DIR:-$HOME/.claude} (#2024):
- runtime-launcher-parity (B2): the resolver reference still shipped the
old $HOME/.claude arm. references/ is not covered by
sync-runtime-launcher.cjs, so refresh the resolver bash block to be
byte-equal to _runtime-launcher.snippet.sh.
- /gsd:onboard command contract: sync-runtime-launcher.cjs had re-inlined
the preamble into onboard.md (a delegating file). Teach the sync
transform to strip-but-never-inline files that @-include the resolver,
mirroring the exemption already in the parity test (B/B2).
Regenerate golden install fixtures and the workflow size baseline for the
smaller onboard.md.
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
|
||
|
Tom Boucher
|
bd77b40107 |
feat(#1825): configurable graphify graph location (graphify.graph_path) (#2013)
* feat(#1825): configurable graphify graph location (graphify.graph_path) Add a graphify.graph_path config key (.planning/config.json) that overrides where /gsd-graphify query|status|diff read the knowledge graph, so one curated umbrella-level cross-repo graph can serve multiple sibling projects without N drifting ~5 MB mirror copies. Previously the graph location was hardcoded to <cwd>/.planning/graphs/. - src/graphify.cts: resolveGraphLocation(cwd, planningDir) honors the key (resolved relative to project root; absolute paths honored via path.resolve); falls back to the historical .planning/graphs/graph.json when unset/blank/ non-string (byte-identical). Wired into graphifyQuery, graphifyStatus, graphifyDiff (snapshot travels with the configured graph via dirname), and writeSnapshot. Configured-but-missing -> actionable error naming the path. Build stays project-scoped (skill hardcodes the cp dest); umbrella graph is built in the umbrella project, sub-projects only READ it. - config-schema.manifest.json: register graphify.graph_path in validKeys. - tests/graphify-graph-path.test.cjs: boundary matrix (unset byte-identical, set+present reads configured graph not default, set+missing actionable error, relative resolved vs project root, blank treated as unset, snapshot alongside configured graph, diff from configured dir, build project-scoped) + VALID_CONFIG_KEYS registration. - docs: CONFIGURATION.md row, FEATURES.md REQ-GRAPH-06, CONTEXT.md module note, .changeset (Added). Closes #1825 * docs(#1825): backfill changeset pr number 2013 |
||
|
Tom Boucher
|
97730e59a1 |
fix(#1164): wire external-job config keys + document wave:post choice (#2006)
Refinements A-D to the external-job capability (PR #1998 follow-up): A. Document why the contribution registers at execute:wave:post: #1164 asks for wave:pre, but execute-phase.md only dispatches wave:post today (wave:pre is declared in the loop host contract but not rendered). Wiring wave:pre is a core-loop change #1164 puts out of scope; the executor honors the runtime_budget classification guidance before running any tagged task. B. external_job.artifact_dir is now consumed (was declared but unused): the adapter resolves it via the canonical capability-config seam and surfaces the resolved root in submit output. C. external_job.submit_timeout_ms / poll_timeout_ms are now read from config (were shadowed by env-only reads). Precedence: env > config > registry default; non-numeric config values fall back (no guessing, no NaN). D. CLI surface gains unit coverage: parseFlags, findPlanningDir, resolveExternalJobSettings, formatShowReport. Regenerates capability-registry.cjs from the updated capability.json. |
||
|
Tom Boucher
|
8f2ebbe9bf |
feat(#1928): remove sunset Gemini CLI runtime, redirect to Antigravity (#1996)
* feat(#1928): remove sunset gemini cli runtime, redirect to antigravity Google sunset Gemini CLI on 2026-06-18; Antigravity CLI is its official successor (already a first-class GSD runtime). Remove the gemini runtime from the enum (16->15), aliases, labels, config-home fragment, install path, converters (convertClaudeToGemini{Markdown,Toml,Agent}, convertSlashCommandsToGeminiMentions), capability descriptor, gemini-extension.json, RULESET.GEMINI.*, and the interactive menu (renumbered, no gap). --gemini now prints an explicit deprecation notice citing the 2026-06-18 sunset and redirects to --antigravity (no silent alias, per the issue's Hyrum's-Law rejection). Antigravity is preserved throughout: its GEMINI.md contextFileName, .gemini/antigravity config home, the shared convertGeminiToolName/claudeToGeminiTools tool vocabulary, and the 'gemini' hookEvents dialect it declares. GEMINI.md retargeted as Antigravity's context file. