golem15/msd-core
3
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
Files
15af0f5536fc4d33f66fb1927dcf70ebfa451b51
msd-core/docs/INVENTORY.md
Tom Boucher 2ea5efc151 enhance(#3911): hooks declare their crash policy (#3960) 
* enhance(#3911): give hooks an exit seam that needs no build

ADR-3889 Phase 7 foundation. The 19 shipped enforcement hooks hold 91 of the
epic's 128 terminators and cannot reach `terminateNow` today.

The obvious route — requiring `gsd-core/bin/lib/cli-exit.cjs`, as
gsd-agent-isolation-guard.js already does for two other modules — is rejected.
That precedent carries its own warning (#3582): those files are tsc output,
gitignored and absent on a raw plugin-marketplace or git-clone install, so the
hook must first call ensureRuntimeBuild() to self-heal. Making the module a
hook needs IN ORDER TO TERMINATE depend on a build inverts the dependency, and
its failure mode is precisely the fail-open this phase exists to remove: a
guard that cannot terminate cannot deny. `lint-hooks-runtime-build-seam`
already encodes that concern, and Design B would have had to add an
ensureRuntimeBuild() call to all 19 hooks to satisfy it.

So `hooks/lib/` becomes a third emit location for cli-exit and a fifth for the
registry, preserving the invariant `src/cli-exit.cts`'s own header states: it
imports nothing but node:fs and its sibling registry, and the generator
dual-emits that sibling alongside each copy so a relative require resolves next
to whichever copy loaded it. Shipping needed no change — build-hooks.js already
declares HOOKS_SUBDIRS_TO_COPY = ['lib'].

Proven, not asserted: the two files are copied into an otherwise-empty tmpdir
and a child process requires them and terminates — PASS exits 0, HOOK_DENY
exits 2 with the payload on both stdout and stderr. That test fails the moment
the hooks copy gains a require reaching outside hooks/lib/.

Also fixed inline: the registry's fifth target let any `--write` test overwrite
the real committed hooks/lib/exit-code-registry.js, because the test helper
derived only three of the other output paths. It now redirects all five, and a
regression test asserts every committed artifact is byte-identical after a
redirected write.

Install-tree goldens pick up the two new shipped paths across 11 runtimes —
insertions only, no removals. lint:ci was green while they were stale, so this
was found by regenerating rather than by a gate.

Verification runs on the remote runner.

Refs #3911

* enhance(#3911): declare a crash policy, and migrate the write guard

Adds `hooks/lib/hook-exit.js` — the hook-facing vocabulary over `terminateNow`,
hand-written because the cli-exit copy beside it is generated:

  allow(payload)          exit 0
  deny(payload, stderr?)  exit 2
  crash(onCrash, payload) whichever the hook DECLARED

`crash()` takes the policy as a required argument with no default, which is the
whole mechanism: fail-open by accident stops being expressible. A hook must
name ALLOW or DENY at the call site, and an unrecognized value terminates
INTERNAL rather than guessing. Fail-open stays legal; fail-open by omission
does not.

`gsd-write-guard.js` is the first hook migrated, all 12 sites, and it exposed a
gap in the seam. `terminateNow`'s doc comment justified its fd-2 write by
citing this hook's `emitBlock` — but modeled it as sending the same bytes to
both streams, when `emitBlock` actually sends full JSON to stdout and only the
bare `reason` string to stderr, because Kimi's hook bus feeds stderr verbatim
back to the model. Migrating as written would have turned a readable sentence
into a JSON blob for Kimi-backed agents.

#3911 requires both "all 19 hooks terminate through terminateNow" and "no
hook's effective default changes". Those are jointly satisfiable only by
teaching the seam to carry a distinct stderr payload, so `terminateNow` gains
an optional third argument: omitted, behavior is byte-for-byte what it was; a
string is written raw, which is exactly the Kimi case. The doc comment's
inaccurate claim about emitBlock is corrected in place.

Proven rather than asserted: the pre-migration file is reconstructed from HEAD
and driven with the same catastrophic-shrink payload as the migrated one —
exit code, stdout and stderr all byte-identical.

Verification runs on the remote runner.

Refs #3911

* enhance(#3911): all 19 hooks terminate through the seam

Migrates the remaining 18 enforcement hooks onto allow/deny/crash. An AST walk
now reports zero `process.exit(` call sites across every `hooks/*.js` — down
from the 91 the census measured.

Each hook with an outer catch declares its policy once, at module top, with the
reason that policy is right for that specific guard: a read guard that cannot
scan must not block the read; a statusline that renders every prompt must
degrade rather than crash; an injection scanner must not retroactively block a
result already returned. Those sentences are the deliverable — they are what
turns fail-open-by-accident into fail-open-on-purpose. No hook's effective
default changed.

Wiring exposed two defects, both fixed here rather than noted.

A SECOND stdout/stderr-splitting site turned up in `gsd-workflow-guard.js`'s
`emitForceAddBlock`, matching the pattern already known from the write guard —
full JSON to stdout, bare reason to stderr for the Kimi bus. It uses the
`stderrPayload` argument added in the previous commit, which is now carrying
its second real caller rather than one special case.

More seriously, `terminateNow` emitted both streams inside ONE try, so a
payload that failed to serialize aborted before the stderr write ever ran. The
two windsurf guards write nothing to stdout on a block and only a reason string
to stderr, so `deny(undefined, reason)` exited 2 with EMPTY stderr — a deny
that silently loses its reason, which is the exact "fails with success" class
this epic exists to close. The streams are now emitted independently, each with
its own guard, and `undefined` means "nothing to write for this stream" rather
than an error. Regression tests inject a throwing write on one fd and assert
the other still receives its payload; they fail against the single-try version.

Byte-identity was proven per hook, not assumed: each pre-change file is
reconstructed from HEAD and driven side by side with the migrated one across
its normal path, its deny path, malformed stdin and empty stdin — exit code,
stdout and stderr compared.

Verification runs on the remote runner.

Refs #3911

* enhance(#3911): harden the three shell hooks, and pin every hook's policy

`gsd-phase-boundary.sh`, `gsd-session-state.sh` and `gsd-validate-commit.sh`
gain `set -euo pipefail`.

The expected hazard did not materialize, and that is worth recording: every
intentionally-non-zero command in all three is already the condition of an
`if`/`elif`, which `set -e` never fires on, and none of them reads a
possibly-unset variable or pipes through a grep that may legitimately match
nothing. No `|| true` guards were needed. Each hook was still checked
command-by-command before the flags went in rather than after.

Twenty-one before/after cases across the three hooks — disabled and enabled,
planning and non-planning, missing STATE.md, malformed JSON, the Kimi payload
shape, quoted and unquoted `-m`, valid and over-long Conventional Commits —
all match on exit code, stdout and stderr.

The hardening is shown to actually fire, not merely added: with a stubbed
`node` that fails at the JSON-emit step, phase-boundary and session-state go
from silently exiting 0 with empty stdout to failing visibly with the error
surfaced. No such case could be constructed for `gsd-validate-commit.sh`,
whose every statement already sits inside an if-condition — recorded as
unproven rather than claimed.

`tests/hooks-crash-policy.test.cjs` adds the per-hook coverage the issue asks
for, table-driven over all 19 hooks rather than 76 hand-written cases: normal
allow, deny where a deny path exists, crash-honors-the-declared-policy, and an
unclosed-stdin case — the one `process.exitCode` structurally cannot serve. The
deny assertions encode each hook's ACTUAL stream split rather than a uniform
shape, since four of the six deliberately differ. A drift guard enumerates
`hooks/*.js` and fails if a terminating hook is ever added without a row.

Writing those tests surfaced two hooks that emit a block decision in their JSON
body and exit 0. Both were checked rather than assumed, and neither is a
fails-with-success: `gsd-read-injection-scanner.js` is PostToolUse, where the
tool has already run and exit 2 has no meaning, and `gsd-cursor-subagent-start.js`
follows Cursor's JSON-body protocol. They are deliberately left alone — a
mechanical sweep to `deny()` would have broken exactly these two.

Verification runs on the remote runner.

Refs #3911

* fix(#3838): the commit validator says when it could not validate

#3911 claims to subsume #3838. Measurement said otherwise, so this closes it
for real rather than by assertion.

`set -euo pipefail`, added earlier on this branch, does NOT fix #3838: bash
exempts a command used as an `if` condition from `set -e`, and all three of the
hook's swallow-and-pass sites are exactly that shape. Verified against the
hardened hook with a node shim that fails only the classifier call — a
non-conforming commit still exited 0 with empty stdout AND empty stderr,
indistinguishable from "your commit conforms". That is the defect verbatim.

All three sites named in #3838 now capture the real exit status instead of
consuming it as a condition, and each distinguishes its genuine negative from
"could not run":

- the classifier: 0 = is a git commit, 1 = genuinely not one, anything else =
  could not classify. Its `node -e` now wraps the require and the call in
  try/catch and exits 3 on a throw, so a broken require chain can never be
  mistaken for `isGitSubcommand` legitimately returning false — which is the
  arm that matters, since `token-scanner.cjs` is a gitignored build artifact
  and a fresh checkout lands there.
- the opt-in config read and the JSON command extraction get the same
  treatment.

On "could not run" the hook emits a diagnostic to stderr naming which check
failed and why, then exits 0. The issue confirms this is safe — it is a
PreToolUse hook, so stderr does not disturb the JSON protocol — and ranks it
the smallest sufficient fix. The gate still fails open, but it can no longer do
so silently, which is the whole complaint: a validator that disables itself
quietly costs more than one that is absent, because it is trusted.

Both controls are unchanged and pinned by tests: a conforming commit still
passes silently, a non-conforming one still exits 2 with its existing block
payload. The defect test asserts stderr is non-empty and names the failure; it
fails against the pre-fix hook.

Verification runs on the remote runner.

Refs #3911, #3838

* docs(#3911): document the hook crash-policy contract

Reference and Explanation via a new docs/features fragment (FEATURES.md is
generated from it), INVENTORY rows for the three new hooks/lib files, and an
ARCHITECTURE note on the hooks section.

How-To: docs/how-to/declare-a-hook-crash-policy.md, indexed from docs/README.md
— a hook author now has to choose and declare a crash policy, which is more
than one step and crosses into which harness protocol their hook speaks. It
covers allow/deny/crash, writing an ON_CRASH reason that is actually useful,
when a deny needs a distinct stderr payload, the two hooks whose harness reads
a JSON-body decision and must NOT use deny(), and what to do when a check
cannot run at all — with #3838 as the worked example.

Refs #3911

* test(#3911): prove the seam actually ships, and stop hand-rolling temp cleanup

Two review findings.

The acceptance criterion 'hooks/dist/** stays in parity via the build seam
(lint:hooks-runtime-build-seam)' was misstated and unmet: that lint checks
something else — that a hook requiring a compiled gsd-core/bin/lib module also
calls ensureRuntimeBuild(). Nothing exercised that the three new hooks/lib
files reach hooks/dist/lib at all. That gap is not theoretical: #770 is a
recorded ship-blocking bug where a new hook never shipped because a copy list
missed it. The suite now builds dist through the repo's own ensureBuiltHooks(),
byte-compares each shipped copy against its source, and spawns a child that
requires the SHIPPED dist copy and denies — which is what catches a copy that
exists but cannot resolve its sibling registry.

gsd-validate-commit.sh hand-duplicated mktemp/run/rm three times; one idempotent
trap on EXIT replaces them, guarded so cleanup cannot alter the exit status.
Behavior-neutral across five cases, with temp-file counts taken before and
after each run.

Refs #3911

* fix(#3911): stage transitive hook lib requires, not just one level

The remote run returned 7 failures across 3 real causes.

The important one is a PRODUCTION bug this phase exposed rather than caused.
`writeCursorHooksJson` scanned each hook script for `./lib/X` requires exactly
one level deep and never re-scanned the lib files it staged for their own
sibling requires. Nothing had a transitive lib dependency before, so the gap
was invisible. Adding hook-exit.js -> cli-exit.js -> exit-code-registry.js
made real Cursor installs ship a bundle that dies at require time with
MODULE_NOT_FOUND. It now walks to a fixed point, and a real installed Cursor
hook runs to completion.

The staging harness in shared-hooks-dir-resolution hand-copied its fixture, so
the injection scanner crashed at require time and its exit-1 was being read as
a policy decision. Migrated to copyScriptWithDeps, which walks the require
graph — the repo's recorded rule for this class, since adding another
copyFileSync keeps it alive for the next person.

The missing-lib-source test in cursor-hook-workspace-roots hardcoded which lib
file it expected to be named in the abort message; the same throw now fires for
a different file first. Its assertion is unchanged in substance — staging still
must abort rather than ship a broken hook — only the name is no longer pinned.

The last one was my own test asserting an uppercase reason code. Measured
against origin/next: the pre-change hook emits the same lowercase
'config_unreadable', so the test was wrong, not the migration. Corrected to the
real value rather than making the code match the test.

Verification runs on the remote runner.

Refs #3911

* chore(#3911): regenerate the cursor install-tree golden

The staging fix means a Cursor install now correctly carries the two
transitive lib files it was silently missing. Additive only — no path was
removed. The golden diff is the evidence the packaging defect was real.

Refs #3911

* chore(#3911): backfill the changeset PR number

Refs #3911

* fix(#3911): a git probe that timed out is not a negative

A macOS CI lane failed three deny cases at 2084ms, 2112ms and 2177ms — just
past the 2000ms budget these hooks give their git probes. The three that passed
took 72ms, 595ms and 651ms. Under shard contention `git rev-parse` overruns,
the hook reads the non-zero result as "not a git repo", and allows with exit 0
and empty stdout AND empty stderr. Under load, the guards silently stop
guarding. That is ADR-3889's thesis exactly, sitting inside the security hooks
this phase is about.

The repo had already recognized the class in one place — gsd-cursor-subagent-start.js
fail-closed-denies on `git_timed_out` (#3045) — but nowhere else.

`hooks/lib/git-probe.js` classifies a probe's outcome, distinguishing a real
non-zero exit from ETIMEDOUT, a signal kill, and a spawn failure, rather than
folding all four into `status !== 0`. Three guards route their eight git probes
through it.

The resolution is the same shape #3838 took, and the same one that issue
endorsed as smallest-sufficient: fail open, but loudly. **No exit code changes
on any path** — a developer on a loaded machine is still not blocked, which
keeps #3911's declaration-pass contract intact for exit codes. What changes is
that the hook now says on stderr which probe could not answer, instead of
presenting silence as a clean verdict.

Scope was checked across every hooks/*.js, not just the three that failed:
gsd-agent-isolation-guard spawns no git; gsd-statusline's two probes gate only
a cosmetic display segment, not an allow/deny decision, and are left alone.

The C2 deny assertion was a real-race test — it demanded exit 2 while a slow
git legitimately yields 0. It now requires the hook to either deny, or allow
with a diagnostic naming the probe that could not run; a silent allow still
fails, so the assertion is not vacuous. A deterministic regression stubs git on
PATH to sleep past the budget rather than waiting for load to reproduce it.

Verification runs on the remote runner.

Refs #3911

* test(#3911): a PATH shim cannot intercept the hooks' git spawn on Windows

The deterministic timeout regression stubbed git on PATH and asserted the
guard reports rather than silently allows. It passes on Linux and macOS and
failed on Windows in 83ms and 176ms — the stub was never invoked at all.

Mechanism: the hooks call spawnSync('git', args) with no shell:true, so on
Windows CreateProcess resolves git.exe only and never a PATH .cmd shim. The
git.cmd branch could not have worked and is removed rather than left implying
a Windows path that does. Adding shell:true to the hooks to serve a test would
change product behavior and widen an injection surface, so the case is skipped
on win32 only, with the mechanism written into the skip reason so a future
reader does not 'fix' it that way.

Linux and macOS keep the coverage, and macOS is where the underlying fail-open
was actually caught.

