2ea5efc151
* enhance(#3911): give hooks an exit seam that needs no build ADR-3889 Phase 7 foundation. The 19 shipped enforcement hooks hold 91 of the epic's 128 terminators and cannot reach `terminateNow` today. The obvious route — requiring `gsd-core/bin/lib/cli-exit.cjs`, as gsd-agent-isolation-guard.js already does for two other modules — is rejected. That precedent carries its own warning (#3582): those files are tsc output, gitignored and absent on a raw plugin-marketplace or git-clone install, so the hook must first call ensureRuntimeBuild() to self-heal. Making the module a hook needs IN ORDER TO TERMINATE depend on a build inverts the dependency, and its failure mode is precisely the fail-open this phase exists to remove: a guard that cannot terminate cannot deny. `lint-hooks-runtime-build-seam` already encodes that concern, and Design B would have had to add an ensureRuntimeBuild() call to all 19 hooks to satisfy it. So `hooks/lib/` becomes a third emit location for cli-exit and a fifth for the registry, preserving the invariant `src/cli-exit.cts`'s own header states: it imports nothing but node:fs and its sibling registry, and the generator dual-emits that sibling alongside each copy so a relative require resolves next to whichever copy loaded it. Shipping needed no change — build-hooks.js already declares HOOKS_SUBDIRS_TO_COPY = ['lib']. Proven, not asserted: the two files are copied into an otherwise-empty tmpdir and a child process requires them and terminates — PASS exits 0, HOOK_DENY exits 2 with the payload on both stdout and stderr. That test fails the moment the hooks copy gains a require reaching outside hooks/lib/. Also fixed inline: the registry's fifth target let any `--write` test overwrite the real committed hooks/lib/exit-code-registry.js, because the test helper derived only three of the other output paths. It now redirects all five, and a regression test asserts every committed artifact is byte-identical after a redirected write. Install-tree goldens pick up the two new shipped paths across 11 runtimes — insertions only, no removals. lint:ci was green while they were stale, so this was found by regenerating rather than by a gate. Verification runs on the remote runner. Refs #3911 * enhance(#3911): declare a crash policy, and migrate the write guard Adds `hooks/lib/hook-exit.js` — the hook-facing vocabulary over `terminateNow`, hand-written because the cli-exit copy beside it is generated: allow(payload) exit 0 deny(payload, stderr?) exit 2 crash(onCrash, payload) whichever the hook DECLARED `crash()` takes the policy as a required argument with no default, which is the whole mechanism: fail-open by accident stops being expressible. A hook must name ALLOW or DENY at the call site, and an unrecognized value terminates INTERNAL rather than guessing. Fail-open stays legal; fail-open by omission does not. `gsd-write-guard.js` is the first hook migrated, all 12 sites, and it exposed a gap in the seam. `terminateNow`'s doc comment justified its fd-2 write by citing this hook's `emitBlock` — but modeled it as sending the same bytes to both streams, when `emitBlock` actually sends full JSON to stdout and only the bare `reason` string to stderr, because Kimi's hook bus feeds stderr verbatim back to the model. Migrating as written would have turned a readable sentence into a JSON blob for Kimi-backed agents. #3911 requires both "all 19 hooks terminate through terminateNow" and "no hook's effective default changes". Those are jointly satisfiable only by teaching the seam to carry a distinct stderr payload, so `terminateNow` gains an optional third argument: omitted, behavior is byte-for-byte what it was; a string is written raw, which is exactly the Kimi case. The doc comment's inaccurate claim about emitBlock is corrected in place. Proven rather than asserted: the pre-migration file is reconstructed from HEAD and driven with the same catastrophic-shrink payload as the migrated one — exit code, stdout and stderr all byte-identical. Verification runs on the remote runner. Refs #3911 * enhance(#3911): all 19 hooks terminate through the seam Migrates the remaining 18 enforcement hooks onto allow/deny/crash. An AST walk now reports zero `process.exit(` call sites across every `hooks/*.js` — down from the 91 the census measured. Each hook with an outer catch declares its policy once, at module top, with the reason that policy is right for that specific guard: a read guard that cannot scan must not block the read; a statusline that renders every prompt must degrade rather than crash; an injection scanner must not retroactively block a result already returned. Those sentences are the deliverable — they are what turns fail-open-by-accident into fail-open-on-purpose. No hook's effective default changed. Wiring exposed two defects, both fixed here rather than noted. A SECOND stdout/stderr-splitting site turned up in `gsd-workflow-guard.js`'s `emitForceAddBlock`, matching the pattern already known from the write guard — full JSON to stdout, bare reason to stderr for the Kimi bus. It uses the `stderrPayload` argument added in the previous commit, which is now carrying its second real caller rather than one special case. More seriously, `terminateNow` emitted both streams inside ONE try, so a payload that failed to serialize aborted before the stderr write ever ran. The two windsurf guards write nothing to stdout on a block and only a reason string to stderr, so `deny(undefined, reason)` exited 2 with EMPTY stderr — a deny that silently loses its reason, which is the exact "fails with success" class this epic exists to close. The streams are now emitted independently, each with its own guard, and `undefined` means "nothing to write for this stream" rather than an error. Regression tests inject a throwing write on one fd and assert the other still receives its payload; they fail against the single-try version. Byte-identity was proven per hook, not assumed: each pre-change file is reconstructed from HEAD and driven side by side with the migrated one across its normal path, its deny path, malformed stdin and empty stdin — exit code, stdout and stderr compared. Verification runs on the remote runner. Refs #3911 * enhance(#3911): harden the three shell hooks, and pin every hook's policy `gsd-phase-boundary.sh`, `gsd-session-state.sh` and `gsd-validate-commit.sh` gain `set -euo pipefail`. The expected hazard did not materialize, and that is worth recording: every intentionally-non-zero command in all three is already the condition of an `if`/`elif`, which `set -e` never fires on, and none of them reads a possibly-unset variable or pipes through a grep that may legitimately match nothing. No `|| true` guards were needed. Each hook was still checked command-by-command before the flags went in rather than after. Twenty-one before/after cases across the three hooks — disabled and enabled, planning and non-planning, missing STATE.md, malformed JSON, the Kimi payload shape, quoted and unquoted `-m`, valid and over-long Conventional Commits — all match on exit code, stdout and stderr. The hardening is shown to actually fire, not merely added: with a stubbed `node` that fails at the JSON-emit step, phase-boundary and session-state go from silently exiting 0 with empty stdout to failing visibly with the error surfaced. No such case could be constructed for `gsd-validate-commit.sh`, whose every statement already sits inside an if-condition — recorded as unproven rather than claimed. `tests/hooks-crash-policy.test.cjs` adds the per-hook coverage the issue asks for, table-driven over all 19 hooks rather than 76 hand-written cases: normal allow, deny where a deny path exists, crash-honors-the-declared-policy, and an unclosed-stdin case — the one `process.exitCode` structurally cannot serve. The deny assertions encode each hook's ACTUAL stream split rather than a uniform shape, since four of the six deliberately differ. A drift guard enumerates `hooks/*.js` and fails if a terminating hook is ever