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * chore(#1928): backfill changeset PR number (#1996) Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * chore(#1928): drop Gemini CLI from issue templates (review nit) Removes the sunset Gemini CLI runtime from the two GitHub issue-template runtime lists that the removal PR missed, per @davesienkowski's review nit: - feature_request.yml: 'Applicable runtimes' checkbox (a user could otherwise request a feature for a runtime GSD no longer supports) - bug_report.yml: 'Runtime' dropdown + the stale ~/.gemini/settings.json retrieval-help line Leaves the post-removal templates fully consistent with the Antigravity redirect. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Tom Boucher
|
5ae4ea4c84 |
feat(#1105): add external-job capability (SLURM scheduler-adapter producer half) (#1998)
* feat(#1105): add external-job capability (SLURM scheduler-adapter producer half) The async external-job consumer half (#1165) shipped long ago: the core loop reads .planning/async-jobs/<job>.json manifests and treats a non-terminal one as the legal external_job_waiting half-state. The PRODUCER half (#1164) was the remaining unimplemented piece of #1105. This adds the producer as a default-off capability: - capabilities/external-job/ — capability.json (execute:wave:post -> executor, plan:post -> planner contributions, external_job.* config keys, default-off) + fragments teaching runtime-budget classification and externalization. - src/external-job.cts -> gsd-core/bin/lib/external-job.cjs — pure producer module: SLURM state -> manifest-status map (no guessing), manifest build/validate (versioned stability contract), sbatch/squeue/sacct parsers, and a fail-closed manifest writer (refuses a second non-terminal job for a plan_id already in flight; refuses to clobber a malformed manifest). fs/clock seams for deterministic tests. - scripts/slurm-adapter.cjs — operator CLI (submit/poll/show) wrapping bounded sbatch/squeue/sacct subprocesses; surfaces manifest commands for confirmation and never auto-runs them (trust boundary). - tests/external-job.test.cjs — 23 behavioral + fast-check property tests. - docs/reference/long-running-operations.md + docs/how-to/async-external-jobs.md. - CONTEXT.md glossary entry for the External-job Capability. - Regenerated capability-registry.cjs; pruned the now-stale test-file-count allowlist entry (external-job is at the 2-file cap). * chore(#1105): backfill PR number in changeset * fix(#1105): sync capability artifacts + update registry shape-pin tests gsd-test caught that adding the external-job capability requires its dependent artifacts regenerated and its registry-shape drift absorbed: - sync-manifest-versions: stamp 1.7.0-rc.2 into capability.json (was 1.0.0). - gen-capability-matrix --write: regenerate docs/reference/capability-matrix.md. - gen-inventory-manifest --write: regenerate docs/INVENTORY-MANIFEST.json. - check-gap-analysis-plan-post-e2e: plan:post now has 1 contribution (external-job planner fragment) instead of 0. - execute-wave-post-gate-pipeline-e2e: execute:wave:post now has 2 contributions (mempalace + external-job) instead of 1. * fix(#1105): regenerate capability-registry after version stamp sync-manifest-versions re-stamped external-job/capability.json from 1.0.0 to 1.7.0-rc.2 after the last registry regeneration, leaving the committed capability-registry.cjs stale (CI gen-capability-registry --check failed). gsd-test masked this because its setup runs the full 'npm run build' (which regenerates the registry); CI's 'npm test' pretest only runs build:lib. |
||
|
Tom Boucher
|
b0bd2f7a48 |
chore: move committed-generated-artifact freshness checks to lint:ci (#2000)