Refs #3911

---------

Co-authored-by: sim <sim@local>
2026-08-27 22:21:10 -04:00

743 lines
124 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# GSD Shipped Surface Inventory
> Authoritative roster of every shipped GSD surface: commands, agents, workflows, references, CLI modules, and hooks. Where the broad docs (AGENTS.md, COMMANDS.md, ARCHITECTURE.md, CLI-TOOLS.md) diverge from the filesystem, treat this file and the repository tree itself as the source of truth.
## How To Use This File
- The machine-readable roster lives in `docs/INVENTORY-MANIFEST.json` (regenerated by `scripts/gen-inventory-manifest.cjs --write`). For live counts, run `ls agents/gsd-*.md | wc -l` etc. against the checkout.
- This file enumerates every shipped surface across all six families (agents, commands, workflows, references, CLI modules, hooks). Broad docs may render narrative or curated subsets; when they disagree with the filesystem, this file and the directory listings are authoritative.
- New surfaces should land here first, then propagate to the broad docs. `tests/inventory-manifest-sync.test.cjs` anchors both halves: the manifest against the filesystem, and this file's rows against the manifest (#3762). The second half cannot be regenerated — a role sentence is hand-written by design, so re-running `gen-inventory-manifest.cjs` never clears it.
This is the authoritative roster of every shipped GSD Core surface. See the [docs index](README.md) to navigate by topic.
---
## Agents
Full roster at `agents/gsd-*.md`. The "Primary doc" column flags whether [`docs/AGENTS.md`](AGENTS.md) carries a full role card (*primary*), a short stub in the "Advanced and Specialized Agents" section (*advanced stub*), or no coverage (*inventory only*).
| Agent | Role (one line) | Spawned by | Primary doc |
|-------|-----------------|------------|-------------|
| gsd-project-researcher | Researches domain ecosystem before roadmap creation (stack, features, architecture, pitfalls). | `/gsd-new-project`, `/gsd-new-milestone` | primary |
| gsd-phase-researcher | Researches implementation approach for a specific phase before planning. | `/gsd-plan-phase` | primary |
| gsd-ui-researcher | Produces UI design contracts for frontend phases. | `/gsd-ui-phase` | primary |
| gsd-assumptions-analyzer | Produces evidence-backed assumptions for discuss-phase (assumptions mode). | `discuss-phase-assumptions` workflow | primary |
| gsd-advisor-researcher | Researches a single gray-area decision during discuss-phase advisor mode. | `discuss-phase` workflow (advisor mode) | primary |
| gsd-research-synthesizer | Combines parallel researcher outputs into a unified SUMMARY.md. | `/gsd-new-project` | primary |
| gsd-planner | Creates executable phase plans with task breakdown and goal-backward verification. | `/gsd-plan-phase`, `/gsd-quick` | primary |
| gsd-roadmapper | Creates project roadmaps with phase breakdown and requirement mapping. | `/gsd-new-project` | primary |
| gsd-executor | Executes GSD plans with atomic commits and deviation handling. | `/gsd-execute-phase`, `/gsd-quick` | primary |
| gsd-plan-checker | Verifies plans will achieve phase goals (8 verification dimensions). | `/gsd-plan-phase` (verification loop) | primary |
| gsd-integration-checker | Verifies cross-phase integration and end-to-end flows. | `/gsd-audit-milestone` | primary |
| gsd-ui-checker | Validates UI-SPEC.md design contracts against quality dimensions. | `/gsd-ui-phase` (validation loop) | primary |
| gsd-verifier | Verifies phase goal achievement through goal-backward analysis. | `/gsd-execute-phase` | primary |
| gsd-nyquist-auditor | Fills Nyquist validation gaps by generating tests. | `/gsd-validate-phase` | primary |
| gsd-ui-auditor | Retroactive 6-pillar visual audit of implemented frontend code. | `/gsd-ui-review` | primary |
| gsd-dom-verifier | Observes a live DOM and reports which of a wave's stated UI acceptance criteria hold. Additive; never blocks. | `execute:wave:post` step hook (`live-dom-uat` capability) | primary |
| gsd-codebase-mapper | Explores codebase and writes structured analysis documents. | `/gsd-map-codebase` | primary |
| gsd-debugger | Investigates bugs using scientific method with persistent state. | `/gsd-debug`, `/gsd-verify-work` | primary |
| gsd-user-profiler | Scores developer behavior across 8 dimensions. | `/gsd-profile-user` | primary |
| gsd-doc-writer | Writes and updates project documentation. | `/gsd-docs-update` | primary |
| gsd-doc-verifier | Verifies factual claims in generated documentation. | `/gsd-docs-update` | primary |
| gsd-security-auditor | Verifies threat mitigations from PLAN.md threat model. | `/gsd-secure-phase` | primary |
| gsd-pattern-mapper | Maps new files to closest existing analogs; writes PATTERNS.md for the planner. | `/gsd-plan-phase` (between research and planning) | advanced stub |
| gsd-debug-session-manager | Runs the full `/gsd-debug` checkpoint-and-continuation loop in isolated context so main stays lean. | `/gsd-debug` | advanced stub |
| gsd-code-reviewer | Reviews source files for bugs, security issues, and code-quality problems; produces REVIEW.md. | `/gsd-code-review` | advanced stub |
| gsd-code-fixer | Applies fixes to REVIEW.md findings with atomic per-fix commits; produces REVIEW-FIX.md. | `/gsd-code-review --fix` | advanced stub |
| gsd-ai-researcher | Researches a chosen AI framework's official docs into implementation-ready guidance (AI-SPEC.md §3–§4b). | `/gsd-ai-integration-phase` | advanced stub |
| gsd-domain-researcher | Surfaces domain-expert evaluation criteria and failure modes for an AI system (AI-SPEC.md §1b). | `/gsd-ai-integration-phase` | advanced stub |
| gsd-eval-planner | Designs structured evaluation strategy for an AI phase (AI-SPEC.md §5–§7). | `/gsd-ai-integration-phase` | advanced stub |
| gsd-eval-auditor | Retroactive audit of an AI phase's evaluation coverage; produces EVAL-REVIEW.md (COVERED/PARTIAL/MISSING). | `/gsd-eval-review` | advanced stub |
| gsd-framework-selector | ≤6-question interactive decision matrix that scores and recommends an AI/LLM framework. | `/gsd-ai-integration-phase` | advanced stub |
| gsd-intel-updater | Writes structured intel files (`.planning/intel/*.json`) used as a queryable codebase knowledge base. | `/gsd-map-codebase --query` | advanced stub |
| gsd-doc-classifier | Classifies a single planning document as ADR, PRD, SPEC, DOC, or UNKNOWN; spawned in parallel to process the doc corpus. | `/gsd-ingest-docs` | advanced stub |
| gsd-doc-synthesizer | Synthesizes classified planning docs into a single consolidated context with precedence rules, cycle detection, and three-bucket conflicts report. | `/gsd-ingest-docs` | advanced stub |
| gsd-mempalace-curator | Ship-time MemPalace curation — diary entry, cross-project tunnel proposals, wing-scoped sync pruning, and extract-learnings → KG mirroring with provenance. | MemPalace capability at `ship:post` | advanced stub |
**Coverage note.** `docs/AGENTS.md` gives full role cards for the primary agents plus concise stubs for the advanced agents. The Agent Tool Permissions Summary in that file covers only the primary agents; the advanced agents' tool lists are captured in their per-agent frontmatter in `agents/gsd-*.md`.
---
## Commands
Full roster at `commands/gsd/*.md`. The groupings below mirror `docs/COMMANDS.md` section order; each row carries the command name, a one-line role derived from the command's frontmatter `description:`, and a link to the source file. `tests/command-count-sync.test.cjs` locks the count against the filesystem.
### Namespace Meta-Skills
These six routers are descriptor-only entries that the model picks first; the body of each contains a routing table that points at the correct concrete sub-skill. They exist to keep the eager skill-listing token cost low while the full surface remains reachable. See [#2792](https://github.com/open-gsd/gsd-core/issues/2792) for the rationale; the routing tables target the post-[#2790](https://github.com/open-gsd/gsd-core/issues/2790) consolidated surface.
| Command | Role | Source |
|---------|------|--------|
| `/gsd-workflow` | Phase pipeline router — discuss / plan / execute / verify / phase / progress / next. | [commands/gsd/ns-workflow.md](../commands/gsd/ns-workflow.md) |
| `/gsd-project` | Project lifecycle router — milestones, audits, summary. | [commands/gsd/ns-project.md](../commands/gsd/ns-project.md) |
| `/gsd-quality` | Quality-gate router — code review, debug, audit, security, eval, ui. | [commands/gsd/ns-review.md](../commands/gsd/ns-review.md) |
| `/gsd-context` | Codebase-intelligence router — map, graphify, docs, learnings. | [commands/gsd/ns-context.md](../commands/gsd/ns-context.md) |
| `/gsd-manage` | Management router — config, workspace, workstreams, thread, update, ship, inbox. | [commands/gsd/ns-manage.md](../commands/gsd/ns-manage.md) |
| `/gsd-ideate` | Exploration & capture router — explore, sketch, spike, spec, capture. | [commands/gsd/ns-ideate.md](../commands/gsd/ns-ideate.md) |
### Core Workflow
| Command | Role | Source |
|---------|------|--------|
| `/gsd-new-project` | Initialize a new project with deep context gathering and PROJECT.md. | [commands/gsd/new-project.md](../commands/gsd/new-project.md) |
| `/gsd-onboard` | Guide existing codebase onboarding through mapping, docs ingest, project setup, and onboarding summary. | [commands/gsd/onboard.md](../commands/gsd/onboard.md) |
| `/gsd-workspace` | Manage GSD workspaces — create (`--new`), list (`--list`), or remove (`--remove`) isolated workspace environments. | [commands/gsd/workspace.md](../commands/gsd/workspace.md) |
| `/gsd-discuss-phase` | Gather phase context through adaptive questioning before planning. | [commands/gsd/discuss-phase.md](../commands/gsd/discuss-phase.md) |
| `/gsd-mvp-phase` | Plan a phase as a vertical MVP slice — user story, SPIDR splitting, then plan-phase. | [commands/gsd/mvp-phase.md](../commands/gsd/mvp-phase.md) |
| `/gsd-spec-phase` | Socratic spec refinement producing a SPEC.md with falsifiable requirements. | [commands/gsd/spec-phase.md](../commands/gsd/spec-phase.md) |
| `/gsd-ui-phase` | Generate UI design contract (UI-SPEC.md) for frontend phases. | [commands/gsd/ui-phase.md](../commands/gsd/ui-phase.md) |
| `/gsd-ai-integration-phase` | Generate AI design contract (AI-SPEC.md) via framework selection, research, and eval planning. | [commands/gsd/ai-integration-phase.md](../commands/gsd/ai-integration-phase.md) |
| `/gsd-plan-phase` | Create detailed phase plan (PLAN.md) with verification loop. | [commands/gsd/plan-phase.md](../commands/gsd/plan-phase.md) |
| `/gsd-plan-review-convergence` | Cross-AI plan convergence loop — replan with review feedback until no HIGH concerns or actionable non-HIGH findings remain (max 3 cycles). | [commands/gsd/plan-review-convergence.md](../commands/gsd/plan-review-convergence.md) |
| `/gsd-ultraplan-phase` | [BETA] Offload plan phase to Claude Code's ultraplan cloud — drafts remotely, review in browser, import back via `/gsd-import`. Claude Code only. | [commands/gsd/ultraplan-phase.md](../commands/gsd/ultraplan-phase.md) |
| `/gsd-spike` | Rapidly spike an idea with throwaway experiments; use `--wrap-up` to package findings as a persistent skill. | [commands/gsd/spike.md](../commands/gsd/spike.md) |
| `/gsd-sketch` | Rapidly sketch UI/design ideas using throwaway HTML mockups; use `--wrap-up` to package findings. | [commands/gsd/sketch.md](../commands/gsd/sketch.md) |
| `/gsd-execute-phase` | Execute all plans in a phase with wave-based parallelization. | [commands/gsd/execute-phase.md](../commands/gsd/execute-phase.md) |
| `/gsd-verify-work` | Validate built features through conversational UAT with auto-diagnosis. | [commands/gsd/verify-work.md](../commands/gsd/verify-work.md) |
| `/gsd-ship` | Create PR, run review, and prepare for merge after verification. | [commands/gsd/ship.md](../commands/gsd/ship.md) |
| `/gsd-fast` | Execute a trivial task inline — no subagents, no planning overhead. | [commands/gsd/fast.md](../commands/gsd/fast.md) |
| `/gsd-quick` | Execute a quick task with GSD guarantees (atomic commits, state tracking) but skip optional agents. | [commands/gsd/quick.md](../commands/gsd/quick.md) |
| `/gsd-ui-review` | Retroactive 6-pillar visual audit of implemented frontend code. | [commands/gsd/ui-review.md](../commands/gsd/ui-review.md) |
| `/gsd-code-review` | Review source files changed during a phase for bugs, security, and code-quality problems; use `--fix` to auto-apply findings. | [commands/gsd/code-review.md](../commands/gsd/code-review.md) |
| `/gsd-eval-review` | Retroactively audit an executed AI phase's evaluation coverage; produces EVAL-REVIEW.md. | [commands/gsd/eval-review.md](../commands/gsd/eval-review.md) |
### Phase & Milestone Management
| Command | Role | Source |
|---------|------|--------|
| `/gsd-phase` | CRUD for phases — add (default), insert (`--insert`), remove (`--remove`), or edit (`--edit`) phases in ROADMAP.md. | [commands/gsd/phase.md](../commands/gsd/phase.md) |
| `/gsd-add-tests` | Generate tests for a completed phase based on UAT criteria and implementation. | [commands/gsd/add-tests.md](../commands/gsd/add-tests.md) |
| `/gsd-validate-phase` | Retroactively audit and fill Nyquist validation gaps for a completed phase. | [commands/gsd/validate-phase.md](../commands/gsd/validate-phase.md) |
| `/gsd-secure-phase` | Retroactively verify threat mitigations for a completed phase. | [commands/gsd/secure-phase.md](../commands/gsd/secure-phase.md) |
| `/gsd-audit-milestone` | Audit milestone completion against original intent before archiving. | [commands/gsd/audit-milestone.md](../commands/gsd/audit-milestone.md) |
| `/gsd-audit-uat` | Cross-phase audit of all outstanding UAT and verification items. | [commands/gsd/audit-uat.md](../commands/gsd/audit-uat.md) |
| `/gsd-audit-fix` | Autonomous audit-to-fix pipeline — find issues, classify, fix, test, commit. | [commands/gsd/audit-fix.md](../commands/gsd/audit-fix.md) |
| `/gsd-complete-milestone` | Archive completed milestone and prepare for next version. | [commands/gsd/complete-milestone.md](../commands/gsd/complete-milestone.md) |
| `/gsd-new-milestone` | Start a new milestone cycle — update PROJECT.md and route to requirements. | [commands/gsd/new-milestone.md](../commands/gsd/new-milestone.md) |
| `/gsd-milestone-summary` | Generate a comprehensive project summary from milestone artifacts. | [commands/gsd/milestone-summary.md](../commands/gsd/milestone-summary.md) |
| `/gsd-cleanup` | Archive accumulated phase directories from completed milestones. | [commands/gsd/cleanup.md](../commands/gsd/cleanup.md) |
| `/gsd-manager` | Interactive command center for managing multiple phases from one terminal. | [commands/gsd/manager.md](../commands/gsd/manager.md) |
| `/gsd-workstreams` | Manage parallel workstreams — list, create, switch, status, progress, complete, resume. | [commands/gsd/workstreams.md](../commands/gsd/workstreams.md) |
| `/gsd-autonomous` | Run all remaining phases autonomously — discuss → plan → execute per phase. | [commands/gsd/autonomous.md](../commands/gsd/autonomous.md) |
| `/gsd-undo` | Safe git revert — roll back phase or plan commits using the phase manifest. | [commands/gsd/undo.md](../commands/gsd/undo.md) |
### Session & Navigation
| Command | Role | Source |
|---------|------|--------|
| `/gsd-next` | State-aware smart-entry launcher — reads project state, shows a contextual menu, and dispatches one existing GSD command. | [commands/gsd/next.md](../commands/gsd/next.md) |
| `/gsd-progress` | Check project progress, show context, and route to next action; use `--next` to advance automatically or `--do` to run a freeform task. | [commands/gsd/progress.md](../commands/gsd/progress.md) |
| `/gsd-capture` | Capture ideas, tasks, notes, and seeds — todo (default), `--note`, `--backlog`, `--seed`, or `--list` pending todos. | [commands/gsd/capture.md](../commands/gsd/capture.md) |
| `/gsd-stats` | Display project statistics — phases, plans, requirements, git metrics, timeline. | [commands/gsd/stats.md](../commands/gsd/stats.md) |
| `/gsd-pause-work` | Create context handoff when pausing work mid-phase. | [commands/gsd/pause-work.md](../commands/gsd/pause-work.md) |
| `/gsd-resume-work` | Resume work from previous session with full context restoration. | [commands/gsd/resume-work.md](../commands/gsd/resume-work.md) |
| `/gsd-explore` | Socratic ideation and idea routing — think through ideas before committing. | [commands/gsd/explore.md](../commands/gsd/explore.md) |
| `/gsd-review-backlog` | Review and promote backlog items to active milestone. | [commands/gsd/review-backlog.md](../commands/gsd/review-backlog.md) |
| `/gsd-thread` | Manage persistent context threads for cross-session work. | [commands/gsd/thread.md](../commands/gsd/thread.md) |
### Codebase Intelligence
| Command | Role | Source |
|---------|------|--------|
| `/gsd-map-codebase` | Analyze codebase with parallel mapper agents; use `--fast` for lightweight scan or `--query` for intel queries. | [commands/gsd/map-codebase.md](../commands/gsd/map-codebase.md) |
| `/gsd-graphify` | Build, query, and inspect the project knowledge graph in `.planning/graphs/`. | [commands/gsd/graphify.md](../commands/gsd/graphify.md) |
| `/gsd-extract-learnings` | Extract decisions, lessons, patterns, and surprises from completed phase artifacts. | [commands/gsd/extract-learnings.md](../commands/gsd/extract-learnings.md) |
| `/gsd-mempalace-recall` | Recall prior decisions, patterns, and surprises from MemPalace into MEMORY-RECALL.md before planning. | [commands/gsd/mempalace-recall.md](../commands/gsd/mempalace-recall.md) |
| `/gsd-mempalace-capture` | File a phase artifact (CONTEXT/PLAN/SUMMARY) verbatim into MemPalace and mirror decision facts into its temporal KG. | [commands/gsd/mempalace-capture.md](../commands/gsd/mempalace-capture.md) |
### Review, Debug & Recovery
| Command | Role | Source |
|---------|------|--------|