added without a row. Writing those tests surfaced two hooks that emit a block decision in their JSON body and exit 0. Both were checked rather than assumed, and neither is a fails-with-success: `gsd-read-injection-scanner.js` is PostToolUse, where the tool has already run and exit 2 has no meaning, and `gsd-cursor-subagent-start.js` follows Cursor's JSON-body protocol. They are deliberately left alone — a mechanical sweep to `deny()` would have broken exactly these two. Verification runs on the remote runner. Refs #3911 * fix(#3838): the commit validator says when it could not validate #3911 claims to subsume #3838. Measurement said otherwise, so this closes it for real rather than by assertion. `set -euo pipefail`, added earlier on this branch, does NOT fix #3838: bash exempts a command used as an `if` condition from `set -e`, and all three of the hook's swallow-and-pass sites are exactly that shape. Verified against the hardened hook with a node shim that fails only the classifier call — a non-conforming commit still exited 0 with empty stdout AND empty stderr, indistinguishable from "your commit conforms". That is the defect verbatim. All three sites named in #3838 now capture the real exit status instead of consuming it as a condition, and each distinguishes its genuine negative from "could not run": - the classifier: 0 = is a git commit, 1 = genuinely not one, anything else = could not classify. Its `node -e` now wraps the require and the call in try/catch and exits 3 on a throw, so a broken require chain can never be mistaken for `isGitSubcommand` legitimately returning false — which is the arm that matters, since `token-scanner.cjs` is a gitignored build artifact and a fresh checkout lands there. - the opt-in config read and the JSON command extraction get the same treatment. On "could not run" the hook emits a diagnostic to stderr naming which check failed and why, then exits 0. The issue confirms this is safe — it is a PreToolUse hook, so stderr does not disturb the JSON protocol — and ranks it the smallest sufficient fix. The gate still fails open, but it can no longer do so silently, which is the whole complaint: a validator that disables itself quietly costs more than one that is absent, because it is trusted. Both controls are unchanged and pinned by tests: a conforming commit still passes silently, a non-conforming one still exits 2 with its existing block payload. The defect test asserts stderr is non-empty and names the failure; it fails against the pre-fix hook. Verification runs on the remote runner. Refs #3911, #3838 * docs(#3911): document the hook crash-policy contract Reference and Explanation via a new docs/features fragment (FEATURES.md is generated from it), INVENTORY rows for the three new hooks/lib files, and an ARCHITECTURE note on the hooks section. How-To: docs/how-to/declare-a-hook-crash-policy.md, indexed from docs/README.md — a hook author now has to choose and declare a crash policy, which is more than one step and crosses into which harness protocol their hook speaks. It covers allow/deny/crash, writing an ON_CRASH reason that is actually useful, when a deny needs a distinct stderr payload, the two hooks whose harness reads a JSON-body decision and must NOT use deny(), and what to do when a check cannot run at all — with #3838 as the worked example. Refs #3911 * test(#3911): prove the seam actually ships, and stop hand-rolling temp cleanup Two review findings. The acceptance criterion 'hooks/dist/** stays in parity via the build seam (lint:hooks-runtime-build-seam)' was misstated and unmet: that lint checks something else — that a hook requiring a compiled gsd-core/bin/lib module also calls ensureRuntimeBuild(). Nothing exercised that the three new hooks/lib files reach hooks/dist/lib at all. That gap is not theoretical: #770 is a recorded ship-blocking bug where a new hook never shipped because a copy list missed it. The suite now builds dist through the repo's own ensureBuiltHooks(), byte-compares each shipped copy against its source, and spawns a child that requires the SHIPPED dist copy and denies — which is what catches a copy that exists but cannot resolve its sibling registry. gsd-validate-commit.sh hand-duplicated mktemp/run/rm three times; one idempotent trap on EXIT replaces them, guarded so cleanup cannot alter the exit status. Behavior-neutral across five cases, with temp-file counts taken before and after each run. Refs #3911 * fix(#3911): stage transitive hook lib requires, not just one level The remote run returned 7 failures across 3 real causes. The important one is a PRODUCTION bug this phase exposed rather than caused. `writeCursorHooksJson` scanned each hook script for `./lib/X` requires exactly one level deep and never re-scanned the lib files it staged for their own sibling requires. Nothing had a transitive lib dependency before, so the gap was invisible. Adding hook-exit.js -> cli-exit.js -> exit-code-registry.js made real Cursor installs ship a bundle that dies at require time with MODULE_NOT_FOUND. It now walks to a fixed point, and a real installed Cursor hook runs to completion. The staging harness in shared-hooks-dir-resolution hand-copied its fixture, so the injection scanner crashed at require time and its exit-1 was being read as a policy decision. Migrated to copyScriptWithDeps, which walks the require graph — the repo's recorded rule for this class, since adding another copyFileSync keeps it alive for the next person. The missing-lib-source test in cursor-hook-workspace-roots hardcoded which lib file it expected to be named in the abort message; the same throw now fires for a different file first. Its assertion is unchanged in substance — staging still must abort rather than ship a broken hook — only the name is no longer pinned. The last one was my own test asserting an uppercase reason code. Measured against origin/next: the pre-change hook emits the same lowercase 'config_unreadable', so the test was wrong, not the migration. Corrected to the real value rather than making the code match the test. Verification runs on the remote runner. Refs #3911 * chore(#3911): regenerate the cursor install-tree golden The staging fix means a Cursor install now correctly carries the two transitive lib files it was silently missing. Additive only — no path was removed. The golden diff is the evidence the packaging defect was real. Refs #3911 * chore(#3911): backfill the changeset PR number Refs #3911 * fix(#3911): a git probe that timed out is not a negative A macOS CI lane failed three deny cases at 2084ms, 2112ms and 2177ms — just past the 2000ms budget these hooks give their git probes. The three that passed took 72ms, 595ms and 651ms. Under shard contention `git rev-parse` overruns, the hook reads the non-zero result as "not a git repo", and allows with exit 0 and empty stdout AND empty stderr. Under load, the guards silently stop guarding. That is ADR-3889's thesis exactly, sitting inside the security hooks this phase is about. The repo had already recognized the class in one place — gsd-cursor-subagent-start.js fail-closed-denies on `git_timed_out` (#3045) — but nowhere else. `hooks/lib/git-probe.js` classifies a probe's outcome, distinguishing a real non-zero exit from ETIMEDOUT, a signal kill, and a spawn failure, rather than folding all four into `status !