gsd-test's build leg runs the full 'npm run build' (which regenerates capability-registry.cjs, loop-host-contract.cjs, package-identity.cjs, etc.), so committed-freshness guards that lived in the unit suite were masked there: gsd-test passed a stale-commit that CI's shard-1/3 test then red-flagged (caught live on PR #1998). The mandated pre-push gate was green on a commit CI correctly flagged. Move the committed-state --check guards into a new 'lint:generated-sync' script wired into lint:ci (the single orchestrated entry point the lint-tests CI job already runs on a build:lib-only tree, so the committed artifacts are checked without regeneration). gsd-test no longer contains these guards, so it can no longer mask them. - package.json: add lint:generated-sync (7 generators --check); wire into lint:ci. - generate-package-identity.cjs: add --check mode (was the only generator without it); no-arg behaviour unchanged (still writes, as build expects). - Remove the committed-freshness guards from the unit suite, keeping all behavioral/structural tests: - capability-registry.test.cjs: drop the --check describe. - loop-host-contract.test.cjs: drop the committed-file staleness test (keep the normalizeLineEndings unit test). - capability-matrix-sync.test.cjs: drop --check + byte-for-byte (keep the architectural content invariants: every cap appears, security ship:pre). - issue-844-manifest-version-sync.test.cjs: drop describe D (--check). - issue-498-package-identity.test.cjs: drop the drift-check test (keep behavioral module-export tests); drop the now-unused render import and its allow-test-rule exemption (allowlist ratcheted 175 -> 174). |
||
|
Jeremy McSpadden
|
e5ef323b15 |
feat(#1787): add /gsd:next smart entry workflow (#1798)
* docs: design spec for /gsd smart-entry command
Hybrid approach porting gsd-pi's smart-entry wizard to gsd-core:
deterministic classifier (gsd-tools smart-entry --json) + markdown
command/workflow with AskUserQuestion + --text fallback. Routing-first
('what now?' menu), 10 situations redesigned for gsd-core's phase loop.
* feat: add /gsd-start smart-entry command
State-aware front door adapted from gsd-pi's smart-entry wizard,
redesigned for gsd-core's markdown-first, multi-runtime architecture.
- src/smart-entry.cts: deterministic situation classifier (no-project,
paused, blocked, verify-failed, needs-first-phase, planning, executing,
verify-pending, idle-stranded, complete, unknown). Reads STATE.md,
ROADMAP.md, git, and verify signals; emits JSON the workflow consumes.
- gsd-tools.cjs: wire case + help listing.
- commands/gsd/start.md + gsd-core/workflows/gsd.md: thin markdown
dispatcher presenting an AskUserQuestion menu (with --text fallback for
non-Claude runtimes) and dispatching to existing commands. Falls back
to /gsd:progress if detection is unavailable.
- help.md: document /gsd:start (parity with bug-2954).
- tests: smart-entry.unit.test.cjs (classifier behavior across all
situations + priority + JSON shape) and gsd-workflow.structure.test.cjs
(markdown-layer invariants + every emitted command resolves to a real
slash command).
Spec: docs/superpowers/specs/2026-06-27-gsd-smart-entry-design.md
Note: command-contract (ADR-0002) requires a gsd:* prefix, so the bare
/gsd from the spec surfaces as /gsd-start.
* refactor: rename smart-entry command to /gsd:next
Rename the command from /gsd:start to /gsd:next per feedback. The
command file is now commands/gsd/next.md (name: gsd:next) and the
backing workflow is gsd-core/workflows/smart-entry.md (named for the
smart-entry classifier and gsd-tools smart-entry subcommand; does not
collide with the existing workflows/next.md, which is the progress
--next sub-workflow). help.md and the spec updated to match.
All affected tests (188) pass; lint:ci clean.
* fix: smart-entry reads real STATE.md schema (nested progress YAML + body Phase field)
Codex review found the classifier misread this repo's own STATE.md: it
looked only for scalar current_phase/total_phases frontmatter and body
fields named 'Current Phase'/'Total Phases', but real STATE.md stores
the phase as body 'Phase: N' and total_phases/percent under a nested
'progress:' YAML object. Both came back null, so active projects
(e.g. this repo at Phase 3 / verifying) wrongly classified as
needs-first-phase.
- detectSignals now reads total_phases + percent from nested progress{}
first, then scalar fm, then body; current_phase falls back to the
body 'Phase:' field (parseProsePhaseField lineage).
- Add regression tests against the real schema (nested progress YAML +
body Phase field) covering verify-pending + executing situations.
Verified against this repo: now classifies verify-pending (was
needs-first-phase). Coverage 93.25% lines / 86.99% branches.