| `/gsd-review` | Request cross-AI peer review of phase plans from external AI CLIs. | [commands/gsd/review.md](../commands/gsd/review.md) |
| `/gsd-debug` | Systematic debugging with persistent state across context resets. | [commands/gsd/debug.md](../commands/gsd/debug.md) |
| `/gsd-forensics` | Post-mortem investigation for failed GSD workflows — analyzes git, artifacts, state. | [commands/gsd/forensics.md](../commands/gsd/forensics.md) |
| `/gsd-health` | Diagnose planning directory health and optionally repair issues. | [commands/gsd/health.md](../commands/gsd/health.md) |
| `/gsd-import` | Ingest external plans with conflict detection against project decisions. | [commands/gsd/import.md](../commands/gsd/import.md) |
| `/gsd-inbox` | Triage and review all open GitHub issues and PRs against project templates. | [commands/gsd/inbox.md](../commands/gsd/inbox.md) |
### Docs, Profile & Utilities
| Command | Role | Source |
|---------|------|--------|
| `/gsd-docs-update` | Generate or update project documentation verified against the codebase. | [commands/gsd/docs-update.md](../commands/gsd/docs-update.md) |
| `/gsd-ingest-docs` | Scan a repo for mixed ADRs/PRDs/SPECs/DOCs and bootstrap or merge the full `.planning/` setup with classification, synthesis, and conflicts report. | [commands/gsd/ingest-docs.md](../commands/gsd/ingest-docs.md) |
| `/gsd-profile-user` | Generate developer behavioral profile and Claude-discoverable artifacts. | [commands/gsd/profile-user.md](../commands/gsd/profile-user.md) |
| `/gsd-settings` | Configure GSD workflow toggles and model profile. | [commands/gsd/settings.md](../commands/gsd/settings.md) |
| `/gsd-config` | Configure GSD settings — workflow toggles (default), advanced knobs (`--advanced`), integrations (`--integrations`), or model profile (`--profile`). | [commands/gsd/config.md](../commands/gsd/config.md) |
| `/gsd-pr-branch` | Create a clean PR branch by filtering out `.planning/` commits. | [commands/gsd/pr-branch.md](../commands/gsd/pr-branch.md) |
| `/gsd-surface` | Toggle which skills are surfaced — apply a profile, list, or disable a cluster without reinstall. | [commands/gsd/surface.md](../commands/gsd/surface.md) |
| `/gsd-update` | Update GSD to latest version; use `--sync` to sync skills across runtimes or `--reapply` to reapply local patches. | [commands/gsd/update.md](../commands/gsd/update.md) |
| `/gsd-help` | Show available GSD commands and usage guide. | [commands/gsd/help.md](../commands/gsd/help.md) |
---
## Workflows
Full roster at `gsd-core/workflows/*.md`. Workflows are thin orchestrators that commands reference internally; most are not read directly by end users. Rows below map each workflow file to its role (derived from the `<purpose>` block) and, where applicable, to the command that invokes it.
| Workflow | Role | Invoked by |
|----------|------|------------|
| `add-backlog.md` | Add a backlog item to ROADMAP.md using 999.x numbering. | `/gsd-capture --backlog` |
| `add-phase.md` | Add a new integer phase to the end of the current milestone in the roadmap. | `/gsd-phase` (default) |
| `add-tests.md` | Generate unit and E2E tests for a completed phase based on its artifacts. | `/gsd-add-tests` |
| `add-todo.md` | Capture an idea or task that surfaces during a session as a structured todo. | `/gsd-capture` (default) |
| `ai-integration-phase.md` | Orchestrate framework selection → AI research → domain research → eval planning into AI-SPEC.md. | `/gsd-ai-integration-phase` |
| `analyze-dependencies.md` | Analyze ROADMAP.md phases for file overlap and semantic dependencies; suggest `Depends on` edges. | `/gsd-manager --analyze-deps` |
| `audit-fix.md` | Autonomous audit-to-fix pipeline — run audit, parse, classify, fix, test, commit. | `/gsd-audit-fix` |
| `audit-milestone.md` | Verify milestone met its definition of done by aggregating phase verifications. | `/gsd-audit-milestone` |
| `audit-uat.md` | Cross-phase audit of UAT and verification files; produces prioritized outstanding-items list. | `/gsd-audit-uat` |
| `autonomous.md` | Drive milestone phases autonomously — all remaining, a range, or a single phase. | `/gsd-autonomous` |
| `check-todos.md` | List pending todos, allow selection, load context, and route to the appropriate action. | `/gsd-capture --list` |
| `cleanup.md` | Archive accumulated phase directories from completed milestones. | `/gsd-cleanup` |
| `code-review-fix.md` | Auto-fix issues from REVIEW.md via gsd-code-fixer with per-fix atomic commits. | `/gsd-code-review --fix` |
| `code-review.md` | Review phase source changes via gsd-code-reviewer; produces REVIEW.md. | `/gsd-code-review` |
| `complete-milestone.md` | Mark a shipped version as complete — MILESTONES.md entry, PROJECT.md evolution, tag. | `/gsd-complete-milestone` |
| `diagnose-issues.md` | Orchestrate parallel debug agents to investigate UAT gaps and find root causes. | `/gsd-verify-work` (auto-diagnosis) |
| `discuss-phase-assumptions.md` | Assumptions-mode discuss — extract implementation decisions via codebase-first analysis. | `/gsd-discuss-phase` (when `discuss_mode=assumptions`) |
| `discuss-phase-power.md` | Power-user discuss — pre-generate all questions into a JSON state file + HTML UI. | `/gsd-discuss-phase --power` |
| `discuss-phase.md` | Extract implementation decisions through iterative gray-area discussion. | `/gsd-discuss-phase` |
| `mvp-phase.md` | Plan a phase as a vertical MVP slice — user story, SPIDR splitting, then plan-phase. | `/gsd-mvp-phase` |
| `do.md` | Route freeform text from the user to the best matching GSD command. | `/gsd-progress --do` |
| `docs-update.md` | Generate, update, and verify canonical and hand-written project documentation. | `/gsd-docs-update` |
| `edit-phase.md` | Edit any field of an existing phase in ROADMAP.md in place, preserving number and position. | `/gsd-phase --edit` |
| `eval-review.md` | Retroactive audit of an implemented AI phase's evaluation coverage. | `/gsd-eval-review` |
| `execute-phase.md` | Execute all plans in a phase using wave-based parallel execution. | `/gsd-execute-phase` |
| `execute-plan.md` | Execute a phase prompt (PLAN.md) and create the outcome summary (SUMMARY.md). | `execute-phase.md` (per-plan subagent) |
| `explore.md` | Socratic ideation — guide the developer through probing questions. | `/gsd-explore` |
| `debug.md` | Systematic debugging — subcommand routing, session creation, delegation to gsd-debug-session-manager. | `/gsd-debug` |
| `extract-learnings.md` | Extract decisions, lessons, patterns, and surprises from completed phase artifacts. | `/gsd-extract-learnings` |
| `fast.md` | Execute a trivial task inline without subagent overhead. | `/gsd-fast` |
| `forensics.md` | Forensics investigation of failed workflows — git, artifacts, and state analysis. | `/gsd-forensics` |
| `graduation.md` | Cluster recurring LEARNINGS.md items across phases and surface HITL promotion candidates. | `transition.md` (graduation_scan step) |
| `health.md` | Validate `.planning/` directory integrity and report actionable issues. | `/gsd-health` |
| `help.md` | Display the complete GSD Core command reference. | `/gsd-help` |
| `import.md` | Ingest external plans with conflict detection against existing project decisions. | `/gsd-import` |
| `inbox.md` | Triage open GitHub issues and PRs against project contribution templates. | `/gsd-inbox` |
| `ingest-docs.md` | Scan a repo for mixed planning docs; classify, synthesize, and bootstrap or merge into `.planning/` with a conflicts report. | `/gsd-ingest-docs` |
| `insert-phase.md` | Insert a decimal phase for urgent work discovered mid-milestone. | `/gsd-phase --insert` |
| `list-phase-assumptions.md` | Surface Claude's assumptions about a phase before planning. | `/gsd-discuss-phase --assumptions` |
| `list-seeds.md` | List and audit captured seeds (read-only), with optional status filter. | `/gsd-capture --list-seeds` |
| `list-workspaces.md` | List all GSD workspaces found in `~/gsd-workspaces/` with their status. | `/gsd-workspace --list` |
| `manager.md` | Interactive milestone command center — dashboard, inline discuss, background plan/execute. | `/gsd-manager` |
| `map-codebase.md` | Orchestrate parallel codebase mapper agents to produce `.planning/codebase/` docs. | `/gsd-map-codebase` |
| `milestone-summary.md` | Milestone summary synthesis — onboarding and review artifact from milestone artifacts. | `/gsd-milestone-summary` |
| `new-milestone.md` | Start a new milestone cycle — load project context, gather goals, update PROJECT.md/STATE.md. | `/gsd-new-milestone` |
| `new-project.md` | Unified new-project flow — questioning, research (optional), requirements, roadmap. | `/gsd-new-project` |
| `onboard.md` | Brownfield onboarding orchestration — map codebase, ingest docs, initialize planning, summarize next step. | `/gsd-onboard` |
| `new-workspace.md` | Create an isolated workspace with repo worktrees/clones and an independent `.planning/`. | `/gsd-workspace --new` |
| `next.md` | Detect current project state and automatically advance to the next logical step. | `/gsd-progress --next` |
| `node-repair.md` | Autonomous repair operator for failed task verification; invoked by `execute-plan`. | `execute-plan.md` (recovery) |
| `note.md` | Zero-friction idea capture — one Write call, one confirmation line. | `/gsd-capture --note` |
| `pause-work.md` | Create structured `.planning/HANDOFF.json` and `.continue-here.md` handoff files. | `/gsd-pause-work` |
| `plan-phase.md` | Create executable PLAN.md files with integrated research and verification loop. | `/gsd-plan-phase`, `/gsd-quick` |
| `plan-review-convergence.md` | Cross-AI plan convergence loop — replan with review feedback until no HIGH concerns or actionable non-HIGH findings remain. | `/gsd-plan-review-convergence` |
| `plant-seed.md` | Capture a forward-looking idea as a structured seed file with trigger conditions. | `/gsd-capture --seed` |
| `pr-branch.md` | Create a clean branch for pull requests by filtering `.planning/` commits. | `/gsd-pr-branch` |
| `profile-user.md` | Orchestrate the full developer profiling flow — consent, session scan, profile generation. | `/gsd-profile-user` |
| `progress.md` | Progress rendering — project context, position, and next-action routing. | `/gsd-progress` |
| `quick.md` | Quick-task execution with GSD guarantees (atomic commits, state tracking). | `/gsd-quick` |
| `reapply-patches.md` | Reapply local modifications after a GSD update. | `/gsd-update --reapply` |
| `remove-phase.md` | Remove a future phase from the roadmap and renumber subsequent phases. | `/gsd-phase --remove` |
| `remove-workspace.md` | Remove a GSD workspace and clean up worktrees. | `/gsd-workspace --remove` |
| `resume-project.md` | Resume work — restore full context from STATE.md, HANDOFF.json, and artifacts. | `/gsd-resume-work` |
| `review.md` | Cross-AI plan review via external CLIs; produces REVIEWS.md. | `/gsd-review` |
| `scan.md` | Rapid single-focus codebase scan — lightweight alternative to map-codebase. | `/gsd-map-codebase --fast` |
| `secure-phase.md` | Retroactive threat-mitigation audit for a completed phase. | `/gsd-secure-phase` |
| `session-report.md` | Session report — token usage, work summary, outcomes. | `/gsd-pause-work --report` |
| `settings.md` | Configure GSD workflow toggles and model profile. | `/gsd-settings`, `/gsd-config --profile` |
| `settings-advanced.md` | Configure GSD power-user knobs — plan bounce, timeouts, branch templates, cross-AI execution, runtime knobs. | `/gsd-config --advanced` |
| `settings-integrations.md` | Configure third-party API keys (Brave/Firecrawl/Exa), `review.models.<cli>` CLI routing, and `agent_skills.<agent-type>` injection with masked (`****<last-4>`) display. | `/gsd-config --integrations` |
| `ship.md` | Create PR, run review, and prepare for merge after verification. | `/gsd-ship` |
| `sketch.md` | Explore design directions through throwaway HTML mockups with 2-3 variants per sketch. | `/gsd-sketch` |
| `sketch-wrap-up.md` | Curate sketch findings and package them as a persistent `sketch-findings-[project]` skill. | `/gsd-sketch --wrap-up` |
| `smart-entry.md` | State-aware front door — classify the current project situation, present the matching menu, and dispatch exactly one existing GSD command (ADR-1787). | `/gsd-next` |
| `spec-phase.md` | Socratic spec refinement with ambiguity scoring; produces SPEC.md. | `/gsd-spec-phase` |
| `spike.md` | Rapid feasibility validation through focused, throwaway experiments. | `/gsd-spike` |
| `spike-wrap-up.md` | Curate spike findings and package them as a persistent `spike-findings-[project]` skill. | `/gsd-spike --wrap-up` |
| `stats.md` | Project statistics rendering — phases, plans, requirements, git metrics. | `/gsd-stats` |
| `sync-skills.md` | Cross-runtime GSD skill sync — diff and apply `gsd-*` skill directories across runtime roots. | `/gsd-update --sync` |
| `transition.md` | Phase-boundary transition workflow — workstream checks, state advancement. | `execute-phase.md`, `/gsd-progress --next` |
| `ui-phase.md` | Generate UI-SPEC.md design contract via gsd-ui-researcher. | `/gsd-ui-phase` |
| `ui-review.md` | Retroactive 6-pillar visual audit via gsd-ui-auditor. | `/gsd-ui-review` |
| `ultraplan-phase.md` | [BETA] Offload planning to Claude Code's ultraplan cloud; drafts remotely and imports back via `/gsd-import`. | `/gsd-ultraplan-phase` |
| `undo.md` | Safe git revert — phase or plan commits using the phase manifest. | `/gsd-undo` |
| `thread.md` | Create, list, close, or resume persistent context threads for cross-session work. | `/gsd-thread` |
| `update.md` | Update GSD to latest version with changelog display. | `/gsd-update` |
| `validate-phase.md` | Retroactively audit and fill Nyquist validation gaps for a completed phase. | `/gsd-validate-phase` |
| `verify-work.md` | Conversational UAT with auto-diagnosis — produces UAT.md and fix plans. | `/gsd-verify-work` |
> **Note:** Some workflows have no direct user-facing command (e.g. `execute-plan.md`, `transition.md`, `node-repair.md`, `diagnose-issues.md`) — they are invoked internally by orchestrator workflows. (The former `verify-phase` workflow — goal-backward verification with no loader of its own — was deleted in #1892; its still-live gates moved to `references/verifier-phase-gates.md` behind `gsd-verifier`.)
### Workflow Sub-Files
A workflow may own two kinds of sub-file. Both live under `gsd-core/workflows/<workflow>/` and
neither is separately invocable — the parent workflow reaches them.
| Subdirectory | What it holds | Manifest family | Roster |
|---|---|---|---|
| `<workflow>/steps/*.md` | Gated section bodies extracted by the fragment model (ADR-1671, epic #1671 Phases 6.1–6.3). The parent carries a `section_manifest`-gated stub; `gsd-core/workflows/section-manifest.json` names which step a given invocation reads. | `workflow_steps` | See `docs/INVENTORY-MANIFEST.json` for the authoritative per-file list |
| `<workflow>/modes/*.md` | Progressive-disclosure mode files (#717). The parent dispatches to exactly one; `discuss-phase/modes/` is the canonical example. | `workflow_modes` | `discuss-phase`, `help` |
Both families are keyed by `<workflow>/<subdir>/<file>.md` rather than a bare filename, because two
workflows may each own a step of the same name — `families.workflows` uses bare basenames and
cannot represent these without collision.
**Adding a step or mode file requires no hand-written row here.** Run
`node scripts/gen-inventory-manifest.cjs --write` (after `build:lib`) and the manifest picks it up;
`tests/inventory-manifest-sync.test.cjs` fails if you forget. The per-file roster deliberately lives
in `docs/INVENTORY-MANIFEST.json` rather than being duplicated in this table — 60 rows that must be
hand-maintained in lockstep with a generated artifact is the drift this file exists to catch.
---
## References
Full roster at `gsd-core/references/*.md`. References are shared knowledge documents that workflows and agents `@-reference`. The groupings below match [`docs/ARCHITECTURE.md`](ARCHITECTURE.md#references-gsd-corereferencesmd) — core, workflow, thinking-model clusters, and the modular planner decomposition.
### Core References
| Reference | Role |
|-----------|------|
| `checkpoints.md` | Checkpoint type definitions and interaction patterns. |
| `gates.md` | 4 canonical gate types (Confirm, Quality, Safety, Transition) wired into plan-checker and verifier. |
| `model-profiles.md` | Per-agent model tier assignments. |
| `model-profile-resolution.md` | Model resolution algorithm documentation. |
| `verification-patterns.md` | How to verify different artifact types. |
| `verification-overrides.md` | Per-artifact verification override rules. |
| `verifier-phase-gates.md` | Verifier-time gates eagerly imported by `gsd-verifier` (migrated from the retired `verify-phase` workflow, #1892): decision-coverage validation (#2492), test-quality audit, and infrastructure-phase human-verification scoping (#2504). |
| `planning-config.md` | Full config schema and behavior. |
| `security-asvs-levels.md` | OWASP ASVS level definitions for GSD threat modeling — per-level planner disposition rigor and auditor verification depth (L1 opportunistic, L2 standard, L3 comprehensive). |
| `git-integration.md` | Git commit, branching, and history patterns. |
| `git-planning-commit.md` | Planning directory commit conventions. |
| `questioning.md` | Dream-extraction philosophy for project initialization. |
| `tdd.md` | Test-driven development integration patterns. |
| `ui-brand.md` | Visual output formatting patterns. |
| `common-bug-patterns.md` | Common bug patterns for code review and verification. |
| `debugger-philosophy.md` | Evergreen debugging disciplines loaded by `gsd-debugger`. |
| `debugger-fix-acceptance.md` | Multi-signal fix-acceptance guardrail (anti-overfitting) loaded by `gsd-debugger`. |
| `debugger-sbfl.md` | Spectrum-based fault localization (Ochiai) pre-filter loaded by `gsd-debugger`. |
| `debugger-rca-branching.md` | RCA branching (fishbone + AND-gate) anti-single-cause discipline loaded by `gsd-debugger`. |