== 0`. Three guards route their eight git probes through it. The resolution is the same shape #3838 took, and the same one that issue endorsed as smallest-sufficient: fail open, but loudly. **No exit code changes on any path** — a developer on a loaded machine is still not blocked, which keeps #3911's declaration-pass contract intact for exit codes. What changes is that the hook now says on stderr which probe could not answer, instead of presenting silence as a clean verdict. Scope was checked across every hooks/*.js, not just the three that failed: gsd-agent-isolation-guard spawns no git; gsd-statusline's two probes gate only a cosmetic display segment, not an allow/deny decision, and are left alone. The C2 deny assertion was a real-race test — it demanded exit 2 while a slow git legitimately yields 0. It now requires the hook to either deny, or allow with a diagnostic naming the probe that could not run; a silent allow still fails, so the assertion is not vacuous. A deterministic regression stubs git on PATH to sleep past the budget rather than waiting for load to reproduce it. Verification runs on the remote runner. Refs #3911 * test(#3911): a PATH shim cannot intercept the hooks' git spawn on Windows The deterministic timeout regression stubbed git on PATH and asserted the guard reports rather than silently allows. It passes on Linux and macOS and failed on Windows in 83ms and 176ms — the stub was never invoked at all. Mechanism: the hooks call spawnSync('git', args) with no shell:true, so on Windows CreateProcess resolves git.exe only and never a PATH .cmd shim. The git.cmd branch could not have worked and is removed rather than left implying a Windows path that does. Adding shell:true to the hooks to serve a test would change product behavior and widen an injection surface, so the case is skipped on win32 only, with the mechanism written into the skip reason so a future reader does not 'fix' it that way. Linux and macOS keep the coverage, and macOS is where the underlying fail-open was actually caught. Refs #3911 --------- Co-authored-by: sim <sim@local>
748 lines
38 KiB
JavaScript
748 lines
38 KiB
JavaScript
import js from '@eslint/js';
|
|
import tseslint from 'typescript-eslint';
|
|
import globals from 'globals';
|
|
import pluginN from 'eslint-plugin-n';
|
|
import noOnlyTests from 'eslint-plugin-no-only-tests';
|
|
import { dirname } from 'path';
|
|
import { fileURLToPath } from 'url';
|
|
|
|
const __dirname = dirname(fileURLToPath(import.meta.url));
|
|
|
|
// Local plugin with custom AST rules
|
|
import noSourceGrep from './eslint-rules/no-source-grep.cjs';
|
|
import noMagicSleepInTests from './eslint-rules/no-magic-sleep-in-tests.cjs';
|
|
import noElapsedAssertion from './eslint-rules/no-elapsed-assertion.cjs';
|
|
import noRawRmsyncInTests from './eslint-rules/no-raw-rmsync-in-tests.cjs';
|
|
import noTautologicalAssert from './eslint-rules/no-tautological-assert.cjs';
|
|
import noAdhocMarkdownParsing from './eslint-rules/no-adhoc-markdown-parsing.cjs';
|
|
import noAdhocRegexEscape from './eslint-rules/no-adhoc-regex-escape.cjs';
|
|
import noPathLiteralInAssert from './eslint-rules/no-path-literal-in-assert.cjs';
|
|
import noPosixModeBitAssert from './eslint-rules/no-posix-mode-bit-assert.cjs';
|
|
import noUnguardedNonportableExec from './eslint-rules/no-unguarded-nonportable-exec.cjs';
|
|
import noCrlfFragileSplit from './eslint-rules/no-crlf-fragile-split.cjs';
|
|
import noUnboundedQuantifier from './eslint-rules/no-unbounded-quantifier.cjs';
|
|
import noHardcodedTmp from './eslint-rules/no-hardcoded-tmp.cjs';
|
|
import noBareNpmExec from './eslint-rules/no-bare-npm-exec.cjs';
|
|
import requireUserprofileWithHome from './eslint-rules/require-userprofile-with-home.cjs';
|
|
import normalizePathInContent from './eslint-rules/normalize-path-in-content.cjs';
|
|
import requireFsOpFallback from './eslint-rules/require-fs-op-fallback.cjs';
|
|
import noUnboundedSpawn from './eslint-rules/no-unbounded-spawn.cjs';
|
|
import noDuplicateFoldMarker from './eslint-rules/no-duplicate-fold-marker.cjs';
|
|
import requireSubprocessTimeout from './eslint-rules/require-subprocess-timeout.cjs';
|
|
import noExternalRequireInBin from './eslint-rules/no-external-require-in-bin.cjs';
|
|
import noPrivateBinaryResolution from './eslint-rules/no-private-binary-resolution.cjs';
|
|
|
|
const localPlugin = {
|
|
rules: {
|
|
'no-source-grep': noSourceGrep,
|
|
'no-magic-sleep-in-tests': noMagicSleepInTests,
|
|
'no-elapsed-assertion': noElapsedAssertion,
|
|
'no-raw-rmsync-in-tests': noRawRmsyncInTests,
|
|
'no-tautological-assert': noTautologicalAssert,
|
|
'no-adhoc-markdown-parsing': noAdhocMarkdownParsing,
|
|
'no-adhoc-regex-escape': noAdhocRegexEscape,
|
|
'no-path-literal-in-assert': noPathLiteralInAssert,
|
|
'no-posix-mode-bit-assert': noPosixModeBitAssert,
|
|
'no-unguarded-nonportable-exec': noUnguardedNonportableExec,
|
|
'no-crlf-fragile-split': noCrlfFragileSplit,
|
|
'no-unbounded-quantifier': noUnboundedQuantifier,
|
|
'no-hardcoded-tmp': noHardcodedTmp,
|
|
'no-bare-npm-exec': noBareNpmExec,
|
|
'require-userprofile-with-home': requireUserprofileWithHome,
|
|
'normalize-path-in-content': normalizePathInContent,
|
|
'require-fs-op-fallback': requireFsOpFallback,
|
|
'no-unbounded-spawn': noUnboundedSpawn,
|
|
'no-duplicate-fold-marker': noDuplicateFoldMarker,
|
|
'require-subprocess-timeout': requireSubprocessTimeout,
|
|
'no-external-require-in-bin': noExternalRequireInBin,
|
|
'no-private-binary-resolution': noPrivateBinaryResolution,
|
|
},
|
|
};
|
|
|
|
export default tseslint.config(
|
|
// ── Global ignores ─────────────────────────────────────────────────────────
|
|
{
|
|
ignores: [
|
|
'node_modules/**',
|
|
'**/dist/**',
|
|
'.worktrees/**',
|
|
'.claude/**',
|
|
'coverage/**',
|
|
'**/*.generated.cjs',
|
|
// ADR-457: tsc-generated runtime artifact — lint the src/*.cts source, not the emitted .cjs.
|
|
'gsd-core/bin/lib/claude-orchestration.cjs',
|
|
'gsd-core/bin/lib/claude-orchestration-command-router.cjs',
|
|
'gsd-core/bin/lib/semver-compare.cjs',
|
|
'gsd-core/bin/lib/host-integration.cjs',
|
|
'gsd-core/bin/lib/host-runtime-detection.cjs',
|
|
'gsd-core/bin/lib/handshake-serialized.cjs',
|
|
'gsd-core/bin/lib/host-integration-sdk.cjs',
|
|
'gsd-core/bin/lib/install-effort-resolver.cjs',
|
|
// #2875 Part 2 (epic #2866 Phase 6): tsc-generated runtime artifact —
|
|
// lint the src/install-model-override-resolver.cts source, not this.
|
|
'gsd-core/bin/lib/install-model-override-resolver.cjs',
|
|
'gsd-core/bin/lib/install-engine.cjs',
|
|
// #3712: tsc-generated runtime artifact — lint src/real-home-guard.cts, not this.
|
|
'gsd-core/bin/lib/real-home-guard.cjs',
|
|
// #2874 (epic #2866 Phase 5): tsc-generated runtime artifact — lint the
|
|
// src/install-fs-adapter.cts source, not this.
|
|
'gsd-core/bin/lib/install-fs-adapter.cjs',
|
|
// #2875 (epic #2866 Phase 6): tsc-generated runtime artifact — lint the
|
|
// src/user-artifact-staging.cts source, not this.
|
|
'gsd-core/bin/lib/user-artifact-staging.cjs',
|
|
'gsd-core/bin/lib/commonjs-marker.cjs',
|
|
'gsd-core/bin/lib/capability-loader.cjs',
|
|
'gsd-core/bin/lib/capability-source.cjs',
|
|
'gsd-core/bin/lib/capability-ledger.cjs',
|
|
'gsd-core/bin/lib/capability-trust.cjs',
|
|
'gsd-core/bin/lib/capability-lifecycle.cjs',
|
|
'gsd-core/bin/lib/capability-consent.cjs',
|
|
'gsd-core/bin/lib/capability-lock.cjs',
|
|
'gsd-core/bin/lib/resolution.cjs',
|
|
'gsd-core/bin/lib/unusable-input.cjs',
|
|
'gsd-core/bin/lib/plan-drift-guard.cjs',
|
|
// #2401: tsc-generated runtime artifact — lint the src/verify-command-grounding.cts source.
|
|
'gsd-core/bin/lib/verify-command-grounding.cjs',
|
|
'gsd-core/bin/lib/cli-exit.cjs',
|
|
'gsd-core/bin/lib/external-job.cjs',
|
|
'gsd-core/bin/lib/edge-probe.cjs',
|
|
'gsd-core/bin/lib/probe-core.cjs',
|
|
'gsd-core/bin/lib/spec-section.cjs',
|
|
'gsd-core/bin/lib/prohibition-enforcement.cjs',
|
|
'gsd-core/bin/lib/ui-consideration-probe.cjs',
|
|
'gsd-core/bin/lib/code-review-flags.cjs',
|
|
'gsd-core/bin/lib/code-review-depth.cjs',
|
|
'gsd-core/bin/lib/context-utilization.cjs',
|
|
'gsd-core/bin/lib/broken-windows.cjs',
|
|
'gsd-core/bin/lib/complexity-trigger.cjs',
|
|
// issue #1953: tsc-generated runtime artifact — lint the src/refactor-trigger-command-router.cts source.
|
|
'gsd-core/bin/lib/refactor-trigger-command-router.cjs',
|
|
'gsd-core/bin/lib/api-coverage.cjs',
|
|
'gsd-core/bin/lib/artifacts.cjs',
|
|
'gsd-core/bin/lib/assumption-delta.cjs',
|
|
'gsd-core/bin/lib/state-transition.cjs',
|
|
// #3873: tsc-generated runtime artifact — lint the src/state-md-schema.cts source, not this.