* fix(workflow): tiered fallback when gsd-tools is broken (not just smart-entry)
Live test exposed a self-defeating fallback: when smart-entry --json
failed because gsd-tools itself was broken (missing
markdown-sectionizer.cjs), the workflow fell back to /gsd:progress —
which also depends on gsd-tools and would dead-end too.
Replace the single /gsd:progress fallback with a tiered recovery:
1. Probe gsd_run state-snapshot. If it ALSO errors, the whole tool
layer is down — read .planning/STATE.md directly with the Read tool
and synthesize a minimal situation + actions menu so /gsd:next stays
useful. Surface a rebuild hint.
2. Only if smart-entry alone is missing (older gsd-core), fall back to
/gsd:progress as before.
Matches the direct-read resilience the live agent already did by hand.
* docs: add gsd-next skill surface
* chore: trigger no-mistakes validation
* no-mistakes(review): Fix smart-entry phase ordering
* no-mistakes(review): Fix decimal smart-entry phase ordering
* no-mistakes(test): Fix smart-entry next test contracts
* no-mistakes(document): Docs synced for smart entry
* chore: add changeset fragment for #1798 (/gsd:next smart-entry workflow)
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
* fix: shorten next.md description and update golden install parity fixtures
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
* fix: update /gsd-next refs to /gsd:next in docs and add Smart Entry topic alias
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
* chore: trigger no-mistakes validation
* fix: regenerate INVENTORY-MANIFEST.json for new /gsd-next files
Full CI caught that adding commands/gsd/next.md + gsd-core/workflows/smart-entry.md
left docs/INVENTORY-MANIFEST.json stale (not in the affected-test scope that
no-mistakes' test gate runs, so it surfaced in CI). Regenerated via
node scripts/gen-inventory-manifest.cjs --write; inventory-manifest-sync
test now passes.
* fix: add 'next' to core_loop cluster, update INVENTORY-MANIFEST, fix gates.md ref
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
* fix: regenerate golden install parity fixtures for /gsd:next
Full CI (shard 3/3) caught that adding commands/gsd/next.md + the
smart-entry workflow/lib made the per-runtime golden install parity
fixtures stale across all 16 runtimes. Regenerated via
UPDATE_GOLDEN=1 node --test tests/golden-install-parity.test.cjs.
All 16 fixtures + inventory-manifest-sync now pass.
* Fix smart-entry verify-failed phase scoping and empty resolve shim step
Scope detectVerifyFailed to STATE.md's current phase so leftover higher
phase directories cannot force verify-failed routing. Move the gsd_run
shim resolver into the workflow resolve step so agents define gsd_run
before the detect step runs smart-entry.
* fix: recapture golden fixtures with updated gates.md hash (/gsd:next)
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
* fix: recapture all 16 golden fixtures with updated smart-entry.md hash
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
* chore: regenerate fixtures + inventory manifest after rebase onto next
Rebased onto next which adopted #1837 (package-version normalization to
<VERSION> in golden-install-parity hashes). Recaptured the golden fixture
that needed it (hermes), re-sorted INVENTORY-MANIFEST.json, and regenerated
the gsd-next / ns-workflow skill descriptions to match the command surface.
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
* refactor(#1787): delegate /gsd:next in-project advancement to gated /gsd:progress --next
Reconciles the /gsd:next smart-entry front door with the existing
/gsd:progress --next engine (davesienkowski review on PR #1798). The
classifier previously recommended /gsd:execute-phase directly for the
`executing` situation, bypassing workflows/next.md Route 0
(resume-incomplete-phase invariant, #160) and Gates 1-3 — reproducing the
duplication that got the old flat /gsd-next removed (#3054), plus a
correctness hazard (executing the recorded current phase while an earlier
phase is silently incomplete).
Now planning/executing/verify-pending recommend `/gsd:progress --next`
(single gated engine); the specific command stays an explicit secondary.