| `debugger-bug-taxonomy.md` | Bug-taxonomy classification (Bohrbug/Heisenbug/Concurrency) + technique routing table loaded by `gsd-debugger`. |
| `debugger-repro-hardening.md` | Regression-test hardening (PBT shrinking + oracle classification + boundary neighbors) loaded by `gsd-debugger`. |
| `debugger-prevention.md` | Prevention / blameless-postmortem output (5-Whys + why-not-caught + recurrence guard) loaded by `gsd-debugger`. |
| `debugger-semantic-recall.md` | Semantic knowledge-base recall via MemPalace (keyword-fallback) loaded by `gsd-debugger`. |
| `debugger-techniques.md` | Full step-by-step bodies for the 10 debugging techniques (binary search, delta debugging, git bisect, …) routed by `gsd-debugger`'s technique-selection table. |
| `verifier-wiring-patterns.md` | Data-flow trace procedure and the four wiring patterns (Component→API, API→Database, Form→Handler, State→Render) loaded by `gsd-verifier`. |
| `mandatory-initial-read.md` | Shared required-reading boilerplate injected into agent prompts. |
| `gsd-run-resolver.md` | Canonical `gsd_run` bootstrap resolver block; workflows reference this file instead of copying the shell probe. |
| `agent-skills-bootstrap.md` | Shared agent_skills self-load contract (query + Read + dedup guard) injected into all 22 consumer agents. |
| `project-skills-discovery.md` | Shared project-skills-discovery boilerplate injected into agent prompts. |
| `research-documentation-lookup.md` | Shared documentation-lookup protocol (Context7 MCP + guarded CLI fallback) injected into all researcher agents. |
| `research-philosophy.md` | Shared research philosophy (training-as-hypothesis, honest reporting, investigation-not-confirmation) injected into researcher agents. |
| `research-verification-protocol.md` | Shared research verification protocol (4 pitfalls + pre-submission checklist) injected into researcher agents. |
| `verify-command-path-resolvability.md` | Verify Command Path Resolvability dimension (#2401) loaded by `gsd-plan-checker`: how to consume the `{VERIFY_PATHS}` probe result (never re-run or hand-reason the filesystem), the severity/reason table, and report-never-prescribe rules. |
| `nyquist-compliance.md` | Dimension 8 checks 8a-8e (#3172) loaded by `gsd-plan-checker`: the VALIDATION.md gate, automated-verify presence, feedback-latency assessment, sampling continuity, Wave 0 completeness, and the Dimension 8 output table — extracted from the agent to stay under its LARGE size cap. |
| `failing-direction.md` | Check 8f, Stated Failing Direction (#3172), loaded by `gsd-plan-checker`: how to consume the `{FAILING_DIRECTIONS}` probe result, the status/severity table, the sentinel exemption, and the split between deterministic blockers and advisory vacuous-statement warnings. |
### Workflow References
| Reference | Role |
|-----------|------|
| `agent-contracts.md` | Formal interface between orchestrators and agents. |
| `context-budget.md` | Context window budget allocation rules. |
| `execute-phase-context-guard.md` | Context exhaustion guard step for `execute-phase` wave loop — `workflow.context_guard_mode` dispatch table (warn/auto/off) and POOR-tier pause-work trigger (#1452). |
| `execute-phase-requirement-revert.md` | Gap-report step for `execute-phase` — reverts this phase's own shared requirement IDs out of `Complete` in REQUIREMENTS.md before rendering a `gaps_found` report, scoped to `PHASE_REQ_IDS` so other phases' rows are untouched (#2388). |
| `execute-phase-response-language.md` | Response-language directive for `execute-phase` orchestrator output (questions, narration, report-template prose); extracted to keep the workflow under the frozen pre-phase-6 byte ceiling (#2402). |
| `execute-phase-quota-recovery.md` | Step 7.1 detail for `execute-phase` — `quota-exceeded` recovery: the opt-in `dynamic_routing.provider_escalation` ladder (swap provider, honor `Retry-After`, fail loudly when spent) and the default manual wait-for-reset prompt (#2296). |
| `execute-phase-between-wave-reset.md` | Between-wave manifest reset and worktree base refresh for waves 2+, plus the pre-wave cross-plan key-links dependency check (#1369). |
| `execute-phase-wave-guard.md` | Inter-wave worktree base re-check for wave N+1 — the harness caches the fork base, so a fresh worktree would otherwise be cut from the stale pre-wave base (#1369, #2652). |
| `offer-next.md` | The `offer_next` step body extracted from `execute-phase.md` — auto-advance routing and the no-transition check (#2537). |
| `continuation-format.md` | Session continuation/resume format. |
| `domain-probes.md` | Domain-specific probing questions for discuss-phase. |
| `edge-probe.md` | Spec-phase edge-completeness probe — 8-category edge taxonomy, shape classification, and the `requirements → checks → verifier` resolution model (Step 5.5). |
| `prohibition-probe.md` | Spec-phase prohibition-completeness probe — the two-stage adversarial-recall → precision protocol that surfaces the unwritten *must-NOT* constraints (values/safety/ethics), with status×verification (`test`/`judgment`) tiering and canon-referral breadcrumbs (Step 5.6); second adapter of the `probe-core` resolution model. |
| `ui-consideration-probe.md` | UI-phase state-completeness probe — the closed shape-rooted UI-state taxonomy (empty/loading/error/populated/partial/overflow/zero-one-many/long-text), element-cue relevance filter, and `{explicit, backstop}` tiering; third adapter of the `probe-core` model (ADR-550 D7), run at ui-phase Step 9.5; the MIXED axis routes open UX (real-time/a11y/i18n-RTL) to `domain-probes.md` (#1867). |
| `honest-verifier.md` | Verify-time abstention on non-inferable (`backstop`) truths — the truth-axis mirror of the prohibition judgment-tier disposition (ADR-550 D4): a `backstop` truth the verifier can't confirm with explicit evidence abstains → `human_needed` (reason `insufficient_spec`), never a silent pass (#1154). |
| `gate-prompts.md` | Gate/checkpoint prompt templates. |
| `loop-hook-dispatch.md` | Generic dispatch contract for consuming `gsd_run loop render-hooks <point> --raw` output in any host-loop workflow — envelope shape, per-kind dispatch rules (contribution/step/gate), and liveness banner. |
| `scout-codebase.md` | Phase-type→codebase-map selection table for discuss-phase scout step (extracted via the discuss-phase/modes progressive-disclosure split, #717). |
| `revision-loop.md` | Plan revision iteration patterns. |
| `reviewer-instances.md` | Custom reviewer instances for `/gsd-review` (#1517) — same-adapter multi-model review: config shape, resolution rules, invocation, and the REVIEWS.md contract. Lazily loaded by `review.md` when `review.reviewer_instances` is configured. |
| `universal-anti-patterns.md` | Universal anti-patterns to detect and avoid. |
| `worktree-branch-check.md` | Canonical spawn-time worktree HEAD/base guard (worktree_branch_check): verify-only and fail-closed — per-agent-branch assertion, protected-ref refusal (#2924), and an exact-base assertion that halts with `exit 42` on mismatch so the orchestrator (worktree lifecycle owner) performs recovery (#48). Embedded into worktree sub-agent prompts at dispatch. |
| `runtime-aware-dispatch.md` | Runtime-aware subagent dispatch protocol (#2508 Phase 4 Option A): before any `Agent(subagent_type="gsd-*")` call, resolve the type via `gsd_run query resolve-dispatch-type --requested <name> --raw`. On named-dispatch runtimes (Claude/OpenCode/…) the name is returned unchanged; on built-in-only runtimes (kimi-code) it maps to `coder`/`explore`/`plan` by role-suffix. The persona rides `${AGENT_SKILLS_<ROLE>}` (Phase 3) regardless. Documents why a PreToolUse-remap hook (the epic's original Option B) is infeasible — Kimi Code's hook API supports only allow/deny, not tool_input rewriting. |
| `dispatch-isolation-gate.md` | Canonical gate deciding whether a dispatch site may run an agent isolated (#2584/#2652): resolves `ISOLATION` from the negotiated `dispatch.isolation` capability — never from a runtime id — fails closed to `none`, resolves the host's declared `harnessFlag` instead of hardcoding Claude Code's `isolation="worktree"` literal, and degrades single-agent sites to sequential on `orchestrator-worktree` hosts. Read by `quick.md`, `diagnose-issues.md`, and `execute-plan.md`. |
| `worktree-path-safety.md` | Worktree guard suite: HEAD assertion, cwd-drift sentinel (step 0a, #3097), and absolute-path guard (step 0b, #3099) — loaded into executor spawn prompts via `<execution_context>`. |
| `untrusted-input-boundary.md` | Shared prompt-injection boundary (#1577) `@`-included by the 10 research/doc-ingest agents (`gsd-project-researcher`, `gsd-phase-researcher`, `gsd-ui-researcher`, `gsd-assumptions-analyzer`, `gsd-advisor-researcher`, `gsd-doc-classifier`, `gsd-doc-synthesizer`, `gsd-research-synthesizer`, `gsd-ai-researcher`, `gsd-domain-researcher`): treat fetched/read text as data-not-instructions, self-scan before use (PromptArmor 2507.15219), task-anchor (2504.20472), and fence quoted text with a fresh random delimiter per wrap (PPA 2506.05739). Prompt-level defense-in-depth (2503.00061); the hook scanner is a separate pattern pre-filter. |
| `artifact-types.md` | Planning artifact type definitions. |
| `phase-argument-parsing.md` | Phase argument parsing conventions. |
| `decimal-phase-calculation.md` | Decimal sub-phase numbering rules. |
| `workstream-flag.md` | Workstream active-pointer conventions (`--ws`). |
| `user-profiling.md` | User behavioral profiling detection heuristics. |
| `thinking-partner.md` | Conditional thinking-partner activation at decision points. |
| `autonomous-smart-discuss.md` | Smart-discuss logic for autonomous mode. |
| `autonomous-ui-design-contract.md` | Autonomous-mode step 3a.5 — resolve whether a frontend phase needs a UI-SPEC.md and generate one through active `plan:pre` hooks; always non-blocking. |
| `ios-scaffold.md` | iOS application scaffolding patterns. |
| `ai-evals.md` | AI evaluation design reference for `/gsd-ai-integration-phase`. |
| `api-coverage.md` | API-coverage gate reference (full-coverage-by-default) for the `ai-integration` capability's `verify:pre` blocking gate (#1562) — matrix format, trigger, tuning, detector CLI, and the seal-time outcome table naming every pass/block arm including `scope_unavailable` (#3909). |
| `ai-frameworks.md` | AI framework decision-matrix reference for `gsd-framework-selector`. |
| `executor-examples.md` | Worked examples for the gsd-executor agent. |
| `doc-conflict-engine.md` | Shared conflict-detection contract for ingest/import workflows. |
| `execute-mvp-tdd.md` | Runtime gate semantics for execute-phase under MVP+TDD — pre-task failing-test verification, end-of-phase blocking review. |
| `mvp-concepts.md` | Cross-reference index for the six MVP-related reference files; maps each file to its purpose and which workflow loads it. |
| `verify-mvp-mode.md` | UAT framing rules for MVP-mode phases — user-flow-first ordering, deferred technical checks, user-story-format guard. |
### Sketch References
References consumed by the `/gsd-sketch` workflow and its wrap-up companion.
| Reference | Role |
|-----------|------|
| `sketch-interactivity.md` | Rules for making HTML sketches feel interactive and alive. |
| `sketch-theme-system.md` | Shared CSS theme variable system for cross-sketch consistency. |
| `sketch-tooling.md` | Floating toolbar utilities included in every sketch. |
| `sketch-variant-patterns.md` | Multi-variant HTML patterns (tabs, side-by-side, overlays). |
### Thinking-Model References
References for integrating thinking-class models (o3, o4-mini, Gemini 2.5 Pro) into GSD workflows.
| Reference | Role |
|-----------|------|
| `thinking-models-debug.md` | Thinking-model patterns for debug workflows. |
| `thinking-models-execution.md` | Thinking-model patterns for execution agents. |
| `thinking-models-planning.md` | Thinking-model patterns for planning agents. |
| `thinking-models-research.md` | Thinking-model patterns for research agents. |
| `thinking-models-verification.md` | Thinking-model patterns for verification agents. |
### Modular Planner Decomposition
The `gsd-planner` agent is decomposed into a core agent plus reference modules to fit runtime character limits.
| Reference | Role |
|-----------|------|
| `planner-antipatterns.md` | Planner anti-patterns and specificity examples. |
| `planner-chunked.md` | Chunked mode return formats (`## OUTLINE COMPLETE`, `## PLAN COMPLETE`) for Windows stdio hang mitigation. |
| `planner-gap-closure.md` | Gap-closure mode behavior (reads VERIFICATION.md, targeted replanning). |
| `planner-guidance.md` | Expository planner guidance: philosophy, task types/sizing, interface-first ordering, user setup, dependency graph, granularity calibration, and structured-return templates. |
| `planner-reviews.md` | Cross-AI review integration (reads REVIEWS.md from `/gsd-review`). |
| `planner-revision.md` | Plan revision patterns for iterative refinement. |
| `planner-source-audit.md` | Planner source-audit and authority-limit rules. |
| `planner-mvp-mode.md` | Vertical-slice planning rules for MVP mode. |
| `planner-preconditions.md` | Emission rules for the optional `<precondition>` task element (issue #1949, Design by Contract): when to emit, the three cases (user_setup / prior-phase artifact / env-var), format, anti-patterns, and the contract triad mapping. |
| `planner-reversibility.md` | Canonical reversibility taxonomy for the optional `<reversibility>` task element (issue #1951): the three ratings (`reversible` / `costly` / `one-way`), the `checkpoint:decision` insertion rule for one-way doors, the `--no-reversibility-gates` override, and the checkpoint-fatigue anti-patterns. |
| `planner-human-verify-mode.md` | Rules for `workflow.human_verify_mode = end-of-phase`: suppress `checkpoint:human-verify` task emission and route deferred items via `<verify><human-check>`. |
| `planner-graphify-auto-update.md` | How `load_graph_context` surfaces `.last-build-status.json` auto-update state (running / failed / stale head) alongside the existing staleness annotation. Opt-in via `graphify.auto_update` (#3347). |
| `planner-interface-context.md` | Interface context rules for executors — how to extract key interfaces/types/exports from existing code and document new interfaces that downstream plans will consume. |
| `planner-load-graph-context.md` | Planner's load_graph_context step: knowledge-graph freshness + dependency-context query via the gsd_run launcher (extracted from gsd-planner.md). |
| `planner-verify-command-grounding.md` | Verify Command Grounding rules (#2401): inherit `prior_verify_commands` verbatim when the story repeats, prefer `npm --prefix <dir> run <script>` over `cd <dir> && npm run <script>`, and ground every authored path. |
| `planner-failing-direction.md` | Stated Failing Direction rules (#3172): every runnable `<automated>` carries a `<fails_when>` sibling naming an observable failure signal, the pairing and placeholder rules, the `MISSING` sentinel exemption, and the authoring test ("if this command were silently doing nothing, what would tell me?"). |
| `skeleton-template.md` | SKELETON.md template emitted for new-project Walking Skeleton (Phase 1 + `--mvp`). |
| `user-story-template.md` | User story format for MVP planning — "As a / I want to / So that" structured fields. |
| `specless-probe-fallback.md` | Spec-less probe fallback protocol — gate (toggle + per-section absence via the shared `spec-section` helper), the deterministic edge probe (mirrors spec-phase 5.5), the in-planner prohibition recall, and the `must_haves` authoring lift; consumed by plan-phase step 7.95 when a phase SPEC omits `## Edge Coverage` / `## Prohibitions` (ADR-857 Phase 6). |
| `spidr-splitting.md` | SPIDR splitting decomposition rules for handling large user stories in MVP mode. |
> **Subdirectory:** `gsd-core/references/few-shot-examples/` contains additional few-shot examples (`plan-checker.md`, `verifier.md`) that are referenced from specific agents. These are not among the top-level references.
---
## CLI Modules
Full listing: `gsd-core/bin/lib/*.cjs`.
| Module | Responsibility |
|--------|----------------|
| `installer-migrations/000-first-time-baseline.cjs` | Installer migration: records the first-time installer migration baseline scan — walks per-runtime install surfaces so pre-existing files are classified before any later migration runs |
| `installer-migrations/001-legacy-orphan-files.cjs` | Installer migration: removes manifest-managed legacy orphan hook files (`hooks/gsd-notify.sh`, `hooks/statusline.js`) |
| `installer-migrations/002-codex-legacy-hooks-json.cjs` | Installer migration: removes legacy Codex `hooks.json` GSD hook registrations |
| `installer-migrations/003-rename-get-shit-done-to-gsd-core.cjs` | Installer migration: removes stale legacy `get-shit-done/` runtime directory files after the rename to `gsd-core/` (#604) |<!-- gsd-allow-legacy-name -->
| `installer-migrations/004-prune-stale-pristine-snapshots.cjs` | Installer migration: removes stale `gsd-pristine/get-shit-done/` snapshot files left behind by the get-shit-done → gsd-core rename (#604, #934) |<!-- gsd-allow-legacy-name -->
| `installer-migrations/005-opencode-baseline-commands-dir.cjs` | Installer migration: baselines pre-existing OpenCode `commands/` (plural) files missed by migration 000's RUNTIME_SURFACES list (#2329 follow-up) |
| `installer-migrations/006-pi-extension-cjs-to-js.cjs` | Installer migration: retires pi's stale `extensions/gsd.cjs` after #2470 renamed the installed native extension to `extensions/gsd.js` |
| `installer-migrations/007-retire-config-root-commonjs-marker.cjs` | Installer migration: retires the config-root `{"type":"commonjs"}` marker that pre-#2544 installs wrote over `<configRoot>/package.json` |
| `installer-migrations/008-cursor-retire-commands-surface.cjs` | Installer migration: retires Cursor's duplicate `commands/` surface now that skills are the sole workflow surface (#2644) |