|
|
'gsd-core/bin/lib/state-md-schema.cjs',
|
|
'gsd-core/bin/lib/command-arg-projection.cjs',
|
|
'gsd-core/bin/lib/clock.cjs',
|
|
'gsd-core/bin/lib/ui-safety-gate.cjs',
|
|
// #3312: tsc-generated runtime artifact — lint the src/ui-frontend-evidence.cts source.
|
|
'gsd-core/bin/lib/ui-frontend-evidence.cjs',
|
|
'gsd-core/bin/lib/review-reviewer-selection.cjs',
|
|
'gsd-core/bin/lib/review-lane-descriptor.cjs',
|
|
'gsd-core/bin/lib/review-lane-invocation.cjs',
|
|
'gsd-core/bin/lib/review-lane-runner.cjs',
|
|
'gsd-core/bin/lib/clusters.cjs',
|
|
'gsd-core/bin/lib/installer-migrations/001-legacy-orphan-files.cjs',
|
|
'gsd-core/bin/lib/observability/redaction.cjs',
|
|
'gsd-core/bin/lib/installer-migration-report.cjs',
|
|
'gsd-core/bin/lib/prompt-budget.cjs',
|
|
'gsd-core/bin/lib/secrets.cjs',
|
|
'gsd-core/bin/lib/smart-entry.cjs',
|
|
'gsd-core/bin/lib/phase-lifecycle.cjs',
|
|
// #3227: tsc-generated artifact — lint src/state-contract.cts, not this.
|
|
'gsd-core/bin/lib/state-contract.cjs',
|
|
'gsd-core/bin/lib/workstream-name-policy.cjs',
|
|
'gsd-core/bin/lib/decisions.cjs',
|
|
'gsd-core/bin/lib/validate.cjs',
|
|
'gsd-core/bin/lib/schema-detect.cjs',
|
|
'gsd-core/bin/lib/runtime-name-policy.cjs',
|
|
'gsd-core/bin/lib/runtime-slash.cjs',
|
|
'gsd-core/bin/lib/observability/event.cjs',
|
|
'gsd-core/bin/lib/workstream-inventory-builder.cjs',
|
|
'gsd-core/bin/lib/plan-scan.cjs',
|
|
'gsd-core/bin/lib/fallow-runner.cjs',
|
|
'gsd-core/bin/lib/project-root.cjs',
|
|
'gsd-core/bin/lib/installer-migration-authoring.cjs',
|
|
'gsd-core/bin/lib/update-context.cjs',
|
|
'gsd-core/bin/lib/installer-migrations/000-first-time-baseline.cjs',
|
|
'gsd-core/bin/lib/installer-migrations/008-cursor-retire-commands-surface.cjs',
|
|
'gsd-core/bin/lib/retired-artifact-cleanup.cjs',
|
|
'gsd-core/bin/lib/runtime-homes.cjs',
|
|
'gsd-core/bin/lib/model-catalog.cjs',
|
|
'gsd-core/bin/lib/configuration.cjs',
|
|
'gsd-core/bin/lib/state-document.cjs',
|
|
'gsd-core/bin/lib/planning-snapshot.cjs',
|
|
// #2790: tsc-generated runtime artifacts — lint the src/*.cts sources
|
|
// (src/planning-inspect.cts, src/planning-command-router.cts,
|
|
// src/plan-document.cts), not these emitted .cjs files.
|
|
'gsd-core/bin/lib/planning-inspect.cjs',
|
|
'gsd-core/bin/lib/planning-command-router.cjs',
|
|
'gsd-core/bin/lib/plan-document.cjs',
|
|
'gsd-core/bin/lib/pattern.cjs',
|
|
'gsd-core/bin/lib/text-lines.cjs',
|
|
'gsd-core/bin/lib/token-scanner.cjs',
|
|
// #3311: tsc-generated runtime artifact — lint src/milestone-lock.cts, not this.
|
|
'gsd-core/bin/lib/milestone-lock.cjs',
|
|
'gsd-core/bin/lib/health-diagnostic-types.cjs',
|
|
'gsd-core/bin/lib/health-diagnostic.cjs',
|
|
'gsd-core/bin/lib/health-diagnostic-rules/root-existence.cjs',
|
|
'gsd-core/bin/lib/health-diagnostic-rules/state-consistency.cjs',
|
|
'gsd-core/bin/lib/health-diagnostic-rules/config-validation.cjs',
|
|
'gsd-core/bin/lib/health-diagnostic-rules/phase-structure.cjs',
|
|
'gsd-core/bin/lib/health-diagnostic-rules/agent-install.cjs',
|
|
'gsd-core/bin/lib/health-diagnostic-rules/roadmap-disk-consistency.cjs',
|
|
'gsd-core/bin/lib/health-diagnostic-rules/worktree-health.cjs',
|
|
'gsd-core/bin/lib/health-diagnostic-rules/milestone-archive-hygiene.cjs',
|
|
'gsd-core/bin/lib/health-diagnostic-rules/consistency.cjs',
|
|
// #2873 (epic #2866 Phase 4): tsc-generated runtime artifact — lint the
|
|
// src/health-diagnostic-rules/install-surface-shadowing.cts source.
|
|
'gsd-core/bin/lib/health-diagnostic-rules/install-surface-shadowing.cjs',
|
|
'gsd-core/bin/lib/shell-command-projection.cjs',
|
|
'gsd-core/bin/lib/security.cjs',
|
|
'gsd-core/bin/lib/command-aliases.cjs',
|
|
'gsd-core/bin/lib/config-schema.cjs',
|
|
'gsd-core/bin/lib/model-profiles.cjs',
|
|
'gsd-core/bin/lib/model-resolver.cjs',
|
|
'gsd-core/bin/lib/loop-resolver.cjs',
|
|
'gsd-core/bin/lib/capability-state.cjs',
|
|
'gsd-core/bin/lib/capability-activation.cjs',
|
|
'gsd-core/bin/lib/federated-config.cjs',
|
|
'gsd-core/bin/lib/installer-migrations/002-codex-legacy-hooks-json.cjs',
|
|
'gsd-core/bin/lib/installer-migrations/003-rename-get-shit-done-to-gsd-core.cjs',
|
|
'gsd-core/bin/lib/installer-migrations/004-prune-stale-pristine-snapshots.cjs',
|
|
'gsd-core/bin/lib/installer-migrations/005-opencode-baseline-commands-dir.cjs',
|
|
// 007 is tsc output like its siblings, but unlike 006 it imports node
|
|
// builtins — so tsc emits its `__importDefault` helper, which uses `var`
|
|
// and trips no-var. ADR-457: the linted source is the .cts.
|
|
'gsd-core/bin/lib/installer-migrations/007-retire-config-root-commonjs-marker.cjs',
|
|
// 009 also imports node builtins (fs, path) like 007, so tsc emits the
|
|
// same `__importDefault` helper. ADR-457: the linted source is the .cts.
|
|
'gsd-core/bin/lib/installer-migrations/009-pi-retire-reserved-hooks-dir.cjs',
|
|
// 010 also imports node builtins (fs, path) like 007/009, so tsc emits
|
|
// the same `__importDefault` helper. ADR-457: the linted source is the .cts.
|
|
'gsd-core/bin/lib/installer-migrations/010-antigravity-retire-confighome-artifacts.cjs',
|
|
'gsd-core/bin/lib/observability/logger.cjs',
|
|
'gsd-core/bin/lib/active-workstream-store.cjs',
|
|
'gsd-core/bin/lib/adr-parser.cjs',
|
|
'gsd-core/bin/lib/graphify.cjs',
|
|
'gsd-core/bin/lib/graphify-command-router.cjs',
|
|
'gsd-core/bin/lib/audit-command-router.cjs',
|
|
'gsd-core/bin/lib/intel-command-router.cjs',
|
|
'gsd-core/bin/lib/install-profiles.cjs',
|
|
'gsd-core/bin/lib/intel.cjs',
|
|
'gsd-core/bin/lib/installer-migrations.cjs',
|
|
'gsd-core/bin/lib/worktree-safety.cjs',
|
|
'gsd-core/bin/lib/worktree-base-ref.cjs',
|
|
'gsd-core/bin/lib/planning-workspace.cjs',
|
|
'gsd-core/bin/lib/planning-scope.cjs',
|
|
'gsd-core/bin/lib/command-roster.cjs',
|
|
'gsd-core/bin/lib/runtime-artifact-conversion.cjs',
|
|
'gsd-core/bin/lib/runtime-artifact-install-plan.cjs',
|
|
'gsd-core/bin/lib/runtime-artifact-layout.cjs',
|
|
'gsd-core/bin/lib/install-scope.cjs',
|
|
'gsd-core/bin/lib/installed-surface-resolver.cjs',
|
|
// #2873 (epic #2866 Phase 4): tsc-generated runtime artifact — lint the
|
|
// src/install-shadow-report.cts source.