Off-path states (no-project, paused, blocked, verify-failed,
idle-stranded, complete) keep direct recommendations — smart-entry's
distinct value over --next. Adds docs/adr/1787-gsd-next-smart-entry.md and
a regression test locking the delegation contract.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* docs(#1787): avoid literal /gsd-next token in ADR (bug-3054 guard)
The repo-invariants #3054 guard bans the removed /gsd-next slash form in
docs surfaces. Refer to the removed command as `gsd-next` (prose) — the
historical reference is unchanged, just the banned token is dropped.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* chore: gitignore compiled host-integration-sdk + handshake-serialized .cjs
Pre-existing gap from #1683: these two src/*.cts modules compile to
gsd-core/bin/lib/*.cjs but were omitted from the per-file ignore list, so
`npm run build`/`npm test` left them as untracked build artifacts (dirty
tree + accidental-commit footgun). Adds them alongside their siblings
(host-integration.cjs, mcp-server.cjs, …). Found while finishing #1798.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* test(#1787): lock per-situation action invariants for all 11 situations + ADR typo
Adversarial-review follow-ups:
- Add a test asserting every situation's action set has exactly one
recommended action, 1-4 unique-id /gsd:* actions (previously the
one-recommended/1-4 invariant was only sampled for 6 of 11 situations).
- Fix ADR typo: /gsd-progress → /gsd:progress.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
* fix(#1798): split oversized test chunks so a slow shard can't trip the per-chunk timeout
Root-cause of the intermittent `full test (windows-latest, 22, shard 1/3)`
failure. It was NOT a leaked handle (the runner's kill message guesses that,
but --test-force-exit already exits leaks cleanly). Diagnosis:
- Ran every shard-1/3 file WITHOUT --test-force-exit + a 45s kill-timer:
zero hangs, zero leaks — every file self-exits. So no leaked handle / hang.
- CI activity profile: output kept flowing (slowly) right up to the 600.0s
kill — a dead hang would go silent. => pure slowness.
- Per-file timing: install-minimal-hooks.test.cjs is a 4987-line / 250-case
consolidation file doing dozens of real installs — 41s even on a fast Mac
(much worse on the slow Windows I/O path), plus an install-heavy cluster.
Mechanism: MAX_FILES_PER_CHUNK=180 packed the whole ~171-file shard into ONE
`node --test` chunk, so the entire shard's wall-clock ran against a single
600s per-chunk backstop. On slow Windows runners that single chunk crossed
600s and was killed mid-run — an intermittent false-negative gate that also
hits `next` directly.
Fix: lower MAX_FILES_PER_CHUNK 180 -> 90 so each shard splits into ~2 chunks,
each with its own fresh 600s budget and a fresh node process (also relieves
per-process memory pressure). Verified locally: shard 1/3 now runs as
chunk 1/2 (90 files) + chunk 2/2 (81 files), 5323 tests, 0 fail. Also made the
timeout kill-message name slowness as a cause instead of asserting a leak, so
the next debugger isn't sent hunting a nonexistent handle leak.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
---------
Co-authored-by: Codesmith <codesmith-bot@users.noreply.github.com>
Co-authored-by: Cursor Agent <cursoragent@cursor.com>
Co-authored-by: Tom Boucher <trekkie@nomorestars.com>
Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com>
|
||
|
Tom Boucher
|
241b08fa18 |
ci(#1975): exclude release-tarball-smoke from scoped lane (fixes Windows chunk timeout)
This consolidation PR's breadth (28 changed test files) exposed a scoped-test-lane capacity limit: ci-test-scope pulls the 3–6 min release-tarball-smoke.install.test.cjs (npm pack + npm install -g, 10MB/1499 files) into the targeted+windows lane whenever install files change AND when it is itself a changed file — bundling it with the other 27 files overran the 600s per-chunk timeout on windows-latest-24 (deterministic). release-tarball-smoke has its OWN dedicated workflow (.github/workflows/install-smoke.yml, triggered on the production install paths), so its scoped-lane run is redundant. Add a SCOPED_LANE_EXCLUDE guard that drops it from both targeted_tests and windows_tests however it entered (matched rule OR changed-file), and remove it from the install rule's tests list. Update the ci-test-scope.test.cjs assertion accordingly. No coverage lost. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