| `installer-migrations/009-pi-retire-reserved-hooks-dir.cjs` | Installer migration: retires pi's legacy `hooks/` directory after GSD's shared hook bundle moved to `gsd-hooks/` (#3023) |
| `installer-migrations/010-antigravity-retire-confighome-artifacts.cjs` | Installer migration: retires Antigravity's configHome `skills/`/`agents/` surfaces after the global layout moved to the `~/.gemini/config` home override (#3738) |
| `active-workstream-store.cjs` | Workstream source precedence and selection (CLI `--ws` > `GSD_WORKSTREAM` env > stored pointer); name validation and environment propagation |
| `adapter-declarative.cjs` | Declarative host-integration adapter — projects workflow artifacts through the install engine for hosts that declare a descriptor-driven surface (#1680) |
| `adapter-imperative.cjs` | Imperative host-integration adapter — binds the composed capability registry in-process for hosts that drive emission themselves (#1680) |
| `adr-parser.cjs` | ADR decision parser for plan-phase ingest express path; normalizes section synonyms, parses status/decision/scope fences, and enforces status rejection gates |
| `agent-command-router.cjs` | Thin CJS subcommand router adapter for `gsd-tools agent` |
| `agent-install-check.cjs` | Agent-installation probe — owns `getAgentsDir` and `checkAgentsInstalled`, the single resolution the health-diagnostic agent-install rule consumes (ADR-857, #1268) |
| `health-diagnostic-rules/agent-install.cjs` | Health-diagnostic rule: agent-installation-completeness check (W010) — the single `checkAgentsInstalled` call site's four mutually exclusive conditions, ported behavior-preserving from `cmdValidateHealth` (ADR-3180 §8.2/§8.3/§8.5, Phase 11, #3309) |
| `api-coverage.cjs` | API-coverage detector + matrix validator (#1562, #2365) — pure `detectApiIntegration` (fail-closed: same-clause verb+noun signal + `<Service> API/SDK` surface naming a real service; strips fenced code, inline code, and path-shaped tokens; external hosts count, first-party route paths do not) and `validateCoverageMatrix`/`parseCoverageMatrix`/`renderCoverageMatrix` for the COVERAGE.md artifact (incl. the `No external API integration: <reason>` declaration); STDIN CLI (`echo "$SCOPE" \| node .../api-coverage.cjs [--json]`, exit 0=detected/1=none/NO_INPUT=empty-or-whitespace-only stdin/UNAVAILABLE=stdin read failed — registry codes, ADR-3889 Phase 3, #3907); consumed by the `ai-integration` capability's `plan:pre` contribution and blocking `verify:pre` gate (`check api-coverage.verify-pre`) |
| `artifacts.cjs` | Canonical artifact registry — known `.planning/` root file names; used by `gsd-health` W019 lint |
| `assumption-delta.cjs` | Detects identity-model assumption transitions in phase text for discuss-phase assumptions mode (#1561); STDIN CLI (`echo "$PHASE_SECTION" \| node .../assumption-delta.cjs [--json]`, exit 0=detected/1=none/NO_INPUT=empty-or-whitespace-only stdin/UNAVAILABLE=stdin read failed — registry codes, ADR-3889 Phase 3, #3907) |
| `audit-command-router.cjs` | ADR-959 capability command router for `gsd-tools audit-uat` and `gsd-tools audit-open` — extracted from hardcoded cases in `gsd-tools.cjs`; dispatches to `uat.cjs:cmdAuditUat` and `audit.cjs:{auditOpenArtifacts,formatAuditReport}`; phase 4d-impl-3 |
| `audit.cjs` | Audit dispatch, audit open sessions, audit storage helpers |
| `capability-activation.cjs` | Capability activation resolver shared by config validation and capability-state consumers — resolves registry-owned config keys from raw runtime config without re-centralizing migrated settings |
| `capability-command-router.cjs` | ADR-2346 P2 host command router for `gsd-tools capability` — relocated verbatim from the former 706-line `case 'capability':` arm in `gsd-tools.cjs`; dispatched via `HOST_COMMAND_ROUTERS` in `runCommand`'s default case; wires `capability-lifecycle`/`-trust`/`-consent`/`-state`/`-writer`; hand-authored CJS (sibling of `ensure-runtime-build.cjs`) |
| `capability-consent.cjs` | User-owned capability consent store (#1459) — bounded, non-throwing JSON store at `${GSD_HOME\|\|homedir()}/.gsd/consent.json` (NEVER under a repo) keyed by `${realpath(projectRoot)} <id>`; exports `consentStorePath`/`readConsentStore`/`hasProjectConsent` (matches iff integrity AND disclosureSignature both match)/`recordProjectConsent` (atomic+durable write)/`revokeProjectConsent`; the authoritative consent signal that gates PROJECT-scope third-party capability activation so a forged/cloned project ledger no longer activates anything until the user consents on THIS machine |
| `capability-lock.cjs` | Shared cross-process lock primitive (#1459 finding 4) — the SINGLE hardened lockfile protocol used by BOTH capability-lifecycle (`.gsd/capabilities/.lock`) and capability-consent (`.consent.lock`); exports `acquireLock(lockPath, opts?)`/`releaseLock(handle)` with pid + process-start-time liveness identity, a hard deadman, and token+inode owner-safe release — NEVER stale-steals a verified-live same-host holder, reclaims only a provably-dead/unverifiable holder, never deadlocks; `opts.maxAttempts`/`opts.waitForFresh` let the consent store serialize genuinely-contended writers; `_setLockProbes`/`_resetLockProbes` are test seams |
| `capability-ledger.cjs` | Per-runtime install ledger (ADR-1244 D4) — atomic read/write of `.gsd-capabilities.json` recording `{ id, version, source, integrity, files[], sharedEdits[] }` per installed capability; exports `readLedger`/`writeLedger`/`recordInstall`/`removeEntry`/`reconcile` (orphan detection)/`readSmallRegularFile` (utf8) + `readSmallRegularFileBuffer` (raw bytes, the byte-exact consent-hash reader, #1459 finding 1); atomic commit point and reconciliation basis for Phase-4 upgrade/remove |
| `capability-lifecycle.cjs` | Capability lifecycle orchestration (ADR-1244 Phase 4, D5+D6) — composes the source resolver + ledger + trust gate into `installCapability`/`upgradeCapability`/`removeCapability`/`reconcileCapabilities`; ledger write is the commit point; upgrade is atomic stage-then-swap (old set aside, new swapped in, ledger committed, backup dropped) with deterministic crash recovery (`reconcileCapabilities` rolls forward/back to a fully-old-or-fully-new state); remove surgically strips only marker-stamped (`_gsdCapability`) shared-config entries, preserving user hand-edits; never executes capability code |
| `capability-loader.cjs` | Runtime Capability Registry overlay (ADR-1244 D2) — `loadRegistry({ includeInstalled })` composes the frozen first-party registry with a validated installed overlay read from `$GSD_HOME/.gsd/capabilities/<id>/` (global) and `<projectRoot>/.gsd/capabilities/<id>/` (project); first-party-wins on id/skill/agent/config collisions, reserved-namespace rejection, load-time `engines.gsd` re-gate (skip-with-warning), and gate-kind fail-open via `_overlay.blockedGates` — a loud warning (stderr + envelope `warnings`) naming the load failure and `gsd capability remove <id>` remediation; no gate injected (#2009); composes through the canonical `buildRegistry` so derived views never drift |
| `capability-registry.cjs` | Generated central Capability Registry — role-partitioned index of all co-located capability declarations (`capabilities/<id>/capability.json`); emitted by `scripts/gen-capability-registry.cjs --write` (ADR-894 §5) |
| `capability-source.cjs` | Capability source resolver (ADR-1244 D3) — `resolveCapabilitySource(spec, opts)` fetches and stages a capability from local path, git (https/ssh/git transports only), npm pack (no lifecycle scripts), tarball (sha512 integrity verify before extraction), or registry (stub); tar-slip/symlink rejection; atomic staging to `$GSD_HOME/.gsd/capabilities/<id>/`; no capability code executes during install |
| `capability-state.cjs` | Unified capability-state resolver (ADR-857 phase 4b/6) — composes install profile, runtime surface, and config activation into one per-capability view consumed by workflow hook rendering; exports pure `resolveCapabilityState`, reusable `resolveCapabilityRuntimeState`, and I/O handler `cmdCapabilityState`; command surface: `gsd-tools capability state [--config-dir <path>]` emitting `{ runtimeConfigDir, capabilities[] }` |
| `capability-trust.cjs` | Capability trust gate (ADR-1244 Phase 4, D5 + compatibility half of D6) — PURE policy module: `discloseExecutableSurfaces` (hooks/command modules/mcpServers), `evaluateInstallTrust` (compose source policy + reserved-namespace + engines gate + disclosure → allowed/requiresConsent/blockReasons), `evaluateSourceAllowed` (`strict_known_registries`: permissive/lockdown/host-allowlist), `checkEngines` (engines.gsd hard gate + `compatVersions` graceful-downgrade), `executableSetChanged` (auto-update re-consent trigger); no sandbox — see `docs/explanation/capability-trust-model.md` |
| `capability-validator.cjs` | Shared runtime-callable capability validator (ADR-1244 D2) — extracted from `scripts/gen-capability-registry.cjs` so the build-time generator and the runtime overlay loader share ONE validation implementation (generative-parity guarded); exports `validateCapability`/`validateCrossCapability`/`validateVersionEnvelope`/`validateConsumesGlobal`/… plus the closed-vocabulary sets and `SEMVER_RE` |
| `broken-windows.cjs` | Broken-windows ledger library (issue #1950) — typed IR + I/O for `.planning/WINDOWS.md` (cross-phase defect register); pure `parseLedger`/`renderLedger`/`appendWindow`/`markWaived`/`markFixed`/`openCount` + I/O `cmdWindowsStatus`/`cmdWindowsAppend`/`cmdWindowsWaive`/`cmdWindowsMarkFixed`; frozen `REASON` enum for typed-error assertions; CLI surface `gsd-tools windows status\|append\|waive\|fixed`. Generated from `src/broken-windows.cts` |
| `capability-writer.cjs` | Capability State Writer (ADR-1213) — write-side inverse of the resolver; projects desired per-capability enabled/gates onto surface + config substrates, then re-resolves (assert-and-report); exports `setCapabilityState` and I/O handler `cmdCapabilitySet`; command surface: `gsd-tools capability set <id> [--on\|--off] [--gate <key>=<true\|false>]` |
| `check-command-router.cjs` | Thin CJS subcommand router adapter for `gsd-tools check` |
| `claude-orchestration-command-router.cjs` | ADR-959 capability command router for Claude orchestration — workflow-backend detection and emission (#1143) |
| `claude-orchestration.cjs` | Claude Orchestration capability (#1143) — Workflow-tool backend detection + emitter; `detectWorkflowBackend` fail-closed gate (`{available, backend: 'workflow'\|'inline', reason}`, degrades to today's inline behavior unless every gate opens) and `emitWorkflowScript` (maps GSD's wave/plan model onto Workflow primitives: wave → sequential `parallel()` barriers, plan → `agent(...)` with per-plan worktree isolation mirroring the inline path). Pure, zero external dependencies, never throws; never invokes the Workflow tool itself |
| `cli-exit.cjs` | `ExitError` class and `runMain()` helper — CLI entrypoints throw `ExitError` instead of calling `process.exit()`; `runMain()` translates the outcome into `process.exitCode` so output flushes cleanly |
| `cjs-command-router-adapter.cjs` | Shared compatibility adapter for manifest-backed CJS command-family routers |
| `cli-skew-check.cjs` | Detects version skew when a stale global CLI shadows the project-local install (#1754) |
| `host-integration-adapters/cline-sdk-binding.cjs` | Cline SDK binding — pure AgentPlugin `beforeTool` planning-artifact guard and `createAgentModel` model-override resolution adapters, no `@cline/sdk` import (ADR-1239 Phase D, #2090) |
| `clock.cjs` | Injectable clock seam (now/sleep) for deterministic lock testing |
| `clusters.cjs` | Skill cluster definitions for the runtime surface module (ADR-0011 Phase 2) |
| `code-review-depth.cjs` | Pure resolver for a code review's depth tier (#2554); exports `resolveCodeReviewDepth({ flagDepth, configDepth, overrides, files, repoRoot })` (→ `{ ok, depth, resolvedDepth, source, matchedRule, downgraded, fileCount }` or `{ ok: false, errors }`), the frozen `REASON` enum, `DEPTH_TIERS`, `LARGE_SCOPE_THRESHOLD`, and the matching primitives `normalizeRelPath`/`ruleMatchesFile`; resolves `--depth=` flag → strongest matching `workflow.code_review_depth_overrides` rule (segment-aware path prefix, no globs) → `workflow.code_review_depth` → `standard`, and owns the >50-file `deep`→`standard` downgrade |
| `code-review-flags.cjs` | Typed flag parser for `/gsd-code-review`; exports `parseCodeReviewFlags(argv)` (→ `{ fix, all, auto, depth, files }`) and `resolveCodeReviewWorkflow(flags)` (→ `'code-review.md' \| 'code-review-fix.md'`); canonical dispatch seam for `--fix`/`--all`/`--auto` routing |
| `codex-agent-toml.cjs` | Typed IR (genuine leaf) for `~/.codex/agents/<agent>.toml` — `parseCodexAgentToml`/`renderCodexAgentToml` round-trip byte-identically; `stripModel`/`stripReasoningEffort` remove exactly one targeted line; `scanTomlLines`/`stripBOM`/`findDeveloperInstructionsBlockRange`/`unquoteTomlValue` are the lenient reader primitives moved here from `agent-install-check.cjs` (#3242 Phase 2); consumed by the Codex `.toml` sync (`commands.cjs cmdEffortSyncCodex`, ADR-2313 D7, #3243) |
| `command-aliases.cjs` | Alias/subcommand metadata for manifest-backed family routers |
| `commonjs-marker.cjs` | Ownership-guarded `{"type":"commonjs"}` marker used to pin GSD's staged `.js` scripts to CommonJS; exports `classifyMarker` (absent/gsd-owned/foreign, fail-closed), `ensureCommonJsMarker`, and `removeCommonJsMarker` so install and uninstall share one predicate and never touch a user-authored `package.json` (#2544) |
| `command-arg-projection.cjs` | Strict, `Result`-returning flag and positional argument projection helpers shared across command-family routers — `parseNamedArgs` rejects unrecognized flags and stray positionals instead of silently dropping them (ADR-3473 §8.4, #3884). Generated from `src/command-arg-projection.cts` |
| `command-roster.cjs` | Read-only discovery of canonical `commands/gsd/*.md` command stems for runtime artifact conversion and namespace rewrites |
| `command-routing-hub.cjs` | Pure-result dispatch hub that centralizes mode decision (SDK vs CJS), error taxonomy, and no-throw contract for all command-family routers (#3788) |
| `commands.cjs` | Misc CLI commands (slug, timestamp, todos, scaffolding, stats) |
| `complexity-trigger.cjs` | Pure leaf for the complexity-triggered refactor capability — analyzer, evaluator, and baseline persistence; wrapped by `refactor-trigger-command-router.cjs` (#1953) |
| `config-loader.cjs` | Project config loading — defaults merge, legacy-key migration, workstream overlay, unknown-key/profile-override validation (extracted from `core.cjs`, ADR-857) |
| `config-schema.cjs` | Single source of truth for `VALID_CONFIG_KEYS` and dynamic key patterns; imported by both the validator and the config-schema-docs parity test |
| `config-types.cjs` | TypeScript type definitions for the `model_policy` config block — `ModelPolicyConfig`, `TierEntry`, `RuntimeTiers`; compiled from `src/config-types.cts` at publish time (ADR-457) |
| `health-diagnostic-rules/config-validation.cjs` | Health-diagnostic rules: config.json validation checks (W003, W004, W022, E005, W008, W012-W016), reading only `snapshot.config`, ported behavior-preserving from `cmdValidateHealth` (ADR-3180 §8.2/§8.3/§8.5, Phase 11, #3309) |
| `config.cjs` | `config.json` read/write, section initialization; imports validator from `config-schema.cjs` |
| `configuration.cjs` | Configuration Module — legacy-key normalization, defaults merge, and explicit on-disk migration; pure normalization primitives consumed by `config-loader.cjs` and `config-schema.cjs` (loadConfig extracted to config-loader per ADR-857 #885) |
| `health-diagnostic-rules/consistency.cjs` | Health-diagnostic rules for `validate.consistency` only (C001-C004: gap in disk phase numbering, gap in plan numbering within a phase, orphan SUMMARY with no matching live PLAN, PLAN missing `wave` frontmatter) — a new `C0NN` code namespace parallel to `validate.health`'s `E`/`W`/`I` space, ported behavior-preserving from `cmdValidateConsistency` (ADR-3180 §8.4, Phase 12, #3310) |
| `context-composer.cjs` | Shared budget-composition seam (ADR-1671, #2929) — `composeWithinBudget` trims an ordered fragment list to a measured budget and returns a PLAN of surviving fragments, never rendered text, so one seam serves both the review pipeline and per-runtime emission. Closed strategy set: `verbatim`, `head-shrink`, `proportional-truncate` (with a per-fragment floor), `drop`. The budget unit is injected via `measure(text)` — tokens for `prompt-budget`, bytes for emission — with `charsPerUnit` as its inverse. Also exports `headShrink`/`tailTruncate`. Compiled from `src/context-composer.cts` |
| `context-predicates.cjs` | CONTEXT.md predicate fact-store parser (ADR-1671, #2928) — pure `parsePredicates` (extracts every backtick-wrapped `CLASS.subkey=value` declaration, fence/HTML-comment-aware), `selectPredicates` (class/prefix/contains selectors, ANDed), and `buildIndex` (deterministic, line-free artifact shape); backs both `gsd_run query context-predicates` and `scripts/gen-context-index.cjs`'s docs/CONTEXT-INDEX.json drift guard. Compiled from `src/context-predicates.cts` |
| `context-utilization.cjs` | Pure classifier for `gsd-health --context` — turns (tokensUsed, contextWindow) into a `{ percent, state }` triage result against the 60%/70% fracture-point thresholds (#2792) |
| `core-utils.cjs` | Shared low-level utilities — POSIX path normalization, sub-repo/subdirectory scanning, phase file stats, slug/one-liner/plan-id helpers, time-ago (extracted from `core.cjs`, ADR-857) |
| `core.cjs` | Shared utilities and runtime fallbacks; compatibility re-exports for planning-workspace and I/O (`io.cjs`) helpers |
| `coverage.cjs` | Deterministic SUMMARY `coverage:` block parser/validator/classifier for `gsd-tools uat classify-coverage`; routes deliverables to auto-pass vs human-UAT with a fail-safe default (#1602) |