|
|
'gsd-core/bin/lib/install-shadow-report.cjs',
|
|
'gsd-core/bin/lib/runtime-config-adapter-registry.cjs',
|
|
'gsd-core/bin/lib/runtime-hooks-surface.cjs',
|
|
'gsd-core/bin/lib/command-routing-hub.cjs',
|
|
'gsd-core/bin/lib/core-utils.cjs',
|
|
'gsd-core/bin/lib/io.cjs',
|
|
'gsd-core/bin/lib/phase-id.cjs',
|
|
'gsd-core/bin/lib/phase-estimation.cjs',
|
|
'gsd-core/bin/lib/estimate-cli.cjs',
|
|
'gsd-core/bin/lib/normalize-test-command.cjs',
|
|
'gsd-core/bin/lib/config-loader.cjs',
|
|
'gsd-core/bin/lib/phase-locator.cjs',
|
|
'gsd-core/bin/lib/plan-dependency-graph.cjs',
|
|
'gsd-core/bin/lib/roadmap-parser.cjs',
|
|
'gsd-core/bin/lib/drift.cjs',
|
|
'gsd-core/bin/lib/cjs-command-router-adapter.cjs',
|
|
'gsd-core/bin/lib/phase-command-router.cjs',
|
|
'gsd-core/bin/lib/surface.cjs',
|
|
'gsd-core/bin/lib/roadmap-upgrade.cjs',
|
|
'gsd-core/bin/lib/config-types.cjs',
|
|
'gsd-core/bin/lib/phases-command-router.cjs',
|
|
'gsd-core/bin/lib/verify-command-router.cjs',
|
|
'gsd-core/bin/lib/verification.cjs',
|
|
'gsd-core/bin/lib/verification-command-router.cjs',
|
|
'gsd-core/bin/lib/eval.cjs',
|
|
'gsd-core/bin/lib/eval-command-router.cjs',
|
|
'gsd-core/bin/lib/init-command-router.cjs',
|
|
'gsd-core/bin/lib/onboard-projection.cjs',
|
|
'gsd-core/bin/lib/agent-command-router.cjs',
|
|
'gsd-core/bin/lib/agent-install-check.cjs',
|
|
// ADR-2313 Phase 3 (#3243): tsc-generated runtime artifact — lint the src/codex-agent-toml.cts source.
|
|
'gsd-core/bin/lib/codex-agent-toml.cjs',
|
|
'gsd-core/bin/lib/task-command-router.cjs',
|
|
'gsd-core/bin/lib/validate-command-router.cjs',
|
|
'gsd-core/bin/lib/workstream-inventory.cjs',
|
|
'gsd-core/bin/lib/roadmap-command-router.cjs',
|
|
'gsd-core/bin/lib/state-command-router.cjs',
|
|
'gsd-core/bin/lib/gap-checker.cjs',
|
|
'gsd-core/bin/lib/gate-predicate-evaluator.cjs',
|
|
'gsd-core/bin/lib/config.cjs',
|
|
'gsd-core/bin/lib/profile-output.cjs',
|
|
'gsd-core/bin/lib/commands.cjs',
|
|
'gsd-core/bin/lib/state.cjs',
|
|
'gsd-core/bin/lib/milestone.cjs',
|
|
'gsd-core/bin/lib/phase.cjs',
|
|
'gsd-core/bin/lib/verify.cjs',
|
|
'gsd-core/bin/lib/init.cjs',
|
|
'gsd-core/bin/lib/docs.cjs',
|
|
'gsd-core/bin/lib/check-command-router.cjs',
|
|
'gsd-core/bin/lib/frontmatter.cjs',
|
|
'gsd-core/bin/lib/learnings.cjs',
|
|
'gsd-core/bin/lib/gsd2-import.cjs',
|
|
'gsd-core/bin/lib/profile-pipeline.cjs',
|
|
'gsd-core/bin/lib/template.cjs',
|
|
'gsd-core/bin/lib/uat.cjs',
|
|
'gsd-core/bin/lib/coverage.cjs',
|
|
'gsd-core/bin/lib/uat-predicate.cjs',
|
|
'gsd-core/bin/lib/workstream.cjs',
|
|
'gsd-core/bin/lib/roadmap.cjs',
|
|
'gsd-core/bin/lib/audit.cjs',
|
|
'gsd-core/bin/lib/research-store.cjs',
|
|
'gsd-core/bin/lib/research-provider.cjs',
|
|
'gsd-core/bin/lib/package-legitimacy.cjs',
|
|
// ADR-457: tsc-generated runtime artifact — lint the src/git-base-branch.cts source.
|
|
'gsd-core/bin/lib/git-base-branch.cjs',
|
|
// ADR-1213: tsc-generated runtime artifact — lint the src/capability-writer.cts source.
|
|
'gsd-core/bin/lib/capability-writer.cjs',
|
|
// issue #1754: tsc-generated runtime artifact — lint the src/cli-skew-check.cts source.
|
|
'gsd-core/bin/lib/cli-skew-check.cjs',
|
|
// issue #3146: tsc-generated runtime artifact — lint the src/runtime-identity.cts source.
|
|
'gsd-core/bin/lib/runtime-identity.cjs',
|
|
// issue #1355: tsc-generated runtime artifact — lint the src/teams-status.cts source.
|
|
'gsd-core/bin/lib/teams-status.cjs',
|
|
// ADR-1372: tsc-generated runtime artifact — lint the src/markdown-sectionizer.cts source.
|
|
'gsd-core/bin/lib/markdown-sectionizer.cjs',
|
|
// ADR-2143: tsc-generated runtime artifact — lint the src/markdown-table.cts source.
|
|
'gsd-core/bin/lib/markdown-table.cjs',
|
|
// ADR-2143: tsc-generated runtime artifact — lint the src/write-set.cts source.
|
|
'gsd-core/bin/lib/write-set.cjs',
|
|
// ADR-1239 Phase C-1 (#1680): tsc-generated — lint src/embedding-adapter.cts + src/adapter-declarative.cts.
|
|
'gsd-core/bin/lib/embedding-adapter.cjs',
|
|
'gsd-core/bin/lib/adapter-declarative.cjs',
|
|
'gsd-core/bin/lib/adapter-imperative.cjs',
|
|
'gsd-core/bin/lib/model-adapter.cjs',
|
|
'gsd-core/bin/lib/hook-bus.cjs',
|
|
'gsd-core/bin/lib/state-io.cjs',
|
|
'gsd-core/bin/lib/external-descriptor-trust.cjs',
|
|
'gsd-core/bin/lib/mcp-server.cjs',
|
|
// #3072: tsc-generated runtime artifact — lint the src/mcp-catalog.cts source.
|
|
'gsd-core/bin/lib/mcp-catalog.cjs',
|
|
// ADR-1671 (#2928): tsc-generated runtime artifact — lint the src/context-predicates.cts source.
|
|
'gsd-core/bin/lib/context-predicates.cjs',
|
|
// #2929: tsc-generated runtime artifact — lint the src/context-composer.cts source.
|
|
'gsd-core/bin/lib/context-composer.cjs',
|
|
// ADR-1671 (#2930): tsc-generated runtime artifact — lint the src/workflow-fragments.cts source.
|
|
'gsd-core/bin/lib/workflow-fragments.cjs',
|
|
// ADR-1671 Phase 5 (#2932): tsc-generated runtime artifact — lint the src/section-manifest.cts source.
|
|
'gsd-core/bin/lib/section-manifest.cjs',
|
|
// #3477 follow-up: verbatim third-party artifact vendored so gsd-core/bin/**
|
|
// carries zero external requires (installed trees have no node_modules).