6d072435d0 |
test(#1975): consolidate 51 CLI + scripts-tooling regression tests into module suites
Fold 51 issue-named CLI black-box + scripts-tooling regression files into their canonical module suites (runtime-launcher-parity, worktree-safety, install-*, managed-hooks, read-guard, capability-registry, etc.), plus a NEW slash-command-namespace.test.cjs grouping the 4 slash/colon-namespace-leak invariant suites that had no canonical owner. Verbatim block-scoped describe wrappers; 427 subtests conserved 1:1. Host-env pre-check (per B2): no CLI-receiving host sets a redirecting GSD_WORKSTREAM/GSD_PROJECT value. One folded suite (bug-3668 runtime resolver) creates an extension-less PATH gsd-tools stub + bash -c; co-locating it with the host's chmodSync tripped local/no-unguarded-nonportable-exec, so it's now Windows-guarded (skip on win32) matching the host suite's own bash -c guard. Regenerates regression-name allowlist (222->182), ratchets file-count allowlist (graphify 7->6, docs entry removed), makes 26 relocated allow-test-rule exemptions issue-ref-compliant (ADR-456; prunes stale ids). Repoints 13 tests/ references across CONTEXT.md, COMMANDS.md/FEATURES.md (EN + ja/ko/pt/zh) and ADR-0002. lint:ci green. Part of epic #1969. Closes #1975. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
697cbb1f05 |
test(#1977): consolidate 22 misc + repo-invariant regression tests
Final epic-#1969 batch. Fold 22 issue-named files: the 4 genuine repo-wide invariant scans (551-eslint-bin-lib-coverage, bug-3054 stale /gsd-next, bug-3810 no-gsd-sdk-runtime-refs, feat-3593 cli-negative-universal) into a NEW shared repo-invariants.test.cjs; the other 18 as singletons into their nearest module suite (model-resolver, codex-config, runtime-converters, security, state-transition, worktree-safety, roadmap-parser, etc.). Verbatim block-scoped describe wrappers; 334 subtests conserved 1:1. Host-env pre-check (B2+B6): the 6 CLI folds into GSD_TEST_MODE-setting hosts (model-resolver/ codex-config/runtime-converters) are benign — each origin independently sets GSD_TEST_MODE=1 itself (idempotent), unlike the B6 real-install case. Regenerates regression-name allowlist (222->213), ratchets file-count allowlist (state 17->16), makes 7 relocated allow-test-rule exemptions issue-ref-compliant (ADR-456; prunes stale ids). Repoints 2 tests/ refs in docs/TESTING-SUITES.md. lint:ci green. Part of epic #1969. Closes #1977. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
cb7ca4f3dc |
test(#1976): consolidate 17 agent regression tests into agent-contract suites
Fold 17 issue-named agent-markdown regression files into their canonical agent suites: agent-frontmatter (shared agent-body-contract catch-all: read-loop guards, retired-slash-ref bans, sycophancy hardening, doc-writer/code-fixer/review-fix/mapper contracts, write-truncation), planner-language-regression (planner directive/grep/phase contract), executor-mvp-tdd-section, verifier-behavior-unverified, intel, and research-agent-profiles. Verbatim block-scoped describe wrappers; 98 subtests conserved 1:1. All unit (markdown-content) tests — no CLI/env surface. No new files. Regenerates regression-name allowlist (222->207), ratchets file-count allowlist (intel entry removed, phase 4->3), makes 13 relocated allow-test-rule exemptions issue-ref- compliant (ADR-456; prunes stale ids). No CONTEXT.md/ADR refs named the moved files. lint:ci green. Part of epic #1969. Closes #1976. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
0cc7a1a426 |
test(#1974): consolidate 27 installer/hooks remainder tests into module suites
Fold 27 issue-named installer/hooks/statusline/migration/reapply regression files into their canonical module suites (installer-migrations, installer-migration-report, gsd-statusline, reapply-verify-hunks, install-*, gsd-check-update-worker-platform-gate, etc.). Verbatim block-scoped describe wrappers; 276 subtests conserved 1:1. No new files. The one subdir origin (tests/installer-migrations/001-legacy-orphan-files) moved up one level into installer-migrations.test.cjs; its single ../../ module require corrected to ../ so it resolves from tests/ root (verified). Host-env pre-check: no CLI-receiving host sets a redirecting GSD_WORKSTREAM/GSD_PROJECT value. Regenerates regression-name allowlist (222->205), ratchets file-count allowlist (verify 11->8, validate entry removed), makes 16 relocated allow-test-rule exemptions issue-ref- compliant (ADR-456; prunes stale ids). Repoints 15 tests/ references across state-md.md (EN + ja/ko/pt/zh). lint:ci green. Part of epic #1969. Closes #1974. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