| `decisions.cjs` | Parses CONTEXT.md `<decisions>` blocks; accepts numeric (D-42) and alphanumeric (D-INFRA-01) IDs; returns `{id, text, category, tags, trackable}` |
| `docs.cjs` | Docs-update workflow init, Markdown scanning, monorepo detection |
| `drift.cjs` | Post-execute codebase structural drift detector (#2003): classifies file changes into new-dir/barrel/migration/route categories and round-trips `last_mapped_commit` frontmatter |
| `edge-probe.cjs` | Spec-completeness edge probe (compiled from `src/edge-probe.cts`, gitignored) — the first adapter of the `probe-core` resolution model (ADR-550 Decision 7): shape classification, applicable-category relevance filter, edge proposal, and the `{explicit, backstop}` verification validators; delegates merge/rollup/CLI to `probe-core`; exports `classifyShape`, `applicableCategories`, `proposeEdges`, `analyzeCoverage`, `validateResolution`, `TAXONOMY` (#550) |
| `embedding-adapter.cjs` | Defines the minimal `HostIntegrationInterface` contract every embedding adapter implements (#1680) |
| `eval-command-router.cjs` | Routes the `eval.score` verb (compiled from `src/eval-command-router.cts`, gitignored) — thin dispatcher into the eval scoring module (#1579) |
| `eval.cjs` | Deterministic eval scoring (compiled from `src/eval.cts`, gitignored) — `computeEvalScore` (coverage*0.6 + infra*0.4, bands 80/60/40) + `cmdEvalScore` CLI domain guard; moves the gsd-eval-auditor's weighted arithmetic out of the prompt into code (#10 / #1579) |
| `estimate-cli.cjs` | I/O seam over `phase-estimation.cjs` — the `estimate-check` and `estimate-calibration` query verbs; reads the `workflow.smart_zone_tokens` budget and `.planning/estimation-calibration.json`, both degrading to defaults rather than failing planning (#2630) |
| `exit-code-registry.cjs` | Generated exit-code allocator — one number, one meaning table of registered process exit codes (band rules: `2` hook-adapter only, `64`-`78` generic, `80`-`125` domain); emitted by `scripts/gen-exit-code-registry.cjs --write` (ADR-3889 §1/§2); exports `EXIT_CODES` and the pure, total `exitCodeFor`/`nameForExitCode` |
| `observability/event.cjs` | DispatchEvent shape factory for every Hub dispatch — traceId/parentTraceId/command/result/timestamp record consumed by DispatchLogger (#177, ADR-0174 P1.3/P1.4) |
| `external-descriptor-trust.cjs` | Defense-in-depth path-containment check for third-party plugin descriptors (#1681) |
| `external-job.cjs` | Produces scheduler manifests for asynchronous external jobs; SLURM is the first backend (#1164) |
| `fallow-runner.cjs` | Fallow audit adapter for `/gsd-code-review`: binary resolution (`node_modules/.bin` then `PATH`), actionable missing-binary errors, and structural findings normalization |
| `federated-config.cjs` | Defensive merge of capability-declared config slices into the loadConfig return value — ADR-857 phase 3b; exports `mergeFederatedConfig({ configSchema, isCentralKey, userConfig })` → `{ values, validKeys, warnings }`; live for migrated Capability keys that are atomically removed from the central config schema |
| `frontmatter.cjs` | YAML frontmatter CRUD operations |
| `gap-checker.cjs` | Post-planning gap analysis (#2493): unified REQUIREMENTS.md + CONTEXT.md decisions vs PLAN.md coverage report (`gsd-tools gap-analysis`) |
| `gate-predicate-evaluator.cjs` | Evaluates capability gate predicates — `command-exit-zero` and `artifact-frontmatter` (#2008) |
| `git-base-branch.cjs` | Single base-branch resolver (`gsd_run query git.base-branch`) with full precedence ladder: config override → origin/HEAD symref → `git remote show origin` → local branch presence → "main". Eliminates per-workflow duplicated bash detection (#1146) |
| `graphify.cjs` | Knowledge-graph build/query/status/diff for `/gsd-graphify` |
| `graphify-command-router.cjs` | ADR-959 capability command router for `gsd-tools graphify` — dispatches build/query/status/diff subcommands; first real capability command cutover (phase 4d-impl-2) |
| `gsd2-import.cjs` | External-plan ingest for `/gsd-import --from-gsd2` |
| `handshake-serialized.cjs` | Serialized handshake for out-of-process host integration; JSON wire-safe (#1683) |
| `health-diagnostic-types.cjs` | Shared, dependency-free `SEVERITY`/`REMEDY_ACTION`/`REMEDY_RISK` enums and `Diagnostic`/`Remedy`/`Rule` types for `validate health` — split out of `health-diagnostic.cjs` so its rule-group files can depend on the enums/types without a CJS circular require back into the evaluator (ADR-3180 §8.2/§8.3/§8.5, Phase 11, #3309) |
| `health-diagnostic.cjs` | Frozen rule-table contract for `validate health` — `SEVERITY`/`REMEDY_ACTION`/`REMEDY_RISK` enums, `Diagnostic`/`Remedy`/`Rule` shapes, the fully-wired `RULES` table (the static concatenation of the 31 rules exported by the eight `health-diagnostic-rules/*.cjs` group files), `evaluateRules` (throws on duplicate rule codes), and `applyRepairs` (the real `--repair`/`--backfill` dispatcher with real per-action handlers — refuses `DESTRUCTIVE`-risk remedies) (ADR-3180 §8.2/§8.3/§8.5, Phase 11, #3309) |
| `hook-bus.cjs` | Abstracts the hook-bus ownership model — engine pub-sub, host-owned, or none (#1680) |
| `host-integration-sdk.cjs` | Versioned public API surface for external host-plugin authors (#1683) |
| `host-integration.cjs` | Host-Integration Interface (ADR-1239 Phase A) — negotiated capability contract over the six host-integration points; `negotiateHostCapabilities` fail-closes on undeclared/unknown/`undocumented` values, typed degradation ladder, host-capability profiles; the 8 `runtime.hostIntegration` axes are validated in `capability-validator.cjs` and sourced per-CLI in `docs/reference/host-integration-capability-matrix.md` |
| `host-runtime-detection.cjs` | Host Runtime Detection Module (ADR-2313 Phase 5, #3245) — the detection rung beneath `GSD_RUNTIME` and `.planning/config.json` `runtime` that lets `init` report `agent_runtime: codex` inside a Codex session instead of the hardcoded `claude` default; `detectHostRuntime` returns the typed `{runtime, source, signal}` from citation-backed Codex signals (`CODEX_SANDBOX`/`CODEX_SANDBOX_NETWORK_DISABLED`, else `CODEX_HOME` + `config.toml`), `resolveReportedRuntime` composes the full ladder. Pure, injectable, never writes, never shells out |
| `host-integration-adapters/imperative-hook-bus.cjs` | Imperative hook-bus adapter — descriptor-driven `hooks.json` binding generalized from the Cursor-specific writer, resolving the negotiated `hookBus` axis against a host's documented `hostBehaviors.managedHookEvents` list; pure, no I/O (ADR-1239 Phase D, #2089) |
| `init-command-router.cjs` | Thin CJS subcommand router adapter for `gsd-tools init` |
| `init.cjs` | Compound context loading for each workflow type |
| `install-effort-resolver.cjs` | Install-time effort resolution — `readGsdEffectiveEffortConfig` (merges `~/.gsd/defaults.json` + project `.planning/config.json`) + `resolveInstallTimeEffort`, extracted from `bin/install.js` (#2071) so `gsd-tools effort sync` can require it from the shipped runtime instead of the never-copied package-root installer; install.js imports them back (single source) |
| `install-engine.cjs` | Runtime-artifact install engine — `installRuntimeArtifacts`/`uninstallRuntimeArtifacts`/`installOpencodeFamilySkills` + their helpers, extracted from `bin/install.js` (ADR-1239 Phase B, #1679); install.js imports them back and injects `getCommitAttribution` |
| `install-fs-adapter.cjs` | Install Fs Adapter — narrow, enumerated fs seam for the `installRuntimeArtifacts` call tree (#2874, epic #2866 Phase 5, ADR-58's never-landed `cleanup` rollout step); a single ambient adapter (real fs in production, an injectable fake in tests) is swapped for the duration of one synchronous install via `withInstallFs`, extending the `deps` bag precedent already established by Runtime Artifact Install Plan Module rather than threading a new parameter through every call site; routes destination IO only — package-source lookups (`findInstallSourceRoot`, `findAgentsSourceRoot`, `readGsdCommandNames`) are deliberately unrouted, by design, not by omission |
| `install-model-override-resolver.cjs` | Install-time per-agent model-override resolution (#2256 / #2794) — `model_overrides[agent]` > `model_profile_overrides.<runtime>.<tier>` > omit, extracted from `bin/install.js`'s inline agent-staging loop (#2875 Part 2 / J8), which duplicated this exact precedence chain across two runtime branches (OpenCode/Kilo); mirrors `install-effort-resolver.cjs`'s existing extraction precedent so the descriptor-driven agents pipeline and `bin/install.js`'s own callers resolve through the SAME single source of truth |
| `install-profiles.cjs` | Install profile allowlist + skill staging for `--minimal` install (#2762); single source of truth for which `gsd-*` skills/agents land in runtime config dirs |
| `install-scope.cjs` | Install Scope Module — `resolveScope({id,runtime,...})` resolves the `'global'\|'local'` install-scope axis into `{id, configHome, settingsFile, consentRequired, hostPrecedenceRank}`, composing `resolveConfigHomeFromDescriptor` (`runtime-homes.cjs`) rather than modifying it (#2870, ADR-2866) |
| `install-shadow-report.cjs` | Cross-Scope Shadow Report Module (#2873, epic #2866 Phase 4a) — read-only projection over `installed-surface-resolver.cjs`'s `resolveInstalledSurfaces`; `buildShadowReport(runtime, opts)` filters `resolveTriggerSurface`'s `shadowedBy` groups down to triggers whose underlying stem genuinely exists in BOTH scopes' own manifests (not merely the union), and `renderShadowReport` projects the typed IR into bounded, sanitized (`sanitizeForRender` strips ANSI/C0-C1/bidi overrides) operator-console lines; consumed by both the installer and the W028 health rule so install-time and `/gsd-health` report identically |
| `health-diagnostic-rules/install-surface-shadowing.cjs` | Health-diagnostic rule: cross-scope trigger shadowing check (W028) — projects `install-shadow-report.cjs`'s `ShadowReport` as a WARNING-severity, ADVISE/`risk:NONE` diagnostic (never auto-fixable), reusing `agent-install.cjs`'s W010 runtime-resolution shape; degrades to `[]` (never throws) when nothing is installable to report (#2873, epic #2866 Phase 4a) |
| `installed-surface-resolver.cjs` | Installed Surface Resolver — `resolveInstalledSurfaces(runtime?, opts?)` probes both install scopes for a runtime (or every registered runtime, sorted, when omitted), reads each scope's manifest, and resolves the trigger surface across only the scopes actually installed on this machine, composing `resolveScope` and `resolveTriggerSurface` rather than re-deriving either (#2872, ADR-2866 Phase 3); local-scope manifest read is `lstat`-guarded and refuses to follow a symlinked config dir or manifest, degrading that scope to `installed: false` rather than following (#2873) |
| `installer-migration-authoring.cjs` | Installer migration authoring guardrails for record metadata, explicit scopes, ownership evidence, and runtime contract citations |
| `installer-migration-report.cjs` | Installer migration report projection and blocked-action guard for install/update integration |
| `installer-migrations.cjs` | Installer migration planning, artifact classification, install-state persistence, journaled apply, and rollback helpers |
| `intel.cjs` | Codebase intel store backing `/gsd-map-codebase --query` and `gsd-intel-updater` |
| `intel-command-router.cjs` | ADR-959 capability command router for `gsd-tools intel` — extracted from the `case 'intel':` arm in `gsd-tools.cjs`; dispatches query/status/diff/snapshot/patch-meta/validate/extract-exports/update/api-surface subcommands; preserves `timeAgo` transform on `status.files[*].updated_at` in non-raw mode; phase 4d-impl-4 (last first-party cutover) |
| `io.cjs` | CLI I/O primitives — `output`/`error` emission, JSON-error mode, and large-payload temp-file spillover (extracted from `core.cjs`, ADR-857) |
| `learnings.cjs` | Cross-phase learnings extraction for `/gsd-extract-learnings` |
| `legacy-cleanup.cjs` | Detect and remove leftover get-shit-done-cc artifacts; exports `planLegacyCleanup` (pure scan) and `applyLegacyCleanup` (thin IO applier) that root out stale files from the old package across every GSD-managed runtime config directory (#607) |
| `observability/logger.cjs` | DispatchLogger interface + default implementation — silent on success, structured stderr JSON on error, opt-in `.gsd-trace.jsonl` audit file (`GSD_AUDIT=1`), args omitted unless `GSD_AUDIT_ARGS=1` (#177, ADR-0174 P1.3) |
| `loop-host-contract.cjs` | Generated Loop Host Contract — 12 loop points, per-step agent roles, and core artifacts for the five-step pipeline (discuss/plan/execute/verify/ship); emitted by `scripts/gen-loop-host-contract.cjs --write` (ADR-894 §3); consumed by `gen-capability-registry.cjs` |
| `loop-resolver.cjs` | Loop Extension Point resolver — ADR-857 phase 3c/6 registry-consuming query; given a canonical loop point, filters `byLoopPoint` by resolved Capability State plus config activation (`when` key traversal with prototype-pollution guard), returns `{ point, activeHooks, rendered }` envelope; `resolveLoopHooks` and `renderLoopHooks` are pure (no I/O); command surface: `gsd-tools loop render-hooks <point> [--config-dir <path>]` |
| `markdown-sectionizer.cjs` | Canonical markdown-structure parsing seam (ADR-1372, epic #1372) — pure, Node built-ins only; exports `stripFencedCode` (CommonMark-correct fence stripper, CRLF-safe), `stripInlineCode` (per-line CommonMark inline-code-span stripper, #2365), `tokenizeHeadings` (ATX headings outside fenced blocks), `collectSections`/`collectSection` (line-by-line section collection with `bodyStart`/`bodyEnd` offsets), `iterateBullets` (dash/checkbox/numbered markers), `extractTaggedBlocks` (inner text of `<tag>…</tag>` blocks, caller decides fence-stripping), `replaceSection` (pure character-offset body splice for read-modify-write callers), and `withSection` (resolve a section by heading/predicate and run an edit callback against ONLY its body, splicing the result back — ADR-2143 §4 bounded mutation); foundation for T0–T7 migration tiers retiring 8+ ad-hoc parsers |
| `markdown-table.cjs` | Canonical GFM table model + `TABLE_SCHEMAS` registry seam (ADR-2143, epic #2143) — pure, Node built-ins only; exports `parseMarkdownTable(sectionText) → Result<MarkdownTable>` (parses the first GFM pipe table, typed parse errors for ragged/malformed rows rather than silent coercion), `MarkdownTable` (`{columns, rows}`, rows addressed by column name), `Result<T>` (`{ok:true,value}\|{ok:false,reason}` — distinct from command-routing-hub's dispatch `Result`), `TABLE_SCHEMAS` (canonical column-header variants for `RoadmapProgress`/`RequirementsTraceability`/`QuickTasks`/`Security` tables), and `matchTableSchema(columns) → {id,label}\|null` (resolves parsed headers back to a canonical schema); consumed by `phase-lifecycle.cts`'s `deriveProgressFromRoadmap` (fixes #2137, the 5-column milestone-grouped Progress table) |
| `mcp-catalog.cjs` | Serves GSD workflows, references, and commands as MCP resources and prompts (#3072) |
| `mcp-server.cjs` | Minimal MCP server exposing the command surface and state IO to any MCP host (#1681) |
| `health-diagnostic-rules/milestone-archive-hygiene.cjs` | Health-diagnostic rules: milestone archive + root hygiene checks (W018, W019), ported behavior-preserving from `cmdValidateHealth` (ADR-3180 §8.2/§8.3/§8.5, Phase 11, #3309) |
| `milestone.cjs` | Milestone archival, requirements marking |
| `model-adapter.cjs` | Abstracts model routing — passive tier-based selection or active host-supplied resolution (#1680) |
| `model-catalog.cjs` | CJS adapter over the shared model catalog JSON; exports canonical runtime tier defaults, agent profile maps, alias maps, and routing metadata for all CLI consumers |
| `model-profiles.cjs` | Backward-compatible profile helpers derived from `model-catalog.cjs`; no longer owns its own model table |
| `model-resolver.cjs` | Model/effort resolution policy — resolves model, tier, granularity, effort, and fast-mode for an agent from config + model profiles/catalog (extracted from `core.cjs`, ADR-857) |
| `onboard-projection.cjs` | Projects the onboarding situation from docs, package, and codebase-map readiness (#1671) |
| `package-identity.cjs` | Generated single source for GSD's published-package coordinates (npm name, bin name, repo slug, changelog URL, manual-install command), derived from package.json; read by the update worker, `check-latest-version`, and installer (#498) |
| `package-legitimacy.cjs` | Registry-API package legitimacy verdicts (OK/SUS/SLOP) from npm/PyPI/crates, slopcheck optional |
| `pattern.cjs` | The pattern-construction seam — `escapeRegex` (delegates to the built-in `RegExp.escape`) and `literalPattern`; sole owner of building a `RegExp` from a runtime value (ADR-3212 §1, epic #3212 Phase 1, #3412) |
| `phase-command-router.cjs` | Thin CJS subcommand router adapter for `gsd-tools phase` |
| `phase-estimation.cjs` | Pure phase-effort estimation — `estimate`/`actuals` schema parse+render, smart-zone budget classification, and estimate-vs-actual calibration (median ratio, clamped, sample-gated). Confidence is derived from calibration sample count, never self-rated (ADR-2629) |
| `phase-id.cjs` | Pure phase-id parsing/matching helpers — normalize, token match, milestone/phase-dir id parsing, phase-markdown regex builders (extracted from `core.cjs`, ADR-857) |
| `phase-lifecycle.cjs` | Pure-computation phase lifecycle helpers extracted from the phase-lifecycle SDK handler |
| `phase-locator.cjs` | Phase-directory search/location — active + archived phase-dir discovery, phase-id matching against the filesystem (extracted from `core.cjs`, ADR-857) |
| `health-diagnostic-rules/phase-structure.cjs` | Health-diagnostic rules: phase directory structure checks (W005, W023, I001, W009), ported behavior-preserving from `cmdValidateHealth` (ADR-3180 §8.2/§8.3/§8.5, Phase 11, #3309) |
| `phase.cjs` | Phase directory operations, decimal numbering, plan indexing |