|
|
// See gsd-core/bin/lib/vendor/README.md; never lint/edit these by hand.
|
|
'gsd-core/bin/lib/vendor/**',
|
|
// Source-side twin of the same vendored .d.cts (needed so tsc resolves
|
|
// types for the relative './vendor/re2js.cjs' import from
|
|
// src/pattern.cts — module resolution for a .cts source is relative to
|
|
// src/, not the output dir). Same verbatim-third-party exemption.
|
|
'src/vendor/**',
|
|
// #3904 (ADR-3889 Phase 0): tsc-generated runtime artifact — generated
|
|
// by scripts/gen-scripts-cli-exit.cjs from a fresh compile of
|
|
// src/cli-exit.cts, and byte-guarded by `npm run lint:generated-sync`
|
|
// (stricter than lint: it forbids ANY hand edit, not just bad ones).
|
|
// Lint the src/cli-exit.cts source, not this emitted copy.
|
|
'scripts/lib/cli-exit.cjs',
|
|
// #3911 (ADR-3889 Phase 7): tsc-generated runtime artifact — generated
|
|
// by scripts/gen-hooks-cli-exit.cjs from the SAME fresh compile of
|
|
// src/cli-exit.cts (sibling registry require rewritten to `.js`), and
|
|
// byte-guarded by `npm run lint:generated-sync`. Lint the
|
|
// src/cli-exit.cts source, not this emitted copy.
|
|
'hooks/lib/cli-exit.js',
|
|
],
|
|
},
|
|
|
|
// ── src/**/*.cts — TypeScript runtime sources (ADR-457 build-at-publish) ─────
|
|
// First-class type-aware linting on the migrated source. The TS compiler
|
|
// (`npm run build:lib`, strict + noEmitOnError) is the primary type gate;
|
|
// these rules add lint-level coverage. warn-first per the harness convention.
|
|
{
|
|
files: ['src/**/*.cts'],
|
|
plugins: {
|
|
local: localPlugin,
|
|
},
|
|
extends: [tseslint.configs.recommendedTypeChecked],
|
|
languageOptions: {
|
|
parserOptions: {
|
|
project: './tsconfig.build.json',
|
|
tsconfigRootDir: __dirname,
|
|
},
|
|
},
|
|
rules: {
|
|
'@typescript-eslint/no-unused-vars': ['warn', { argsIgnorePattern: '^_', varsIgnorePattern: '^_' }],
|
|
// ADR-1372 T7: enforce use of the markdown-sectionizer seam; grandfather
|
|
// pre-migration sites with // allow-adhoc-markdown: <reason>
|
|
'local/no-adhoc-markdown-parsing': 'error',
|
|
// ADR-3212 Phase 1 (#3412): enforce the pattern-construction seam
|
|
// (src/pattern.cts's escapeRegex/literalPattern) — flags a re-inlined
|
|
// escape-all-metachars .replace() helper or an unrouted new RegExp()
|
|
// from a runtime value.
|
|
'local/no-adhoc-regex-escape': 'error',
|
|
// ADR-3212 Phase 2 (#3413): widen the CRLF-fragile-split prohibition from tests/ to src/.
|
|
'local/no-crlf-fragile-split': 'error',
|
|
// ADR-3212 Phase 4 (#3415): bound quantifiers over document content (CWE-1333, #2128 class).
|
|
'local/no-unbounded-quantifier': 'error',
|
|
// ADR-1703 Phase 5: flag path-returning calls interpolated into content
|
|
// (markdown @-references, workflow files, generated docs) without POSIX
|
|
// normalization. Promoted to 'error' after precision review (path.basename
|
|
// excluded; content heuristic tightened to genuine reference/config-dir
|
|
// markers). See RULESET.CONTENT-PATH-NORMALIZATION in CONTEXT.md.
|
|
'local/normalize-path-in-content': 'error',
|
|
// ADR-1703 Phase 6: flag an unguarded fs.rename/fs.renameSync (the
|
|
// atomic-publish primitive) that lacks a transient-errno fallback
|
|
// (EPERM/EBUSY/EACCES retry or a Windows platform guard). See
|
|
// DEFECT.WINDOWS-FS-OPS in CONTEXT.md.
|
|
'local/require-fs-op-fallback': 'error',
|
|
// Flag execSync/execFileSync/spawnSync without a `timeout` option — an
|
|
// unbounded sync subprocess hangs indefinitely on a stuck remote/large
|
|
// repo/missing network (DEFECT.UNBOUNDED-SUBPROCESS in CONTEXT.md).
|
|
// The 8 pre-existing call sites this surfaced were migrated in #2896.
|
|
'local/require-subprocess-timeout': 'error',
|
|
// #3477 follow-up: every src/**/*.cts module compiles 1:1 into
|
|
// gsd-core/bin/lib/*.cjs, which ships into installed trees with no
|
|
// node_modules — and the emitted mirror is almost always
|
|
// eslint-ignored as a generated artifact (see the src/pattern.cts note
|
|
// in eslint-rules/no-external-require-in-bin.cjs), so this is the ONLY
|
|
// place a bad external import in an already-migrated module is still
|
|
// visible to lint.
|
|
'local/no-external-require-in-bin': 'error',
|
|
// #3619 (epic #3411 Phase 3): flag a re-implemented Windows binary
|
|
// resolver — a PATHEXT read or a hardcoded exe-extension list — outside
|
|
// the platform seam (src/shell-command-projection.cts, exempt by path).
|
|
// See .gsd/phase/chore-3619-no-bare-binary-spawn/40-design.md.
|
|
'local/no-private-binary-resolution': 'error',
|
|
},
|
|
},
|
|
|
|
// ── bin/install.js + scripts/build-hooks.js — ADR-1703 Phase 6 glob expansion ─
|
|
// The top-level `bin/install.js` (generated installer) and `scripts/build-hooks.js`
|
|
// (the build-side atomic-replace helper) are the two production surfaces named by
|
|
// DEFECT.WINDOWS-FS-OPS that were NOT covered by the src/**/*.cts / gsd-core/bin/**/*.cjs
|
|
// globs (ADR-1703 L124-126). This block brings them under the two production
|
|
// portability rules. It deliberately does NOT apply the full js.recommended set —
|
|
// bin/install.js is ~12k lines of generated code; the ADR's mandate is the
|
|
// portability defect surface, not a broader generated-code style sweep.
|
|
{
|
|
files: ['bin/install.js', 'bin/gsd-mcp-server.js', 'scripts/build-hooks.js'],
|
|
plugins: {
|
|
local: localPlugin,
|
|
},
|
|
languageOptions: {
|
|
sourceType: 'commonjs',
|
|
globals: {
|
|
...globals.node,
|
|
},
|
|
},
|
|
rules: {
|
|
'local/normalize-path-in-content': 'error',
|
|
'local/require-fs-op-fallback': 'error',
|
|
// ADR-3212 Phase 1 (#3412): pattern-construction seam prohibition —
|
|
// scripts/build-hooks.js is a .js file, so it falls outside the
|
|
// scripts/**/*.cjs glob below and needs it registered here too.
|
|
'local/no-adhoc-regex-escape': 'error',
|
|
},
|
|
},
|
|
|
|
// ── gsd-core/bin/**/*.cjs + scripts/**/*.cjs ───────────────────────────
|
|
// CommonJS Node files: js.recommended + eslint-plugin-n + local plugin rules
|
|
// eslint-rules/**, bin/lib/**, pi/**, examples/**, vscode/*.js, .kilo/plugins/*.js,
|
|
// and .opencode/plugins/*.js were previously unmatched by every glob in this config
|
|
// (drift guard scripts/lint-eslint-glob-coverage.cjs, #3059). All are CommonJS
|
|
// (require/module.exports); folded into this block rather than duplicated.