2c32e8d890 |
test(#1973): consolidate 48 workflow regression tests into workflow-aspect suites
Fold 48 issue-named workflow-markdown regression files into the canonical test that owns each workflow aspect (execute-phase-*, plan-phase-*, quick-*, discuss-*, worktree-cleanup, secure-phase, verify, update, settings, etc.), across 32 existing suites. Verbatim block-scoped describe wrappers; 281 subtests conserved 1:1. No new test files. Host-env pre-check: only gsd-settings-advanced spawns CLI and it sets no GSD_WORKSTREAM/GSD_PROJECT value — no leak risk. Regenerates regression-name allowlist (222->181), ratchets file-count allowlist (verify 11->10), makes 30 relocated allow-test-rule exemptions issue-ref-compliant (ADR-456; prunes 30 stale ids). lint:ci green. Part of epic #1969. Closes #1973. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
85ed50cc4f |
test(#1972): consolidate 94 command/module regression tests into subject suites
Fold 94 issue-named command/module regression files into the canonical test file that owns each subject-under-test, across 52 existing suites (state, config, frontmatter, roadmap-parser, capability-registry, shell-command-projection-dispatch, plan-phase-drift-guard, health-validation, runtime-converters, commands, etc.). Verbatim block-scoped describe wrappers; 881 subtests conserved 1:1. No new test files. Host-env pre-check (per B2): the only GSD_WORKSTREAM/GSD_PROJECT-touching destinations (intel, planning-workspace) clear those vars hermetically, so folded CLI tests are safe. Regenerates regression-name allowlist (222->162), ratchets file-count allowlist across 8 buckets (validate entry removed after dropping <=2), makes 34 relocated allow-test-rule exemptions issue-ref-compliant (ADR-456; prunes 34 stale ids). Repoints CONTEXT.md + ADR-0002/443/1235/3524 test-file references. lint:ci green. Part of epic #1969. Closes #1972. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
de3ba45d00 |
test(#1971): consolidate 48 gsd-tools CLI regression tests into subcommand suites
Fold 48 issue-named gsd-tools CLI regression files into the canonical test file that owns each subcommand subject (state, roadmap, phase, milestone, audit, config, router/dispatch, stats, verify, health, etc.), preserving every assertion and its origin issue number as provenance (block-scoped describe wrappers, 299 subtests conserved 1:1). No monolithic gsd-tools.test.cjs created — routes into 18 existing per-subject suites. Removes 48 tests/ files. Regenerates regression-name allowlist (271->231), ratchets the file-count allowlist across 6 buckets (audit/milestone/phase/roadmap/state/verify), and makes 10 relocated allow-test-rule exemptions issue-ref-compliant (ADR-456; prunes 10 stale ids). Repoints one CONTEXT.md symptom ref and ADR-3524's parity-test ref. lint:ci green. Part of epic #1969. Closes #1971. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
4f779eda43 |
test(#1970): consolidate 61 install-suite regression tests into function suites
Fold 61 issue-named install/codex/runtime regression files into the canonical test file that owns each subject-under-test, preserving every assertion and its origin issue number as provenance (block-scoped describe wrappers, zero assertion loss — 652 subtests conserved 1:1). Routes: - codex-config.test.cjs +19 (codex config/toml/hooks/adapter/skill surface) - install.test.cjs +18 (node-runner norm, manifest, arg parse, finishInstall) - install-runtime-artifacts +13 (per-runtime conversion + emission) - install-minimal-hooks +6 (hook-event dialects + guards) - path-replacement +2 (opencode absolute pathPrefix) - install-write-confinement +2 (pristine dir writes) - install-regressions +1 (user-artifact preservation) Removes 61 tests/ files → 61 fewer CI processes. Regenerates the regression-name allowlist (271→222), ratchets the file-count allowlist (config 10→9, install 12→9), and makes 13 relocated allow-test-rule exemptions issue-ref-compliant (ADR-456; prunes 13 stale allowlist ids). Repoints ADR-0009's moved-test list. lint:ci green. Part of epic #1969. Closes #1970. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