| `phases-command-router.cjs` | Thin CJS subcommand router adapter for `gsd-tools phases` |
| `plan-dependency-graph.cjs` | Shared halt-propagation over a plan's `depends_on` DAG — the single topological-order + halt-propagation engine used by both `phase.cjs`'s wave-grouping and `phase-locator.cjs`'s phase-location primitive, so the two can never diverge on which plans a halted plan blocks (#2830) |
| `plan-document.cjs` | Canonical parser for a `*-PLAN.md` document BODY (compiled from `src/plan-document.cts`, gitignored; #2790) — `parsePlanDocument(content, planPath?)` returns `<objective>`, the `<task>` block rows (with the legacy `## Task N` heading fallback), per-task `<files>`/`<acceptance_criteria>`/`<done>`, and the frontmatter scheduling metadata (`wave`, `depends_on`, `autonomous`, `agent_hint`, `files_modified`); frozen `TASK_KIND` (`AUTO`/`CHECKPOINT`) so a `checkpoint:*` block is reported as its own kind rather than a malformed auto task. Extracted from `cmdPhasePlanIndex`'s inline loop so `phase.plan-index` and `planning.inspect` cannot drift; the invariant `taskCount === tasks.length === (xmlTaskCount \|\| mdTaskCount)` is preserved byte-for-behaviour |
| `plan-drift-guard.cjs` | Classifies symbol-verification severity against the ADR-22 authority ladder |
| `plan-scan.cjs` | Canonical phase-plan scanner for detecting plan and summary files in flat and nested layouts (k014) |
| `planning-command-router.cjs` | Thin CJS subcommand router for `gsd-tools planning` (compiled from `src/planning-command-router.cts`, gitignored; #2790) — one subcommand, `inspect`; v1 accepts no arguments, so a stray positional or unknown flag is a fail-loud `ERROR_REASON.USAGE` rather than a silently-ignored one |
| `planning-inspect.cjs` | Read-only schema-v1 canonical planning snapshot (compiled from `src/planning-inspect.cts`, gitignored; #2790) — `buildPlanningInspect(cwd)` / `cmdPlanningInspect`; `PLANNING_INSPECT_SCHEMA_VERSION = 1` is the wire contract consumers must reject other values of. Composed from the ADR-3180 §7 owners plus `parsePlanDocument`/`parseRequirements`/`parseUatItems`, and read through the Markdown Sectionizer + Markdown Table Model seams; deliberately declares its own flat external schema rather than serializing the still-growing `PlanningSnapshot`. Frozen `INSPECT_DIAGNOSTIC`/`TASK_STATUS`/`PROVENANCE`/`AGREEMENT` enums carry every non-answer — unknown or conflicting evidence is reported with a coded diagnostic, never inferred |
| `planning-scope.cjs` | Frozen `SCOPE` discriminator (`COMPLETE`/`TRUNCATED`/`UNSCOPED`/`UNREADABLE`) distinguishing a genuinely-empty derivation from one computed over a truncated or unscoped input, so callers can branch on the difference instead of reading a plausible zero (ADR-3180) |
| `planning-snapshot.cjs` | Parsed projection of `.planning/` composed exclusively from the ADR-3180 §7 owners (milestone identity, phase enumeration, phase completion, plan/summary counting, STATE.md current-phase) — exposes only scope-carrying parsed values, never raw document text, so a diagnostic rule cannot re-derive a field's location (ADR-3180 §8.1) |
| `planning-workspace.cjs` | Planning path/workstream seam (`planningDir`, `planningPaths`, active-workstream routing, `.planning/.lock` orchestration) |
| `project-root.cjs` | Resolves a project root from a starting directory using four heuristics (own `.planning/` guard, `sub_repos` config, `multiRepo` flag, `.git` heuristic) |
| `profile-output.cjs` | Profile rendering, USER-PROFILE.md and dev-preferences.md generation |
| `profile-pipeline-command-router.cjs` | ADR-959 capability command router for the profile-pipeline command family — dispatches scan-sessions, extract-messages, profile-sample (pipeline phase) and write-profile, profile-questionnaire, generate-dev-preferences, generate-claude-profile, generate-claude-md (output phase); phase 6 cutover |
| `profile-pipeline.cjs` | User behavioral profiling data pipeline, session file scanning |
| `prompt-budget.cjs` | Pure token-budget accounting for review prompts — estimates tokens, applies deterministic trim priority (head-shrink PROJECT.md, proportional plan truncation, drop context/research/requirements, hard-fail guard), returns structured metadata for `review.max_prompt_tokens` (#3081) |
| `observability/redaction.cjs` | Arg redaction policy for dispatch events — args omitted from every emitted event by default, opt-in verbatim inclusion via `GSD_AUDIT_ARGS=1`; stateless env read, no module-level caching (#177) |
| `real-home-guard.cjs` | Real-home confinement guard (#3712; renamed from `test-home-guard.cjs` — a source filename matching Node's `test-*` convention is collected and executed as a test by the remote runner) — refuses any of the six writers that resolve a kind `home` — `installRuntimeArtifacts`, `uninstallRuntimeArtifacts`, `applySurface`, `migrateLegacyDevPreferencesToSkill`, plus the descriptor-dependent `installOpencodeFamilySkills` and `installAgentsKindStandalone` when a `node --test` run would resolve a kind's global `home` override (codex skills -> `$HOME/.agents`, ADR-1239/#2088) inside the real passwd home, which silently pruned every `gsd-*` skill there; compares homes by filesystem identity (`st_dev`+`st_ino`) rather than by pathname, since a case-variant, symlinked, or bind-mounted HOME names one directory under two names; fails CLOSED unless both homes identify or one is definitively absent (the pathname-equality shortcut in `sameDirectory` can answer yes without identifying, so the marker branch requires the marker to identify separately before it may allow anything); a destination inside the real home is exempted only when HOME differs from the passwd home, the passwd home is not itself beneath that HOME (`/Users`, `C:\Users` are not sandboxes), and the destination resolves beneath it (Windows puts the temp root inside the home, so containment alone cannot tell a sandbox from the danger); where no passwd entry is readable it falls back to `sandboxHome()`'s path-valued marker, which must identify AND contain every resolved destination — a marker matching HOME attests only that HOME was sandboxed, so on its own it waved through a layout captured before the sandbox that still named the real `~/.agents`; it remains a deliberate weakening rather than a closed door, since nothing there can contradict a marker naming the real home; does not defend against a subordinate bind mount of the real directory into the sandbox (realpath cannot unify bind-mounted spellings) or a cross-process TOCTOU swap; inert for normal installs outside a Node test context |
| `refactor-trigger-command-router.cjs` | ADR-959 capability command router for `gsd-tools refactor` (issue #1953) — dispatches evaluate/status/accept/decline subcommands for the complexity-triggered refactor capability; owns capability-activation gating, git invocation (via the `git-base-branch.cjs` `phaseStartCommit`/`changedFilesSince` adapters), config reads, phase-directory resolution, and the optional broken-windows ledger integration around the pure `complexity-trigger.cjs` leaf |
| `research-provider.cjs` | Research provider waterfall, confidence tiers, and planResearch (cache-hits + fetch plan) |
| `research-store.cjs` | Content-addressed research cache: sha256 keys, per-source TTL staleness, two-tier (user ~/.gsd / project .planning) store |
| `resolution.cjs` | Defines the `Resolution` envelope carried by config-reading verbs, with provenance (#1411) |
| `retired-artifact-cleanup.cjs` | Manifest-safe cleanup for descriptor-declared retired runtime artifact surfaces; shared by install and profile/surface apply so removed layout kinds converge without deleting modified or unknown user files (#2644) |
| `probe-core.cjs` | Generic spec-phase probe resolution model (compiled from `src/probe-core.cts`, gitignored; ADR-550 Decision 7) — the status×verification re-cut (`status: resolved/dismissed/unresolved` × per-probe `verification`), `validateResolution`/`validateRequirement`, `analyzeCoverage(items, resolutions?, validators)` merge/rollup/orphan-reject, the `byVerification` rollup, and the `runProbeCli` I/O scaffold; the shared seam consumed by `edge-probe` (and the prohibition probe #644); exports `VALID_STATUS`, `validateResolution`, `validateRequirement`, `analyzeCoverage`, `runProbeCli` (#550) |
| `prohibition-enforcement.cjs` | Deterministic test-tier prohibition PRODUCER/gate (compiled from `src/prohibition-enforcement.cts`, gitignored; #1259, ADR-550 D5d "heavy half") — locates the wired mechanical check (`node-test` or `lint-rule`), confirms it is fail-first, runs it via an injectable runner, builds typed `enforcementEvidence`, and emits the `dispositionForProhibition` verdict; a passing wired check disposes green, a missing/failing/non-fail-first check hard-gates (flagged, non-green) in both interactive and autonomous modes; exports `runProhibitionEnforcement`, `routeProhibitionEnforcement`; CLI surface `gsd_run check prohibition-enforcement <request.json>` |
| `review-lane-descriptor.cjs` | Declared reviewer-lane contract (compiled from `src/review-lane-descriptor.cts`, gitignored; ADR-2782) — the frozen `REVIEWER_LANES` roster, the lane slug grammar, and two pure parity gates: `checkReviewerLaneParity` (descriptor ↔ roster ↔ registry, plus anti-parity against re-added bespoke workflow legs) and `checkReviewerDocsParity` (declared flags and section titles ↔ `docs/COMMANDS.md`, `docs/FEATURES.md` and their locale mirrors; #2800, closes #2781/#2272); exports `REVIEWER_LANES`, `PARITY_VIOLATION`, `DOCS_PARITY_VIOLATION`, `LANE_SLUG_RE` |
| `review-lane-invocation.cjs` | Pure projection from a declared reviewer lane plus resolved config to a concrete invocation plan (compiled from `src/review-lane-invocation.cts`, gitignored; ADR-2782 Phase 5b) — no filesystem, network or clock; config arrives through a `configGet` seam; exports `resolveLanePlan`, `LANE_UNAVAILABLE` |
| `review-lane-runner.cjs` | Execution of a reviewer-lane invocation plan (compiled from `src/review-lane-runner.cts`, gitignored; ADR-2782 Phase 5b) — probe, spawn or HTTP call, empty-output policy, egress-host check, and dispatch of the three first-party `handler` modules; exports `runLane`, `probeLane`, `checkEgressHost`, `writeReviewOrStub` |
| `review-reviewer-selection.cjs` | Reviewer selection/normalization helpers for `/gsd-review` default reviewer policy and precedence |
| `roadmap-command-router.cjs` | Thin CJS subcommand router adapter for `gsd-tools roadmap` |
| `health-diagnostic-rules/roadmap-disk-consistency.cjs` | Health-diagnostic rules: ROADMAP-vs-disk phase directory consistency checks (W006, W007), both resolved through the shared `matchPhaseDirs` matcher, ported behavior-preserving from `cmdValidateHealth` (ADR-3180 §8.2/§8.3/§8.5, Phase 11, #3309) |
| `roadmap-parser.cjs` | ROADMAP.md parsing — milestone slicing, current-milestone extraction, phase/milestone lookups, milestone-phase filter (extracted from `core.cjs`, ADR-857) |
| `roadmap-upgrade.cjs` | Migration tool for converting legacy `Phase N` entries to milestone-prefixed `Phase M-NN` convention; `computeMigrationPlan` + `applyMigration` with dry-run default and atomic rollback |
| `roadmap.cjs` | ROADMAP.md parsing, phase extraction, plan progress |
| `health-diagnostic-rules/root-existence.cjs` | Health-diagnostic rules: root `.planning/` existence + PROJECT.md checks (E002-E004, W001), ported behavior-preserving from `cmdValidateHealth` (ADR-3180 §8.2/§8.3/§8.5, Phase 11, #3309) |
| `runtime-artifact-conversion.cjs` | Runtime artifact conversion module — projects Claude-authored commands, agents, and skills into runtime-specific artifact bodies while preserving installer compatibility exports |
| `runtime-artifact-install-plan.cjs` | Runtime artifact install plan module — stages pre-resolved layout kinds, applies runtime body rewrites, and returns copy-plan items plus cleanup obligations |
| `runtime-artifact-layout.cjs` | Runtime artifact layout module — resolves the artifact directory shapes (commands, agents, skills) for each supported runtime; single source of truth for per-runtime artifact placement (#3663) |
| `runtime-config-adapter-registry.cjs` | Explicit runtime config adapter registry — resolves per-runtime config-mutation install intent (install surface, shared-settings gate, finish-phase permission writer); see ADR-58. |
| `runtime-hooks-surface.cjs` | Runtime hooks surface module — standalone hook-surface writer functions extracted from bin/install.js (ADR-857 phase 5f-1); owns Cline/Cursor/Copilot/Codex hook artifact generation and reconciliation. |
| `runtime-name-policy.cjs` | Runtime name normalization policy — canonical token sanitization for runtime identifiers used in path construction and display |
| `runtime-homes.cjs` | Canonical runtime → global config/skills directory mapping; first-class support for all 15 runtimes including Hermes nested layout and Cline rules-based exclusion (#3126) |
| `runtime-identity.cjs` | Runtime identity surface (#3146) — exports `classifyIdentityProbe` (pure, total; `(stdout, exitCode, spawnFailed, timedOut)` → `ok`/`identity_mismatch`/`no_identity_verb`/`unparseable`/`probe_failed`), `buildIdentityPayload`, `explainVerdict`, and the launcher gate's vocabulary — frozen `IDENTITY_STATUS` (`ok`/`unverified`), `statusForVerdict`, and the anchored `IDENTITY_RAW_PREFIX`; backs the `runtime-identity` verb, which the launcher preamble probes once before any verb runs (#3841) and which also serves as a manual diagnostic for telling this package's `gsd-tools` apart from the predecessor's colliding binary. The `PATH` route is closed structurally by resolving `gsd_run` rather than `gsd-tools`; the path-based branches are covered by that assertion |
| `runtime-slash.cjs` | Runtime-aware slash-command formatter — single source of truth for emitting `/gsd-<cmd>` (skills-based runtimes) and `$gsd-<cmd>` (codex) in user-facing output and persisted artifacts (#3584) |
| `schema-detect.cjs` | Schema-drift detection for ORM patterns (Prisma, Drizzle, Supabase, TypeORM, Payload); exports `detectSchemaFiles`, `detectSchemaOrm`, `checkSchemaDrift`, `SCHEMA_PATTERNS`, `ORM_INFO` |
| `secrets.cjs` | Secret-config masking convention (`****<last-4>`) for integration keys; exports `SECRET_CONFIG_KEYS`, `isSecretKey`, `maskSecret`, `maskIfSecret` |
| `section-manifest.cjs` | Pure `when=` evaluator over `InvocationFacts` (ADR-1671, epic #1671 Phase 5, #2932) — `selectSections` partitions a document-order list of parsed `gsd:section` sections into `included`/`excluded` id arrays for one concrete invocation, via `WHEN_PREDICATES`, a total lookup (never a parser) over the frozen `WHEN_VOCABULARY` imported unchanged from `workflow-fragments.cjs`; an unrecognized `when=` value fails closed (`REASON.UNKNOWN_WHEN`), and a coordinated-change guard at module load throws if a vocabulary entry has no predicate. Compiled from `src/section-manifest.cts` |
| `semver-compare.cjs` | Shared semver comparison policy helpers (`compareSemverCore`, stable-triplet validation, normalized tuple parsing) consumed by update-check hooks, statusline dev-install detection, and changeset extract range logic (#10) |
| `security.cjs` | Path traversal prevention, prompt injection detection, safe JSON/shell helpers |
| `shell-command-projection.cjs` | Runtime-aware shell command projection for managed hook serialization: decides PowerShell call-operator usage by runtime/platform and normalizes Windows script path tokens |
| `smart-entry.cjs` | Classifies workflow state into the enumerated smart-entry situations and their next actions (ADR-1787) |
| `spec-section.cjs` | SPEC section-status helper (compiled from `src/spec-section.cts`, gitignored) — the single source of truth for the canonical SPEC headings (suffix-tolerant) and markdown-table row counting; `specSectionStatus`/`countSectionDataRows` decide per-section "supplied" for plan-phase's spec-less probe fallback, replacing ad-hoc awk (contract pinned by `tests/spec-section.test.cjs`) |
| `stale-bake-guard.cjs` | Warns when configuration changes after a static-frontmatter runtime bake (#1688) |
| `state-command-router.cjs` | Thin CJS subcommand router adapter for `gsd-tools state` |
| `state-contract.cjs` | Machine-readable state contract v1 published to `.planning/state.json` at every step boundary (compiled from `src/state-contract.cts`, gitignored; #3227) — `buildStateContract(cwd, deps?)` is pure, `publishStateContract(cwd, deps?)` writes and never throws. `contract: "1.0.0"` is the wire version consumers gate on; frozen `PHASE_STATUS` (`complete`/`in_progress`/`pending`) and `PUBLISH_REASON` (`published`/`no_planning_dir`/`write_failed`) are the closed vocabularies. Composed from `locateProgressTable`, `getMilestoneInfo` and `classifyProject` so it can never disagree with GSD's own progress counters or front-door routing; owners are required lazily to avoid the `state → state-contract → smart-entry → state` require cycle. Best-effort by contract: it cannot change the exit code, stdout, or success of the boundary command that triggered it |
| `health-diagnostic-rules/state-consistency.cjs` | Health-diagnostic rules: STATE.md consistency checks (W002, W011, W021, W026) against config/ROADMAP/disk, ported behavior-preserving from `cmdValidateHealth`; W024 (state_head freshness) is a documented gap, deliberately not migrated (ADR-3180 §8.2/§8.3/§8.5, Phase 11, #3309) |
| `state-io.cjs` | Abstracts state IO modes — filesystem, sandboxed storage, or session log (#1680) |
| `state-transition.cjs` | Implements the STATE.md field-classification table and the pure `transitionCore` mutation path (#1769) |
| `state-md-schema.cjs` | The STATE.md field schema (compiled from `src/state-md-schema.cts`, gitignored; ADR-3473 §8.8, #3873) — one frozen, null-prototype `STATE_FIELD_SCHEMA` row per STATE.md key (type, cardinality, source, preservation, guard, mergeStrategy, body source/label, accepted value shapes, emitted-vs-guarded), replacing three previously hand-maintained tables (`FIELD_CLASSIFICATION` / `FRONTMATTER_BODY_SOURCE` in `state-transition.cjs`, `FRONTMATTER_KEY_TO_BODY_LABEL` in `state.cjs`) that now project from it at load time with byte-identical shape/order. Leaf module: imports from neither of its two consumers, avoiding the CJS require-cycle `health-diagnostic-types.cjs` was split out to break |