|
|
{
|
|
files: [
|
|
'gsd-core/bin/**/*.cjs',
|
|
'scripts/**/*.cjs',
|
|
'eslint-rules/**/*.cjs',
|
|
'bin/lib/**/*.cjs',
|
|
'pi/**/*.cjs',
|
|
'examples/**/*.cjs',
|
|
'vscode/*.js',
|
|
'.kilo/plugins/*.js',
|
|
'.opencode/plugins/*.js',
|
|
],
|
|
plugins: {
|
|
n: pluginN,
|
|
local: localPlugin,
|
|
},
|
|
languageOptions: {
|
|
sourceType: 'commonjs',
|
|
globals: {
|
|
...globals.node,
|
|
},
|
|
},
|
|
rules: {
|
|
...js.configs.recommended.rules,
|
|
// Generic quality rules
|
|
'no-var': 'error',
|
|
'prefer-const': 'warn',
|
|
'no-unused-vars': ['warn', {
|
|
argsIgnorePattern: '^_',
|
|
varsIgnorePattern: '^_',
|
|
caughtErrors: 'none',
|
|
}],
|
|
'no-empty': ['warn', { allowEmptyCatch: true }],
|
|
// Downgraded from recommended error → warn (pre-existing violations; follow-up to fix)
|
|
'no-useless-escape': 'warn',
|
|
'no-unsafe-finally': 'warn',
|
|
// eslint-plugin-n rules
|
|
'n/no-process-exit': 'error',
|
|
'n/no-path-concat': 'error',
|
|
// Promoted to error (#3313) — a fresh non-cached `npx eslint .` run found
|
|
// zero live violations of this rule in this glob at promotion time.
|
|
'local/no-source-grep': 'error',
|
|
// ADR-3212 Phase 1 (#3412): pattern-construction seam prohibition —
|
|
// see the src/**/*.cts block above for detail.
|
|
'local/no-adhoc-regex-escape': 'error',
|
|
},
|
|
},
|
|
|
|
// ── gsd-core/bin/**/*.cjs only — no-external-require-in-bin ────────────────
|
|
// A NARROWER block than the combined glob above on purpose: gsd-core/bin/**
|
|
// is the ONLY surface in that shared glob that is copied verbatim into
|
|
// installed trees with no node_modules (scripts/**, eslint-rules/**,
|
|
// bin/lib/**, pi/**, examples/**, vscode/*.js, .kilo/plugins/*.js, and
|
|
// .opencode/plugins/*.js all run inside THIS repo checkout, where
|
|
// node_modules exists, and legitimately require npm packages). Registering
|
|
// this rule on the shared block above would falsely flag every one of
|
|
// those. #3477 follow-up: re2js was the live instance of this defect —
|
|
// src/pattern.cts (compiled to gsd-core/bin/lib/pattern.cjs) shipped
|
|
// `import { RE2JS } from 're2js'` and broke `verify` for every installed
|
|
// user until the dependency was vendored under gsd-core/bin/lib/vendor/.
|
|
{
|
|
files: ['gsd-core/bin/**/*.cjs'],
|
|
plugins: {
|
|
local: localPlugin,
|
|
},
|
|
languageOptions: {
|
|
sourceType: 'commonjs',
|
|
globals: {
|
|
...globals.node,
|
|
},
|
|
},
|
|
rules: {
|
|
'local/no-external-require-in-bin': 'error',
|
|
// #3619 (epic #3411 Phase 3): see the src/**/*.cts block above for detail.
|
|
'local/no-private-binary-resolution': 'error',
|
|
},
|
|
},
|
|
|
|
// ── scripts/**/*.cjs only — no-private-binary-resolution ───────────────────
|
|
// A NARROWER block than the combined CommonJS glob above, on purpose:
|
|
// eslint-rules/** is deliberately OUTSIDE this rule's surface, because
|
|
// eslint-rules/lib/portability-vocab.cjs is the single source of truth for
|
|
// the Windows executable-extension set (ADR-1703 rule 4) — its own
|
|
// WINDOWS_EXECUTABLE_EXTENSIONS vocabulary array would trip the rule it
|
|
// feeds. Registering on the shared `gsd-core/bin/**/*.cjs + scripts/**/*.cjs
|
|
// + eslint-rules/**/*.cjs + ...` block would flag that file; this block
|
|
// covers scripts/**/*.cjs only, so the rule still lints every other script
|
|
// in the tree without the vocabulary file self-flagging.
|
|
{
|
|
files: ['scripts/**/*.cjs'],
|
|
plugins: {
|
|
local: localPlugin,
|
|
},
|
|
languageOptions: {
|
|
sourceType: 'commonjs',
|
|
globals: {
|
|
...globals.node,
|
|
},
|
|
},
|
|
rules: {
|
|
// #3619 (epic #3411 Phase 3): see the src/**/*.cts block above for detail.
|
|
'local/no-private-binary-resolution': 'error',
|
|
},
|
|
},
|
|
|
|
// ── hooks/**/*.js — enforcement hooks (#3059) ──────────────────────────────
|
|
{
|
|
files: ['hooks/**/*.js', 'hooks/**/*.cjs'],
|
|
plugins: { n: pluginN, local: localPlugin },
|
|
languageOptions: { sourceType: 'commonjs', globals: { ...globals.node } },
|
|
rules: {
|
|
...js.configs.recommended.rules,
|
|
'no-var': 'error',
|
|
'prefer-const': 'warn',
|
|
'no-unused-vars': ['warn', { argsIgnorePattern: '^_', varsIgnorePattern: '^_', caughtErrors: 'none' }],
|
|
'no-empty': ['warn', { allowEmptyCatch: true }],
|
|
'no-useless-escape': 'warn',
|
|
'n/no-path-concat': 'error',
|
|
// ADR-3212 Phase 1 (#3412): pattern-construction seam prohibition.
|
|
'local/no-adhoc-regex-escape': 'error',
|
|
// #3619 (epic #3411 Phase 3): see the src/**/*.cts block above for detail.
|
|
'local/no-private-binary-resolution': 'error',
|
|
// n/no-process-exit is deliberately OFF for hooks ONLY.
|
|
//
|
|
// A hook is a standalone process whose ENTIRE contract is its exit code: the
|
|
// harness reads exit 2 as "deny". `process.exitCode = N; return;` is not
|
|
// equivalent — it lets execution continue past the denial, and several exits
|
|
// here are load-bearing in a way that makes that a behavior change, not a
|
|
// refactor:
|
|
// - stdin-timeout guards (e.g. hooks/gsd-read-guard.js, gsd-cursor-subagent-stop.js)
|
|
// fire from a setTimeout where NOTHING else terminates the process if stdin
|
|
// never closes;
|
|
// - hooks/gsd-worktree-path-guard.js exits from a nested `if` whose fallthrough
|
|
// would otherwise reach a different unconditional exit;
|
|
// - hooks/gsd-write-guard.js:159-175 documents that pipe writes are async on
|
|
// Windows, so it deliberately does fs.writeSync(1/2, ...) BEFORE process.exit(2)
|
|
// to avoid truncation.
|
|
// ADR-0012 and ADR-0174 scope the "never calls process.exit" convention to the
|
|
// Command Routing Hub (src/command-routing-hub.cts), not to hooks. Rewriting 89
|
|
// call sites in enforcement hooks to satisfy a rule aimed at libraries would trade
|
|
// a real behavior risk for a cosmetic win. See .gsd/phase/chore-3059-eslint-glob-coverage-guard/40-design.md.
|
|
'n/no-process-exit': 'off',
|
|
},
|
|
},
|
|
|
|
// ── root *.mjs config files (#3059) ────────────────────────────────────────
|
|
{
|
|
files: ['*.mjs'],
|
|
languageOptions: { sourceType: 'module', globals: { ...globals.node } },
|
|
rules: { ...js.configs.recommended.rules },
|
|
},
|
|
|
|
// ── tests/**/*.test.cjs ─────────────────────────────────────────────────────
|
|
{
|
|
files: ['tests/**/*.cjs'],
|
|
plugins: {
|
|
'no-only-tests': noOnlyTests,
|
|
local: localPlugin,
|
|
},
|
|
languageOptions: {
|
|
sourceType: 'commonjs',
|
|
globals: {
|
|
...globals.node,
|
|
},
|
|
},
|
|
rules: {
|
|
...js.configs.recommended.rules,
|
|
'no-only-tests/no-only-tests': 'error',
|
|
// Timing anti-patterns — ratcheted to error after cleanup (all violations fixed)
|
|
'local/no-magic-sleep-in-tests': 'error',
|
|
// Promoted warn->error by #3331 once #3314 delivered its precondition (ADR-456 §(a) amended,
|
|
// direct-use modules backfilled with deterministic time control) — see TESTING-STANDARDS.md.