5b5dbe059b |
feat(#1942): VS Code extension — repo-local IDE host with reachability proof (#1966)
* feat(#1942): VS Code extension — repo-local IDE host with reachability proof The VS Code extension (vscode/extension.js + vscode/package.json) is a repo-local, buildable extension (not Marketplace-published). The gsd.invoke handler dispatches in-process through the GSD command-routing hub. The handler is exported separately from activate() so it is testable without a VS Code host. tests/vscode-extension-reachability.test.cjs: proves the handler dispatches through the hub + returns a result (keystone wired); the manifest declares the command + engine; resolveEngineRoot finds the gsd-core/ dir. * docs(changeset): VS Code extension (#1966) * fix(#1942): register vscode/package.json in VERSIONED_MANIFESTS (#844) * fix(#1942): align vscode/package.json version with package.json (1.7.0-rc.1) |
||
|
Tom Boucher
|
b188c0d085 |
fix(#1967): build hooks/dist once upfront in run-tests to close scoped-CI empty-dir race (#1968)
* fix(#1967): build hooks/dist once upfront in run-tests to close scoped-CI empty-dir race hooks/dist/ is gitignored and not built by prepare (build:lib only), so the scoped CI lane starts with it absent. The first install test's before() hook triggers build-hooks.js, which creates DIST_DIR empty then fills it file-by- file; a concurrently-spawned install.js reader can observe the empty window and fail with 'Failed to install hooks: directory is empty' (intermittently failing e.g. bug-3683-workflow-colon-namespace-leak on scoped legs). Add ensureBuiltHooks() to scripts/run-tests.cjs — the same upfront chokepoint as ensureBuiltArtifacts — to build hooks/dist once, single-process, before any concurrent test spawns install.js. Completeness is checked against build-hooks.js HOOKS_TO_COPY (absent/empty/partial/zero-byte -> rebuild; complete -> no-op). Folds regression coverage into bug-969-test-infra-flake-hardening (Part C), proven fail-first (ensureBuiltHooks undefined on next). Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> * chore(#1967): set changeset pr to 1968 Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 4.8 <noreply@anthropic.com> |
||
|
Tom Boucher
|
2391632973 |
feat(#1855): add Claude plugin marketplace manifest
Add .claude-plugin/marketplace.json so Claude-plugin-compatible runtimes
(ZCODE et al.) discover gsd-core from a custom marketplace source. The
canonical version lives at plugins[0].version and tracks package.json via
the release version-sync.
Refactor scripts/sync-manifest-versions.cjs so VERSIONED_MANIFESTS entries
are {path, versionKey} dot-path descriptors (default 'version'); register
marketplace.json with versionKey 'plugins.0.version'. getByPath/setByPath
reject __proto__/constructor/prototype (prototype-pollution guard).
plugin.json / gemini-extension.json behavior is unchanged.
- tests/issue-1855-marketplace-manifest.test.cjs: schema + version-sync guard
- tests/issue-844-manifest-version-sync.test.cjs: updated for descriptor shape
- VERSIONING.md + auto-backmerge VERSION_STAMP_MANIFESTS: include marketplace.json
- docs/how-to/install-on-your-runtime.md: marketplace discovery how-to
|
||
|
Tom Boucher
|
d8bc1bc636 |
fix(#1831): add state-rebuild test files to lint-test-file-count allowlist
PRs #1829 and #1830 added tests/state-rebuild.test.cjs and tests/state-rebuild-cli.test.cjs but did not add them to the lint-test-file-count allowlist for the 'state' module. The lint-test-file-count.test.cjs harness reported FAIL_NOVEL_FILES with the two files listed as novel. Verified via gsd-test (--base origin/main --head origin/next): without this fix, 2/22097 tests fail (both lint-test-file-count allowlist cases). The state module has 17 test files; allowlist entry now lists all 17 alphabetically. Process note: the original PRs should have updated this allowlist in the same commit that added the test files. Recapture of the golden-install-parity fixtures is NOT required — those fixtures on next are correct (verified: no diff from UPDATE_GOLDEN=1 locally). |