| `state.cjs` | STATE.md parsing, updating, progression, metrics |
| `state-document.cjs` | Pure STATE.md field extraction, replacement, status normalization, and progress calculation transforms |
| `milestone-lock.cjs` | Milestone lock (compiled from `src/milestone-lock.cts`, gitignored) — advisory (phase, session id) claim over STATE.md's single Current Position slot: `.planning/milestone.lock` claim IO, liveness (TTL + heartbeat), conflict detection, and the shared stderr warning; consumed by `state.begin-phase` / `state.advance-plan` / `phase.complete` so parallel phases in one working tree get a visible conflict instead of silently overwriting each other (#3311) |
| `surface.cjs` | Runtime surface module — manages the runtime enable/disable surface state independently of the install-time profile marker (ADR-0011 Phase 2) |
| `task-command-router.cjs` | Thin CJS subcommand router adapter for `gsd-tools task` |
| `teams-status.cjs` | Detects agent-teams status from environment and runtime; pure core (#1355) |
| `template.cjs` | Template selection and filling with variable substitution |
| `text-lines.cjs` | Line-terminator handling seam — `splitLines`/`normalizeEol`/`detectEol`/`joinLines`, the sole owner of `\r?\n` splitting and CRLF normalization; closes #3360's split-then-match fix in `frontmatter.cjs` (ADR-3212 §3, epic #3212 Phase 2, #3413) |
| `token-scanner.cjs` | Tokenizer-first seam for stateful grammars — `tokenizeShellLike` (quote-aware shell tokenizer, the primitive `hooks/lib/git-cmd.js` migrated onto) and `indentWidth` (bullet-nesting depth, closes #3169's cross-reference-vs-declaration false positive in `decisions.cts`) (ADR-3212 §4, epic #3212 Phase 3, #3414) |
| `normalize-test-command.cjs` | Normalizes a resolved test command to a one-shot form so a watch-mode runner (vitest/jest) cannot hang a verification gate (#1857); shared by all three live test-command gates (regression, post-merge, audit-fix) |
| `uat.cjs` | UAT file parsing, verification debt tracking, audit-uat support |
| `uat-predicate.cjs` | UAT-passed predicate — markdown-aware evaluation of HUMAN-UAT results; returns pass only when all required checks pass; ignores false-positive contexts (frontmatter, fenced code, blockquotes, HTML comments) |
| `ui-consideration-probe.cjs` | Spec-completeness UI-consideration probe (compiled from `src/ui-consideration-probe.cts`, gitignored) — the third adapter of the `probe-core` resolution model (ADR-550 Decision 7): element-kind classification, applicable-category relevance filter, consideration proposal, `proposeElements`/`autoResolve` (propose-then-confirm + the `--auto` never-dismiss floor), and the `{explicit, backstop}` validators; delegates merge/rollup/CLI to `probe-core`; exports `classifyElement`, `applicableCategories`, `proposeConsiderations`, `proposeElements`, `autoResolve`, `analyzeCoverage`, `UI_TAXONOMY` (#1867) |
| `ui-safety-gate.cjs` | Shell-free word-boundary UI token detector (#3706, #3718); reads phase-section text from stdin, exits 0 (UI found), 1 (no UI — real input, examined), NO_INPUT (empty/whitespace-only stdin) or UNAVAILABLE (stdin read failed) — the latter two are registry codes (ADR-3889 Phase 3, #3907); also deployed to `gsd-core/bin/lib/` so the GSD installer ships it to `$RUNTIME_DIR` (#448) |
| `ui-frontend-evidence.cjs` | Static frontend-evidence detector (compiled from `src/ui-frontend-evidence.cts`, gitignored) — plan-time structural corroboration for `computeUiPlanGate` (#3312): a `package.json` UI-framework dependency or a component-framework file (`*.tsx/*.jsx/*.vue/*.svelte`) in the tree, so a UI-token match on a hyphenated proper noun (e.g. repo `dashboard-financeiro`) cannot block planning in a repo with no frontend; mirrors the post-wave `computeUiSafetyGate` git-diff corroboration |
| `unusable-input.cjs` | Deduplicates stderr diagnostics for corrupt or unreadable configuration (#1879) |
| `update-context.cjs` | Pure install-context resolver for `/gsd-update` — runtime/scope/config-dir/version detection (LOCAL/GLOBAL/UNKNOWN) ported from update.md bash; backs `gsd-tools update-context` (#498) |
| `user-artifact-staging.cjs` | Durable, on-disk staging for `USER_OWNED_ARTIFACTS` across the preserve → wipe → restore window (compiled from `src/user-artifact-staging.cts`, gitignored; #2875, epic #2866 Phase 6, ADR-3574) — closes #1874-F19 (in-memory-only preservation lost on a crash between wipe and restore); `recoverOrphanedUserArtifacts` is wired at the start of `bin/install.js`'s `install()` so an orphaned staged copy from a prior crashed run is recovered before the ordinary preserve step, closing the #1879-F15 inert-fix failure mode; exports `stageUserArtifacts`, `restoreStagedUserArtifacts`, `discardStagedUserArtifacts`, `recoverOrphanedUserArtifacts` |
| `validate-command-router.cjs` | Thin CJS subcommand router adapter for `gsd-tools validate` |
| `validate.cjs` | Pure phase variant normalization helpers (`phaseVariants`, `buildRoadmapPhaseVariants`, `buildNotStartedPhaseVariants`) used by `verify.cjs` for W006/W007 checks; no I/O, no async |
| `verification-command-router.cjs` | Thin CJS subcommand router adapter for `gsd-tools verification` |
| `verification.cjs` | Verification-status routing — consolidates pass/gaps_found/human_needed status from phase verifier-emitted VERIFICATION.md frontmatter (#651) |
| `verify-command-grounding.cjs` | Verify-command path-resolvability probe (#2401) — pure `extractAutomatedCommands` (`<automated>` blocks + owning task, ReDoS-safe), `resolveVerifyCommandTarget` (grounds a leading `cd <literal>` chain or `npm --prefix <literal>` against the project root; three-state `ok`/`broken`/`unresolvable` plus `not_applicable`/`pending_creation`), `probePhaseVerifyCommands` (per-phase report backing `gsd-tools check verify-command-paths`), `harvestPriorVerifyCommands` (nearest prior phase's commands, surfaced to the planner ungated by `context_window`), and the failing-direction probe (#3172) — `extractFailingDirections` (pairs each `<fails_when>` to the nearest preceding `<automated>` in one document-order pass, first-wins), `resolveFailingDirection` (closed 6-atom status `ok`/`missing`/`empty`/`placeholder`/`sentinel`/`orphan`), and `probePhaseFailingDirections` (per-phase report backing `gsd-tools check verify-failure-directions`). Never executes command text — PLAN.md is model-authored — and never prescribes a replacement path or a failure statement. Compiled from `src/verify-command-grounding.cts` |
| `verify-command-router.cjs` | Thin CJS subcommand router adapter for `gsd-tools verify` |
| `verify.cjs` | Plan structure, phase completeness, reference, commit validation |
| `workflow-fragments.cjs` | In-file `<!-- gsd:section id= when= -->` marker parser/composer for GSD workflow markdown (ADR-1671, #2930) — `parseWorkflowSections` (fence/HTML-comment-aware document partition into explicit/gap sections, fail-closed on malformed/unclosed/nested/duplicate markers or an unknown `when=`), `toFragments` (maps sections to `context-composer.cjs` `verbatim` fragments — non-lossy by construction), and `renderFragments`/`composeWorkflow` (compose-within-budget then join, run BEFORE per-runtime converters so a marker attribute never reaches a path-rewrite regex). `WHEN_VOCABULARY` is a frozen 4-atom applicability set (`always`, `flag:--wave`, `state:gap-closure-phase`, `state:has-prior-phases`); widening it is an ADR amendment, not an organic edit. Compiled from `src/workflow-fragments.cts` |
| `workstream-inventory-builder.cjs` | Pure workstream inventory projection builder |
| `workstream-inventory.cjs` | Shared workstream inventory projection: state fields, phase/plan/summary counts, roadmap phase count, and active marker — thin orchestrator that delegates pure projection to `workstream-inventory-builder.cjs` |
| `workstream-name-policy.cjs` | Canonical workstream name validation (`isValidActiveWorkstreamName`, `hasInvalidPathSegment`, `validateWorkstreamName`) and slug normalization (`toWorkstreamSlug`) |
| `workstream.cjs` | Workstream CRUD, migration, session-scoped active pointer |
| `worktree-base-ref.cjs` | Worktree base-ref drift detection and degrade decision (`evaluateWorktreeBaseDegrade`) plus no-clobber `worktree.baseRef` settings management for the `base-check`/`set-baseref` subcommands (#683) |
| `health-diagnostic-rules/worktree-health.cjs` | Health-diagnostic rules: worktree health checks (W020, W017, W027 — the split-off stale-worktree subject), ported behavior-preserving from `cmdValidateHealth` (ADR-3180 §8.2/§8.3/§8.5, Phase 11, #3309) |
| `worktree-safety.cjs` | Worktree-root resolution and non-destructive prune policy decisions; owns W017 health-check logic |
| `vendor/js-yaml.cjs` | **Vendored third-party artifact, not a GSD module.** Verbatim copy of `js-yaml`'s UMD `dist` build (ADR-3473 §8.1, #3881) — the single YAML parser adopted to replace this repo's hand-rolled frontmatter scanner. Vendored because `gsd-core/bin/**` is copied into installed trees that have no `node_modules`, so it may contain no external requires (enforced by `local/no-external-require-in-bin`). Its type twin, `src/vendor/js-yaml.d.cts`, is hand-authored (js-yaml ships no `.d.ts` upstream and `@types/js-yaml` is not installed) and deliberately narrow — only `load`/`dump`/`FAILSAFE_SCHEMA`/`YAMLException` are declared, so anchors/aliases/custom types/`loadAll` are unreachable from typed code. Never hand-edit the `.cjs`; `scripts/lint-vendored-deps.cjs` byte-compares it against the pinned `js-yaml` devDependency in `lint:ci` (the hand-authored twin is excluded from that byte-compare — there is no upstream file to compare against). See `gsd-core/bin/lib/vendor/README.md` |
| `vendor/re2js.cjs` | **Vendored third-party artifact, not a GSD module.** Verbatim copy of `re2js`' CJS build — the RE2 linear-time regex engine used by `pattern.cjs` to evaluate untrusted `key_links` patterns without catastrophic backtracking (#3477). Vendored because `gsd-core/bin/**` is copied into installed trees that have no `node_modules`, so it may contain no external requires (enforced by `local/no-external-require-in-bin`). Never hand-edit; `scripts/lint-vendored-deps.cjs` byte-compares it against the pinned `re2js` devDependency in `lint:ci`. See `gsd-core/bin/lib/vendor/README.md` |
| `write-set.cjs` | Shared fail-loud `Result<T>` (`{ok:true,value}\|{ok:false,reason}`) and per-surface write-set contracts (ADR-2143, epic #2143) — `WriteOutcome` (`{surface,applied}`), `WriteSet` (`WriteOutcome[]`), and `writeSetComplete(ws)` (true only when the set is non-empty AND every surface applied, never an OR-into-one-flag); `markdown-table.cjs` re-exports `Result` from here so existing importers are unaffected; consumed by `milestone.cts`'s `requirements mark-complete` handler to report a structured per-surface (`checkbox`/`traceability`) write-set alongside its existing fields (fixes the structural half of #2140) |
[`docs/CLI-TOOLS.md`](CLI-TOOLS.md) may describe a subset of these modules; when it disagrees with the filesystem, this table and the directory listing are authoritative.
---
## Hooks
Full listing: `hooks/`.
| Hook | Event | Purpose |
|------|-------|---------|
| `gsd-statusline.js` | `statusLine` | Displays model, task, directory, context usage |
| `gsd-context-monitor.js` | `PostToolUse` / `AfterTool` | Injects agent-facing context warnings at 35%/25% remaining |
| `gsd-check-update.js` | `SessionStart` | Background check for new GSD versions |
| `gsd-check-update-worker.js` | (worker) | Background worker helper for check-update |
| `gsd-update-banner.js` | `SessionStart` | Opt-in banner surfacing update availability when GSD statusline isn't used (PR #2795) |
| `gsd-cursor-session-start.js` | Cursor `sessionStart` | Cursor-native context injection at session start (issue #777) |
| `gsd-cursor-post-tool.js` | Cursor `postToolUse` | Cursor-native STATE.md update monitor after tool calls (issue #777) |
| `gsd-cursor-pre-tool.js` | Cursor `preToolUse` | Cursor-native write-path guard for `.planning/` (ADR-1239 / #2089) |
| `gsd-cursor-stop.js` | Cursor `stop` | Cursor-native verify-work reminder on agent stop (ADR-1239 / #2089) |
| `gsd-cursor-subagent-start.js` | Cursor `subagentStart` | Cursor-native subagent context injection (ADR-1239 / #2089); hard-blocks an executor subagent whose session is not actually isolated when the project resolves to `harness-worktree` (#3045) |
| `gsd-cursor-subagent-stop.js` | Cursor `subagentStop` | Cursor-native subagent completion reminder (ADR-1239 / #2089) |
| `gsd-windsurf-pre-write.js` | Windsurf/Cascade `pre_write_code` | Blocking (exit-code-2) write-path guard — blocks a write resolving to a different git root than cwd, or inside `.git/` internals (ADR-1239 / #2100) |
| `gsd-windsurf-pre-command.js` | Windsurf/Cascade `pre_run_command` | Blocking (exit-code-2) destructive-command guard — conservative deny-list (`rm -rf` root/home wipes, force-push to a protected branch) (ADR-1239 / #2100) |
| `gsd-prompt-guard.js` | `PreToolUse` | Scans `.planning/` writes for prompt-injection patterns (advisory) |
| `gsd-workflow-guard.js` | `PreToolUse` | Detects file edits outside GSD workflow context (advisory, opt-in) |
| `gsd-read-guard.js` | `PreToolUse` | Advisory guard preventing Edit/Write on unread files |
| `gsd-read-injection-scanner.js` | `PostToolUse` | Scans tool Read results for prompt-injection patterns (v1.36+, PR #2201) |
| `gsd-worktree-path-guard.js` | `PreToolUse` | Hard-blocks Edit/Write/MultiEdit with absolute paths outside the worktree root (PR #579, #260) |
| `gsd-agent-isolation-guard.js` | `PreToolUse` | Hard-blocks an executor `Agent()` dispatch missing its harness isolation parameter when the project's resolved dispatch isolation is `harness-worktree` (#3045) |
| `gsd-write-guard.js` | `PreToolUse` | Hard-blocks a whole-file `Write` that catastrophically shrinks a curated `.planning/` artifact (ROADMAP.md, milestone roadmaps, STATE.md); override via the single-use sentinel `.planning/.gsd-allow-shrink` (workflow steps) or `GSD_ALLOW_PLANNING_SHRINK=1` (interactive) (#2255, fix 3 of #973) |
| `gsd-config-reload.js` | `FileChanged` | Hot-reloads GSD config context when `.planning/config.json` changes mid-session (#770) |
| `gsd-ensure-canonical-path.js` | `SessionStart` | Symlinks `~/.claude/gsd-core/{bin,contexts,references,templates,workflows}` to the plugin's bundled tree so `@~/.claude/gsd-core/...` includes resolve in marketplace plugin installs; no-op in classic installs, self-heals after `claude plugin update` (#997) |
| `gsd-session-state.sh` | `PostToolUse` | Session-state tracking for shell-based runtimes |
| `gsd-validate-commit.sh` | `PostToolUse` | Commit validation for conventional-commit enforcement |
| `gsd-phase-boundary.sh` | `PostToolUse` | Phase-boundary detection for workflow transitions |
| `gsd-graphify-update.sh` | `PostToolUse` | Auto-rebuild knowledge graph after main HEAD advances (opt-in, default off — #3347) |
| `gsd-node-runner.sh` | (helper) | Portable node resolver managed JS hook commands route through under `--portable-hooks`: install-time node path first, then `command -v node`, then well-known layouts — resolves at hook-fire time so a shared config root works in every environment (#3662) |
### Hook Library (`hooks/lib/`)
Shared modules a hook `require()`s relative to its own `__dirname`; not separately invoked and not part of the auto-checked `hooks` manifest family (`scripts/gen-inventory-manifest.cjs` walks `hooks/` non-recursively). New entries below are #3911's; the directory holds other pre-existing helpers (`cursor-workspace.js`, `git-cmd.js`, `injection-patterns.js`, `isolation-deny-reason.js`, `isolation-sentinel.js`, `gsd-graphify-rebuild.sh`) not enumerated here.
| Module | Purpose |
|--------|---------|
| `hook-exit.js` | Hand-written hook-facing exit vocabulary layered over `cli-exit.js`'s `terminateNow`: `allow(payload)` (exit 0), `deny(payload, stderrPayload?)` (exit 2), `crash(onCrash, payload)` dispatching per a REQUIRED `HOOK_ON_CRASH` policy — no default, so a hook cannot fail open by omission (ADR-3889 Phase 7, #3911) |
| `cli-exit.js` | Generated, git-tracked copy of `src/cli-exit.cts`'s `ExitError`/`runMain`/`terminateNow` seam, so a shipped hook can terminate without depending on `gsd-core/bin/lib/` tsc output. Regenerated by `scripts/gen-hooks-cli-exit.cjs --write`; byte-compared by `npm run lint:generated-sync` (#3911) |
| `exit-code-registry.js` | Generated, git-tracked copy of the exit-code registry (`gsd-core/bin/shared/exit-codes.json`) — `exitCodeFor`/`nameForExitCode`, pure and total over the closed table. Regenerated by `scripts/gen-exit-code-registry.cjs --write`; byte-compared by `npm run lint:generated-sync` (#3905/#3906/#3911, ADR-3889) |
---
## Maintenance
- When a new command, agent, workflow, reference, CLI module, or hook ships, update the corresponding section here before the release is cut.
- The drift-guard tests under `tests/` (see "How To Use This File" above) assert that every shipped file in the six flat families — agents, commands, workflows, references, CLI modules, hooks — is enumerated in this inventory. A new file in one of those without a matching row here will fail CI. Workflow `steps/` and `modes/` sub-files are the deliberate exception; see "Workflow Sub-Files" above.
- When the filesystem diverges from `docs/ARCHITECTURE.md` counts or from curated-subset docs (e.g. `docs/AGENTS.md`'s primary roster), this file is the source of truth.
## Related
- [Commands](COMMANDS.md) — user-facing command reference
- [Architecture](ARCHITECTURE.md) — how the surfaces fit together
- [docs index](README.md)
Reference in New Issue View Git Blame Copy Permalink