|
|
'local/no-elapsed-assertion': 'error',
|
|
// Ban raw fs.rmSync in tests — use helpers.cleanup() for Windows-EBUSY retry budget
|
|
'local/no-raw-rmsync-in-tests': 'error',
|
|
// Ban tautological assertions (always-truthy arg or identical-literal equality)
|
|
'local/no-tautological-assert': 'error',
|
|
// Ban source-grep pattern in tests — use require() + behavior assertions instead
|
|
'local/no-source-grep': 'error',
|
|
// Ban path-returning calls compared to hardcoded POSIX-slash literals (fails on Windows)
|
|
'local/no-path-literal-in-assert': 'error',
|
|
// Ban POSIX mode-bit assertions compared to octal literals (fails on Windows)
|
|
'local/no-posix-mode-bit-assert': 'error',
|
|
// Ban unguarded chmod exec-bit + sh/bash -c combos (fails on Windows Git Bash)
|
|
'local/no-unguarded-nonportable-exec': 'error',
|
|
// Ban CRLF-fragile file-content splits and regex patterns (ADR-1703 Phase 4)
|
|
'local/no-crlf-fragile-split': 'error',
|
|
// ADR-3212 Phase 4 (#3415): bound quantifiers over document content (CWE-1333, #2128 class).
|
|
'local/no-unbounded-quantifier': 'error',
|
|
// Ban hardcoded /tmp/ paths in fs.* calls (ADR-1703 Phase 4)
|
|
'local/no-hardcoded-tmp': 'error',
|
|
// Ban bare npm exec without shell:true (ADR-1703 Phase 4)
|
|
'local/no-bare-npm-exec': 'error',
|
|
// Require USERPROFILE alongside HOME assignments (ADR-1703 Phase 4)
|
|
'local/require-userprofile-with-home': 'error',
|
|
// Ban unbounded sync child_process spawns in tests (DEFECT.UNBOUNDED-SUBPROCESS).
|
|
// No allowlist: the epic (#3064) migrated every site; the rule runs with no
|
|
// exemption surface. The only sanctioned escapes are an explicit `timeout` on
|
|
// a raw spawn or the `// allow-spawn-timeout-ceiling: <reason>` marker.
|
|
'local/no-unbounded-spawn': 'error',
|
|
// Ban a consolidation-epic folded suite appearing twice in one host file (#3271).
|
|
// A second copy runs the same tests twice on every lane and drifts silently.
|
|
'local/no-duplicate-fold-marker': 'error',
|
|
// ADR-3212 Phase 1 (#3412): pattern-construction seam prohibition —
|
|
// see the src/**/*.cts block above for detail. The historical oracle
|
|
// inlined in tests/pattern.test.cjs is exempted per-finding with
|
|
// // allow-adhoc-regex-escape: comments (design doc Notes: "not a 13th
|
|
// production copy").
|
|
'local/no-adhoc-regex-escape': 'error',
|
|
// Ban raw setTimeout sync + elapsed/duration-style assertions via no-restricted-syntax
|
|
'no-restricted-syntax': [
|
|
'error',
|
|
{
|
|
selector: 'AwaitExpression > NewExpression[callee.name="Promise"] ArrowFunctionExpression CallExpression[callee.name="setTimeout"]',
|
|
message: 'Raw setTimeout used for synchronization in tests. Use proper async patterns instead.',
|
|
},
|
|
{
|
|
selector: 'CallExpression[callee.object.name="Atomics"][callee.property.name="wait"]',
|
|
message: 'Atomics.wait() used as a sleep in tests. Use a proper async wait pattern instead.',
|
|
},
|
|
],
|
|
'no-unused-vars': ['warn', {
|
|
argsIgnorePattern: '^_',
|
|
varsIgnorePattern: '^_',
|
|
caughtErrors: 'none',
|
|
}],
|
|
'no-empty': ['warn', { allowEmptyCatch: true }],
|
|
// Downgraded from recommended error → warn (pre-existing violations; follow-up to fix)
|
|
'no-useless-escape': 'warn',
|
|
'no-regex-spaces': 'warn',
|
|
'no-control-regex': 'error',
|
|
'no-irregular-whitespace': 'warn',
|
|
},
|
|
},
|
|
|
|
// ── #1279 lint-rule fail-first fixture ──────────────────────────────────────
|
|
// `tests/_ff_lint_violation.cjs` is a PLAIN `.cjs` (NOT `*.test.cjs`) on purpose: it is a KNOWN
|
|
// `local/no-source-grep` violation that `defaultProveFailFirst` lints to machine-prove the rule
|
|
// has teeth, and it must stay OFF the `node --test` runner glob (executing it ENOENTs on the
|
|
// intentional `lib/foo.cjs` path). It still needs the `local` plugin registered so its inline
|
|
// `/* eslint-disable local/no-source-grep */` resolves (otherwise `eslint .` errors "rule not
|
|
// found") and the violation lands in `suppressedMessages` (which the prover reads), keeping the
|
|
// project's own `eslint .` green. (#1279)
|
|
{
|
|
files: ['tests/_ff_lint_violation.cjs'],
|
|
plugins: { local: localPlugin },
|
|
languageOptions: { sourceType: 'commonjs', globals: { ...globals.node } },
|
|
rules: { 'local/no-source-grep': 'error' },
|
|
},
|
|
// ── #2126 lint-rule CLEAN fixture ───────────────────────────────────────────
|
|
// `tests/_ff_lint_clean.cjs` is the KNOWN-CLEAN companion to the violation fixture: the
|
|
// prohibition-enforcement real-runner tests lint it as their non-vacuous "clean target" instead of
|
|
// a type-aware `src/**/*.cts` file, so each eslint spawn is ~0.8s (non-type-aware) not ~2s
|
|
// (whole-tsconfig-program load) — removing the CPU starvation that blew the 60s bound under
|
|
// --test-concurrency. Rule enabled (as error) so the pass is non-vacuous; the file is clean so it
|
|
// greens. PLAIN `.cjs`, kept OFF the `*.test.cjs` runner glob. (#2126)
|
|
{
|
|
files: ['tests/_ff_lint_clean.cjs'],
|
|
plugins: { local: localPlugin },
|
|
languageOptions: { sourceType: 'commonjs', globals: { ...globals.node } },
|
|
rules: { 'local/no-source-grep': 'error' },
|
|
},
|
|
|
|
// ── #2453 Command Routing Hub: uniform handler signature ────────────────────
|
|
// Every route handler in gsd-tools.cjs is declared with the SAME destructured
|
|
// signature — `function routeX({ args, cwd, raw, error })` — whether or not it
|
|
// uses all four members. That uniformity is the point: it is the dispatch
|
|
// contract, so a handler can be moved or added without re-deriving which
|
|
// members exist.
|
|
//
|
|
// `argsIgnorePattern: '^_'` is structurally in conflict with that convention:
|
|
// satisfying it would mean `_`-prefixing ~50 parameters, which makes the
|
|
// signature non-uniform across the table and defeats the contract. So args
|
|
// checking is disabled HERE ONLY.
|
|
//
|
|
// `varsIgnorePattern` is deliberately left intact: genuinely dead *variables*
|
|
// (the #2379 case — unused `require()` results) must still surface. This
|
|
// narrows the exemption to the one category the convention actually forces.
|
|
//
|
|
// Decision deferred by #732 ("Severities stay `warn` (no config change in this
|
|
// pass)"), resolved by #2453 option 1.
|
|
{
|
|
files: ['gsd-core/bin/gsd-tools.cjs'],
|
|
rules: {
|
|
'no-unused-vars': ['warn', {
|
|
args: 'none',
|
|
varsIgnorePattern: '^_',
|
|
caughtErrors: 'none',
|
|
}],
|
|
},
|
|
},
|
|
);
|